Delta DTP and Delete Overlapping Requests
Hi,
Please check the article:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36
-Vikram
Hi
In the Delete Overlapping Requests from Infocube Process there is an button Deletion Selections Check what are all the options selected in that there are some 3 check boxes like
a) Only Delete Requests from Same DTP
b) Only Delete Full DTP Requets
c) Only Delete DTP Requests from Same Source
if option B is checked it will work only for Full Requests not for Delta. Check the same in your system.
Thanks
Similar Messages
-
DTP and Deleting overlapping requests
Do we have the option to delete overlapping requests when using DTP to load data? Thanks
hi ,
Pls create a process chain.
1. Add Delete Overlapping Requests from InfoCube .
2. In the deletion selection check : Conditions:
mark : Only delete request from same DTP
Only delete full DTP request
Only delete full DTP request from Same source
Then Mark : Overalapping.
In the DTP : Add date in the Filter .(Cal/Year Mth) ..You can use variable also.
hope this helps ..
Regards,
shikha -
DTP Questions: Delete overlapping requests; Repair Full Request
Hello,
I'm new with the DTP concept in BI 7.0.
It is clear to me how DTP is working for normal loads like: full, delta, delta without data transfer etc.
But I don't see where I can specifies "Delete overlapping requests". Is this still possible in a DTP, or is it only possible by creating a Process Chain and insert the process-type "delete overlapping requests" ?
Also I have a question about "Repair Full request" using DTP. Is this option still possible ? Or do I have to create a DTP with extraction-mode = Full => Extraction from Active table. => Is delta than still working ?
Thanks for your input,
Wim<b>But I don't see where I can specifies "Delete overlapping requests". Is this still possible in a DTP, or is it only possible by creating a Process Chain and insert the process-type "delete overlapping requests" ?</b>
This option is available <b>only in Process Chains</b> when u use DTP's.
/people/community.user/blog/2007/06/21/sap-netweaver-70-bi-data-transfer-process-with-147only-get-delta-once148
/people/community.user/blog/2007/06/21/sap-netweaver-70-bi-data-transfer-process-with-147get-data-by-request148
<b>Also I have a question about "Repair Full request" using DTP. Is this option still possible ? Or do I have to create a DTP with extraction-mode = Full => Extraction from Active table. => Is delta than still working ?</b>
Full Load was made Repair Full to Initialize if loading an ODS but however you dont need to worry abt the same in Netweaver 7.0 as DTP is taking care of the loading from PSA to DSO.
Initialization can be done after a full load as the load is <b>only till PSA</b> ( At Datasource Level ).
DTP doesnot require any initialization.
U can jst do a Delta DTP after a Full DTP to a DSO or u can even start with a Delta DTP directly.
For the first time -> Delta DTP = Full DTP !! -
Data Transfer Process and Delete Overlapping Requests
Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
ScottHi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks -
DTP and "Deleting Existing Request"
Hello Gurus
I have a Doubt whith DTP
In 3.X i used Infopackage (in full update) , and sometimes i used the OPtion "deleting request after update" which have the same Infosource, the same datasource and the same system source.
In DTP i don't find any option. Do you you think FULL UPADTE will have the same proprieties ?
Thank for your helpWith DTP. there are two ways to achieve this.
you can include "DELETE EXISTING REQUEST" process type in the process chain.
delete PSA
execute infopack
drop index
Execute DTP
Delete existing request
generate index
other way
delete PSA
execute infopack
delete data target contents (if its loading from only one source)
schedule DTP
generate index -
Hi All,
I am trying to use the process type Delete Overlapping Requests from cube in Process chain after loading the data from the Infopack full load and DTP Delta . With the infopackage selection in process type the message after execution is no overlapping request found.
Deletion selection I used is Full or Init loads, Same Datasource. and Selection are same or more comprehensive.
And in the infopackage I dont have any selections.
Please help me to solve this error.
Regards
PVC i'll explain our scenario..
there was data loaded from 2 data sources to one cube thru 2 dtp's from 2 DS's in process chain...
Soon after the 2 DTP steps, delete overlapping request step is defined from both the ends.in chain...in whcih variant is
object type: the same DTP and its name which loads from PSA to cube.
radio button selected as: edit all infocubes with following delete selections.
selections: delete existing request under which Only delete request from the same DTP.
same or cmprehensive.
the other variant is defined as the same but with another DTP name in object type..
the Output of the cube will be only latest(current day) requests..
rgds, -
Delete overlapping requests of same DTP from cube
Dear All,
i want to delete over lapping requests of same DTP in cube, but here while i am searching for the DTP in process variant, the system is not showing the DTP(it is active).
can you people have any suggestions.
Br,
Vamshi.Hey Vamshi,
Is your DTP a full one or delta one ? Delete Overlapping reqs is not possible for Delta loads.
In Load Process and Post-Processing option you will find Delete Overlapping Requests from InfoCube, drag and drop and make the following settings:
Object Type = DTP
Object Name : DTP Name.
Check Edit all InfoCubes with the following Delete Selections and click on Delection Selection
Check Delete Existing Request and check Only Delete Req from same DTP
Activate and execute the PC.
Hope this helps!
Sheen -
Delete overlaping requests doesnt work with delta
Hello
I need to delete previous request delivered by delta DTP. Process type "Delete overlaping requests from cube" doesnt allow to select delta DTP.
Is it only for full load DTP?
AlexHi ,
Delete Overlapping request from cube works only for full loads.
Also if you have any such query regarding DTP functionality please reger this article
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36
-Vikram -
Delete overlapping request in DTP
Hi,
Is there an option to set "Delete overlapping request" in DTP?.Helllo,
There is no direct option in DTP to do so, but u can do it via process chain.
You need to have your DTP set to full update in order to make use of it in delete overlapping request process type.
Regards,
Shashank -
Deleting overlapping request from DSO
Hi there!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is a step, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.Hi Shanthi,
I tried using info package but still req havnt delete from info cube.
It works for DTP as i can see many DTPs in list but not mine thats the issue.
Thanks from your responce. Hoping for any new suggestion.
i cant manually delete req from production as process chain runs at mid night. -
Hello Experts
Please read my requirements.
I have an infocube with Full Load DTP. It gets the records directly from PSA. Its all in BI 7.X. My infopackage is on a datasource that is Delta Capable. Due to the design flaw, I get the records directly from PSA into InfoCube without DSO and hence the duplicate records.
What I did was, I initially ran, infopackage with "Initialize Delta with Data Transfer" and ran my DTP. All the records are in my InfoCube. So far so good. Later I created a process chain, in this Order.
Run Delta InfoPakcage
Run DTP (Full all the time) - This time it gets the full as well as delta records from PSA.
Delete Overlaping Requests
What I observerd was some of the records are still getting duplicated and some not after couple of days. Any ideas Why?
In "Delete Overlaping Request" process I selected the DTP while defining it and not the InfoPackage. How this process work with Delta InfoPackage. Please explain?
Thank you
BW User 999Hi,
You can avoid using Delete overlapping request,and load the data correctly to the cube via Full DTP.
Only if you dont need to previous days data in the PSA.
Every time when the process chain is executed
1) After the start process delete the PSA.
2) Load the data through the Infopackage.
3) Load it to the cube with the Full DTP.
In this way you wont need to delte the overlapping request. Hope this help...
Regards,
Mahesh. -
Delete Overlapping Request from InfoCube.
Hello,
I am using process Type "Delete Overlapping Request from infocube" in this I am selecting object type as a "DTP"
Under "Delete Selection" I am selecting following
1. Only Delete Requests from same DTP
2. Only Delete Full DTP request
3. Only Delete DTP Requests from Same Source
I am using "Full Load" in my DTP.
My requirements are like I need to delete old data and load new data every day in to a cube for that I am using this process type.
If anybody have better solution please let me know.
Thanks,Also
I am not deleting Index OR Not creating Indexs while using process type "Deleting overlapping request InfoCube"
what will be the impact on the cube?
How many index will have infocube?
If the cube having more than one index if i delete index, which index will be deleted?
Thanks, -
Delete overlapping request when month changes
Hi Experts,
Delete overlapping request works fine for all the days but when month changes it is not deleting the request as the filter value gets changed.
I have three Info Package and DTP like below:
Current Month -2
Current Month -1
Current Month
In January selection values are:
Current Month -2 201111
Current Month -1 201112
Current Month 201201
As the month changes, February selection values are:
Current Month -2 201112
Current Month -1 201201
Current Month 201202
We need the request which has selection criteria 201111 should stay, but 201112 and 201201 should get deleted as these two request are duplicated.
Please advice if we have any solution for this issue.
Suggestion will be appreciated.
Thanks,
Muiz AhmedYes Sven,
You are correct,
31-Jan-2012 Current Month -1 had loaded 201112
1-Feb-2012 Current Month -2 had loaded 201112
Now I have to delete request which has got loaded on 31-Jan-2012.
For now I have deleted manually, but I want automate this activity, so no manual intervention is required.
Thanks,
Muiz Ahmed
Edited by: MUIZ AHMED on Feb 1, 2012 7:40 PM -
Delete overlapping request in PC - Request from previous month got deleted
Hi Everyone,
We are using a 'Delete overlapping request' step in a process chain. Under the Deletion Selections, we have checked the following options:
1) Only Delete Requests from Same DTP
|_ Selections are - Overlapping
2) Request Date - Is in the Current Month
3) Exceptions:
|_ New Request will be loaded on - 1st Day of a Month
The datasource in this case is used for a Full update into a Cube everyday. We've used the above selections so that the request loaded on the last day of a month is not deleted by the subsequent load. We need this to retain a snapshot of the data for each month.
This month, when the process chain executed on 1st Feb, the request loaded on 31st Jan was not deleted. However, on 4th Feb, the Process chain deleted the request loaded on 3rd Feb and also the one from 31st Jan. There seems to be no reason at all for the 31st Jan request to get deleted. We've made sure of that by choosing the option 'Request Date - Is in the Current Month' in the Deletion Selections.
Is there any explanation why the request was deleted?
Thanks,
RamHi,
If you dont have any selections , it will delete the previous request. Based on the selections only overlap will work. For your scenario , it wont delete previous month request after changing it to current Fiscal period. Once check the selection options , is it displaying month wise or empty selections.
Regards
Pcrao. -
Deletion of data target contents Vs delete overlapping requests
hi,
when do we go for <b>delete overlapping requests</b>? if it is applicable for full load as well as delta load then i would like to first come up with the full load concept, we have the other option called <b>delete data target contents</b> with this we can delete daily full load without going for delete overlapping requests.
Pls let me know exact difference between DELETE OVERLAPPING REQUESTS FROM INFOCUBE with DELETE DATA TARGET CONTENTS.hi
When you have delta upload twice daily..the date in the previous request and the second request is same....so you might be giving this option to delete the overlap such that data is not loaded twice
Assign points dont forget
Regards
N Ganesh
Maybe you are looking for
-
How to find the xml elements in Indesign pages
i imported the xml file in vb.net. now i want to find the number of pages and no. of elements. i found out it. but i was not able to find which elements are placed in which page. i want that information. plz kindly help. i am using vb.net.<br />for e
-
HT204135 How can I set up a daily task to perform a nozzle check on my printer?
How can I set up a daily task to perform a nozzle check on my Epson printer from my MacPro?
-
Two iPhones with different applications
I have Vista and when I try to create another user to sync the iPhone#2, it says that it's only logged on as a temporary account and all information will be lost. So I've decided that I will just use my user account to sync both phones. I have found
-
Hi all, I doveloped the LSMW using recording method for transaction MM41. when i created the batch input session as many batch input folders(sessions) are creating as many as transactions(Records). Ex. three sessions are created for three reco
-
Cutting clips from a video.
I have a video that was taken which is roughly 45 minutes. I would like to cut this into clips. Unfortunately I haven't found how. I am sure its easy to do. But perhaps someone can lead me to the right direction?