Delta DTP cannot currently be deleted (see long text)
I deleted all the requests..actually there is no data in the write DSO and I have not loaded the cube...I want to delete the DTP and create a new one.
Delta DTP cannot currently be deleted (see long text)
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
That depends is your prod system open to create Infopackages & DTP if so you can do that..but this may require a change in the Process Chain as well to change the DTP if at all a process chain exists for the same.
Similar Messages
-
Order cannot be delivered (see long text)
I am creating a delivery wrt sales order through VL01N.
but I am facing the below error:-
Order cannot be delivered (see long text)
Message no. VL461
And in the Display log,its is showing as :-
Order is incomplete - maintain the order
Can anybody suggest me,where the problem,bcoz I am a mm guy and not aware very well releated to SD.In VA02 for reqd. sales order,in menu edit --> incompletion log or
press ctrl + f8 to find out incomplete entries,enter datas & save it. -
Runtime error while executing rule - see long text RSTRAN 301
Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text RSTRAN 301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'GBP' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
MaruthiGuess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation
-
Query regarding COPY OF FBL5N : No items selected (see long text)
Dear All,
Currently i am executing FBL5N report and it is ok.
Now i have copied FBL5N program to ZFBL5N.
Now the issue is when i am trying to execute ZFBL5N, this messge comes and report not generated in some cases.
"No items selected (see long text) ".
This error has not come for all cases but just for few cases and i have tried to found out the case,
and i found that, whenever we maintain vendor in control data tab of XD02(Change Customer : general data) then only above message has come.
Now i am not getting one thning, Why FBL5N not giving above error because i have copied the program and nothing difference in both code then why ZFBL5N giving error and FBL5N generate report and what should i do for above error.
Please help regarding this matter
Regards,
Shivam.Dear Nabheet,
I have debugg, code is same for both cases becuase i have just copied now.
Although, i have debugg also and i have seen in coding, when program goes in perform form "read_vendor_items" and in that perform, there is written function, call function 'LDB_PROCESS'
. Now when i going during debugg time,
call function 'LDB_PROCESS'
exporting
ldbname = 'KDF'
expressions = it_dyn_texpr[]
tables
callback = it_callback
selections = it_selscreen
exceptions
ldb_selections_error = 1
ldb_selections_not_accepted = 2
free_selections_error = 3
callback_no_event = 4
callback_no_program = 5
callback_no_cbform = 6
others = 7.
After pass this function moduel in case of ZFBL5N, it_pos table is not filled but in case of FBL5N, it_pos table is filled one record and that record also shown.
But code is same but different only program name.
Now what can you suggest.
Regards,
Shivam. -
Hi,
I'm getting this error on different DTPs frequently
( Error: program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text), SQL Error: INVALID_CURSOR )
What would be the reason for this. Please clarify anybody.Hi,
This is error code BRAIN299 & it is often seen along with this error:
SQL Error: INVALID_CURSOR
Message no. DBMAN257
In addition to the note recommended by Des, please also refer to Notes 1491745 & 460652 which have resolved similar issues in the past.
Rgds,
Colum -
Database selection was interrupted (see long text) Error
Hi
Please let me know the process to resolve this error on DTP in BI, when i repeat this DTP it is failing again. and the most of the transferred records are added to the target DSO.
Error: Database selection was interrupted (see long text)Hi:
Please check if any of the SAP Notes below helps you in solving this issue.
Note 1285640 - 70SP21: "Database selection was interrupted"
Note 1518750 - Additional trace messages in the DTP request log
Note 1519889 - DTP processing: "Database selection was interrupted"
Regards,
Francisco Milán. -
Can not see long text description of a characteristics in portal
Hi experts,
I designed two queries via Query designer and published them to portal but I can not see the the long text description of "Name" attribute belongs to 0BPARTNER characteristics.
One of the queries shows only the last name of partner in portal while it is showing full name and last name in Bex Analyzer. The other query shows only the key value in both portal and Bex Analyzer.
I want to see long text description in both queries.
For an additional information, I'm extracting data from CRM 5.00 to BW 7.00
What will be the reason for this and how can I solve it?
Can anyone help me for this issue, it's a kind of emergency situation.Hi,
we have the same problem.
We want to change <b>only</b> in the screen variable the hierarchy text (from default to long\medium text) but even if there's a possibility to do this, really it doesn't happen anything - it' s possible when you start query, in the selection screen inside every the variable there's a command "User Settings" in which manage what you want to see (I put display custom, as text, medium text).
I try to do this also in query analizer, selecting variable (hierarchy) and enter in this (user setting), changing in display custom as text - medium text, but even if I save this settings, really doesn't happen anything.
It seems the system isn't sensitive to this selection...
By now, if someone has an answer, please write us!
Thanks in advance,
Alessandra Mirone -
Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
KajalHi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal -
Loaded data is not yet visible in Reporting (see long text) Message no. RSM
Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
NaveenHi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen -
Loaded data is not yet visible in Reporting (see long text)
hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson) -
Error occurred in derivation rule. See long text ; Message no. K/110
I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
Message no. K/110
CO-PA Characteristic Derivation
Diagnosis
Step 0166 5400: Profit Center in Inventory Posting
No derivation rule entry was found for the specified source values valid
on 02.04.2014.
The derivation rule was defined so that an error message is displayed
when this occurs.
The system could not find a rule entry valid on 02.04.2014 for the
following source fields:
Product Group
Procedure
Create a rule entry for these source values and make sure that rule
entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you
can also change the derivation rule so that no error message is
displayed if a rule entry is missing.
Maintain entries
Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
DataSource has to be replicated (time stamp, see long text)
Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
NityaSeems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj -
Error occurred in derivation rule. See long text, Message no. ABADR100,
Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please helpHi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani. -
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
KumarThanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks
Maybe you are looking for
-
CUCM 8.6.2 to 9.1.2 Upgrade fails
I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error; HWModel=7835I3 CPUCount=1 CPUType=
-
PSD files always imported as one layer QuickTime
Does anyone know how to work around the bug in DVD SP 4.2.1 that formats every imported PSD file to Quick Time format destroying the layer structure? No matter if the file has layers or not, no matter if the file is saved in PSD, TIF, JEPG, etc the f
-
All three of the major Lisp vendors with offerings for OS X on PPC have been ominously silent about plans for intel Macs. Has anyone heard anything recently? I hate the thought of having to eventually move to Windows or a stone-knives-and-bear-skins
-
I cannot get this imac to save selected newtwork preference (tried apply and locking the selection to no avail). My other imac maintains the selection without a problem using the same airport. The connection works immediately after re-selecting the
-
Hi, I have created a website using iWeb '09. It is complete and I need to upload it for my friends to have a look at it. I have signed up an account on www.drivehq.com. They have given me an ftp address, ftp.drivehq.com. I also have a username, passw