Delta enabling for Customised fields

Hi All,
We have customixed info object - 'Subscriber'(ZSUBSCRIB) for 2lis_11_vahdr data source. This field (ZZKZ4 - partner for the contract) is manual input for a Contract in VA42 Tcode. The delta load in BW does not capture changed values for this field. The changed record for this is getting transferred to BIW from ECC by repair full update only. The mentioned field is updated by direct assignment from ECC.
Also I have checked in the RSA2 Tcode in ECC system; for the data source 2LIS_11_VAHDR; the check box is ticked for this field (ZZKZ4) in the column Not transferred to Extractor. Is this affecting the changed records for this field to be transffered by delta.
Request you to let us know if the delta capability can be utilized to update this record in BIW system.
Kind regards,
Biswajeet

please remove this tick for this field (it causes field's value not to be forwarded to extractor)
In which table you have added new field ? if this is in any table which extractor refers (like vbrp) delta will work for change in that field

Similar Messages

Delta Enabling for Enhanced field

I have enhancement on standard datasource (Datasource is from Customer Service Appl and enhanced field is from PMCO table and its linked through OBJNR and OBJNR is Primary key in PMCO table and standard field in datasource). My question when users make any change to this field in PMCO table, this particular record is not being picked by delta. How should i make this field delta capable. Since OBJNR is generated is everytime a new order is created, and when they change at PMCO Table since there is no change in OBJNR no delta is picked up.
I have another option is to ask user to do pseudo change on order when they make changes on PMCO table. Is there any other option for this so system can dynamically consider this change.
Your answers are highly appreciated and rewarded.
Regards
Kunal

Hi Kunal,
   I dont think you will get delta for your enhaced field until main record is chaged.
   We can not ask to chage the record for Delta.
   Try this:
   Create one more ODS and load data(in Overwrite) using generic extraction from table PMCO(If you have change data and creation data, you can selectively pull).
   While loading data from your main extractor, assign values for PMCO field in BW update rules from this ODS.
Hope it Helps
Srini

Delta enabling for Custom fields after Master Data Enhancement

Dear Friends,
Two new custom fields were added to MARA table in ECC. I enhanced the extractor 0MATERIAL_ATTR by adding an append structure and added these new fields. For enabling DELTA, I did the following:
1. In table ROOSGEN lookup the 'Message Type' for extractor 0MATERIAL_ATTR. Found 'RS0152' as message type.
2. Used transaction BD52 to create and entry in table 'TBD62' for Message Type - 'RS0152', Change object- 'MATERIAL' and fields - ZFIELD1 and ZFIELD2.
3. Did a SCC1 in the test system for the transport carrying the above changes and did a re-init in BW. Then did a DELTA.
I am seeing 0 records for DELTA eventhough I made some changes to the ZFIELDS in ECC.
Please share your thoughts and suggestions if I am missing anything.
Thanks,
Raj

Hi Raj,
Check the following
1) If you transport the changes, the message type name changes across the system
2) The Data Element of the Z fields, check whether you have set the 'Change Documents' option in the 'DEFINITION' tab(Below th Parameter ID).
Regards,
BINetweaver2004s

Problem in delta management for custom fields added in standard Table

Hi developers,
we have a problem, when a sales order is modified in a field custom, added in tables (VBAP-VBAK), the delta BW doesn't recognize the modifications. The data type of these fields haven't the flag (Change document) setted in
view Definition.
If this flag is setted, Can the delta BW recognize the modifications of the custom fields?
Best regards
Domenico

You cannot get delta by just appending fields to extract structure & writing the user exit coding as this user exit code is run by the extractor after the X- and Y- tables are compared to create the before & after images.
You have to do this procedure by enhancing LIS comm structures like MCVBAP (for example).
Please refer to OSS note 576886 for complete details.
Kumar Gudiseva.

Delta issue for Customized field in LO Datasource.

Hello,
I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
BR / PT..

I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Please try activating the datasopurce again and try it.
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
he customer exit is hit before the entries are populated in extraction queue. Actually, when the transaction is done, the changes are written to database table and at the same time into the extraction queue. Just before going to extraction queue, the custom fields get populated in customer exit.

Delta problem for enhanced field in master datasource

Dear Experts,
I have a master datasource 0customer_attr. I have enhanced it with field sales group. Daily delta comes for this datasource.
But when user changed sales group for a customer from s1 to s2 then it is not coming in delta.
Still there is old sales group exist in BI for particular customer. In short , delta is not coming for enhanced field.
Please advise what should i do ?
Regards
Shweta

The problem is that no delta is posted to the message type for KNA1 in the bdpcv/s tables because the orignatting field is a KNVV field
So if KNVV was changed ie sales group it will not post a ale change pointer for KNA1 therefore the delta for KNA1 will not pick up any change
However if there was a change to KNA1 on the same day as the KNVV changwe then the delta will pick up the change
The way to get around this is to either use a KNVV delta datasource into BW and then enhance 0Customer that way via transformations into the customer infoobject in BW only
Or to put a user exit into the KNVV change on R3 to generate an ale change pointer for KNA1(ie every change in KNVV will generate a change in the KNA1 extractor)

Extension of LIS extractor - possible to delta enable field from Z-table?

Hi Experts
We have to get data from a date field in a custom Z-table (delivery related) in R/3 to BW.
We would like to get the date by extending a delivery LIS extractor with a new field and make some ABAP to lookup the correct value in the custom Z-table.
A requirement is though that if the date in Z-table is changed then we need to get the update value to BW. Therefore, we need to delta enable the new field in the append structure - but that ain't possible is it?
Alternatively will we have to make a new DataSource based on the custom Z-table and somekind of full load (with a fake delta).
Thanks.
Kind regards,
Torben

Torben,
If your custom Z-table does not contain too much data and doesn't change too often it might be an option to turn on DB logging (Technical settings -> Log data changes). Do not do this for large tables containing transactional data as the logs will consume a lot of diskspace!
Each insert/mod/deletion will be logged and in in a user-exit you can use FM DBLOG_READ_WITH_STATISTIC to check if something has changed and then append the corresponding data to your data package.
Grtx!
Marco

Populate data into customise field in the line item of FB60

Hi,
Does anyone know which BAdI/User Exit/ Implementation that i can use for populating data into the customize field in the line item of FB60?
Thanks in advance.

Hi,
I have found the module to implement. But i met with one problem which is I edit the data for customise field, and modify the table xbseg. I don't know why until the point which it is needed to cast it to the screen, the data that i derived for my customise field is being deleted. Any idea why is it so?

Data not populated for Enhanced field

Hello,
I had done enhancement by adding field to the LO Datasource.
Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
What is the reason that i am not able to see the data for the enhanced field in RSA7?
Thanks in Advance!
Regards
M.A

Hi M.A,
This means that there is no delta data for that field.
If there is no change in the data for that field then you cannot see any data in RSA7.
Check in the Delta repetition in the RSA7 for any data for that field.
Regards,
ravi Kanth

Change delta enabled Infospoke Selection.

Hi,
We have a requirement to add one more selection to an infoobject available in Infospoke.
One Infospoke is delta enabled for transaction data & another one is Full for master data.
I can add that selection to both infospokes but need to know what things to take into consideration.
For the transaction data infospoke that is delta enabled, what are the implications of changing the selections?
For historic data, how can we provide this new selection values?
Any thoughts?

its BW 3.5 thanks. Also what would be the implications to do the same for a full Master data infospoke.
Thanks,

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

How to make enhanced fields of data source delta enabled?

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
So running full load every week is taking more time.
Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
Any help will be greatly appriciated !
Thanks & Regards,
Vishnu

HI,
It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
Then, you can mix both datasources in a DSO in BW.
You can look for a " how to create generic datasources which use delta queue"
I hope it helps

How to Make the fields Delta enabled or Change pointer enabled in R/3

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled i.e. when these fields change in R3 it does not write to Change Pointers ( and hence no delta ). For this reason every week we have to do a full load which takes very long.
Can any one suggest how to make this fileds delta enabled or how to know weather these fields are writing the Change pointers or not in R/3 when they change?
Regards,
Vishnu

Hi Vishnu,
In your case you need to build the logic for your custom fields as you have enhanced the Business Content DS..
The way you can build the logic would be using the CDHDR and CDPOS tables if the changes are recorded in those tables.
The above tables contain any changes done to any documents..
Let me know if it helps..
Best Regards
Avinash

Delta load for a data source not enabled

Dear Experts,
We have got the requirement to create reports on shipment details.
Based on the requirement we have identified the
Infosouce/ Data source : 0OI_TD_OIGSII
Info Cube: 0OI_TDC01. we think this cube will satisfy the requiremnt.
But the problem is the data source is not delta enabled. so how do we extract the data and how to capture the delta.
when we checked in Roosource table the delta field is blank (Delta only with Full Upload (ODS or InfoPackage Selection))
These data sources are IS OIL specific, so dont know the data extraction procedure.
Please through some light and help me.
Please advise.
Regards
venu

Delete duplicate request is a process chain variant, which will allow you to set the duplicate request deletion options. You need to explore those options.
Now say you have a routine in the DTPs.
DTP1 = Current Month
DTP2 = Prevoius Month
In the month of July,
DTP1 = 07/2009
DTP2 = 06/2009
On daily basis DTP1 will load data for July and DTP2 will load data for June. Now delete duplicate request will delete the previous requests loaded by each of them for the same month. Meaning delete duplicate request for DTP1, will delete the request loaded for 07/2009 and DTP2 will delete the duplicate request for 06/2009.
Now when you will be in Aug, the routine will change the selection criteria
DTP1 = 08/2009
DTP2 = 07/2009, so now DTP2 will delete teh duplicate request for 07/2009 and load the new data. Now the data changed for 06/2009 is not possible to load as you have only 2 DTPs.
For safer side, you can create 3 DTPs to take care of the last 3 months, but first test the logic for two DTPs and then go further for the third DTP.
- Danny

Delta records are not populating for enhanced fields in 2LIS_17_I3HDR

Hello,
       I have an issue with 2LIS_17_I3HDR datasource, i have enhanced the DS with Zfields, these are populated from AUFK through user exit. When i fill setup table, i can see the values being populated for enhanced fields, but for delta records, i dont find any values for these enhanced fields, even though the values exists in the AUFK table and i even tried degugging the user exit code, it doesnt go through it during the posting of delta records.
Can some one give some suggestion on this issue.
Thanks,
          Pavan

Hello Ravi,
                 Yes, delta records cannot be populated by enhanced fields. Here the issue is different,
i have added a closed date to the extract structure, this is order specific, so when i create a new PM order after the full load, and release the order and close it, the AUFK table get an entry for closed date, my exit compare the object number of the extractor to object number in AUFK and get the closed date value to the DS, this is not same as enabling delta on the enhanced fields (which cant be done).
Thanks,
            Pavan

Delta enabling for Customised fields

Similar Messages

Maybe you are looking for