Delta extraction is not possible at the moment

Hello,
I am trying to run a delta load and am getting the message "Delta extraction is not possible at the moment". This is actually a repeat because i have tried this load multiple times with no success.
The Diagnosis in the error message is:
The delta extraction is not possible at the moment because the status list of the request is locked in the Cube. This can be for a number of reasons:
1. Another extraction is taking place in the target BI.
2. The control parameters of the request in the InfoCube are locked by deletion or compressing processes.
I dont see that any other extraction or a deletion or compression job. I've tried going through each failed job in the monitor and red lighting them but that hasnt helped. Any ideas what to check or how to fix the problem?
Regards,
TMS

Hi,
From what you are describing, there is already some process going on on the infoprovider you are trying to load the data to. Check if a data load is still active/activation is happening, if its a cube then are there aggregates and are they rolling up. You can check the process in SM66 or SM50 and the jobs in SM37.
The process has locked the infoprovider and no delta or for that matter any process can be done until the earlier one finishes. You can take help from the BASIS team to find out what is locking your infoprovider.
Cheers,
Kedar

Similar Messages

Container MigrationContainer is not active at the moment

Hi All,
Below mentioned error encountered while deploying SAP-CRMDIC component using the file SAPCRMDIC17_0-10002941.SCA. It ended up in "ERROR" status in JSPM.
Problem might be due to the "inactive container". Could you please let me know a easiest method to deploy the SAP-CRMDIC component.
predecessor system -
                     com.sap.engine.services.deploy.exceptions.ServerDeploymentE
xception: Container MigrationContainer is not active at the moment and it is not
possible to update sap.com/crmmigrxcm.
                        at com.sap.engine.services.deploy.server.application.Upd
ateTransaction.getConcernedContainers(UpdateTransaction.java:485)
                        at com.sap.engine.services.deploy.server.application.Dep
loyUtilTransaction.commonBegin(DeployUtilTransaction.java:265)
                        at com.sap.engine.services.deploy.server.application.Upd
ateTransaction.begin(UpdateTransaction.java:166)
                        at com.sap.engine.services.deploy.server.application.App
licationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                        at com.sap.engine.services.deploy.server.application.App
licationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                        at com.sap.engine.services.deploy.server.DeployServiceIm
pl.makeGlobalTransaction(DeployServiceImpl.java:3190)
                        at com.sap.engine.services.deploy.server.DeployServiceIm
pl.update(DeployServiceImpl.java:671)
                        at com.sap.engine.services.deploy.server.DeployServiceIm
plp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                        at com.sap.engine.services.rmi_p4.DispatchImpl._runInter
nal(DispatchImpl.java:330)
                        at com.sap.engine.services.rmi_p4.DispatchImpl._run(Disp
atchImpl.java:201)
                        at com.sap.engine.services.rmi_p4.server.P4SessionProces
sor.request(P4SessionProcessor.java:137)
                        at com.sap.engine.core.service630.context.cluster.sessio
n.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.ja
va:33)
                        at com.sap.engine.core.cluster.impl6.session.MessageRunn
er.run(MessageRunner.java:41)
                        at com.sap.engine.core.thread.impl3.ActionObject.run(Act
ionObject.java:37)
                        at java.security.AccessController.doPrivileged(AccessCon
troller.java:207)
                        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:104)
                        at com.sap.engine.core.thread.impl3.SingleThread.run(Sin
gleThread.java:176)
                     For detailed information see the log file of the Deploy Ser
vice.
11/02/12 19:54:04 - ***********************************************************
Feb 12, 2011 7:54:04 PM Info: End of log messages of the target system.
Feb 12, 2011 7:54:04 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE App
lication) *****
Feb 12, 2011 7:54:04 PM Error: Aborted: development component 'crm/migr/xcm'/'s
ap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2', grouped by :
Caught exception during application deployment from SAP J2EE Engine's deploy ser
vice:
java.rmi.RemoteException: Cannot deploy application sap.com/crmmigrxcm..
Reason: Container MigrationContainer is not active at the moment and it is not p
ossible to update sap.com/crmmigrxcm.; nested exception is:
        com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Con
tainer MigrationContainer is not active at the moment and it is not possible to
update sap.com/crmmigrxcm.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
oyerImpl.performAction(DeploymentActionTypes).REMEXC)
Feb 12, 2011 7:54:04 PM Info: Starting to save the repository
Feb 12, 2011 7:54:05 PM Info: Finished saving the repository
Feb 12, 2011 7:54:05 PM Info: Starting: Update: Selected software component 'SA
P-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2' update
s currently deployed software component 'SAP-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'
/'1000.5.0.14.0.20090211084319''/'1'.
Feb 12, 2011 7:54:05 PM Error: Aborted: software component 'SAP-CRMDIC'/'sap.co
m'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2':
Failed deployment of SDAs:
development component 'crm/migr/xcm'/'sap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2' :
aborted
Please, look at error logs above for more information!
Feb 12, 2011 7:54:05 PM Info: Starting to save the repository
Feb 12, 2011 7:54:05 PM Info: Finished saving the repository
Feb 12, 2011 7:54:05 PM Info: J2EE Engine is in same state (online/offline) as
it has been before this deployment process.
Feb 12, 2011 7:54:05 Error: -
At least one of the Deployments
failed -
Thanks.

Hi,
You would need to start the services MigrationService and MigrationContainer using following commands.
- connect via telnet to the system: telnet <hostname> 5<instance number>04
- authenticate with administrator username/password
- jump <server_id>         Server ID can be obtained from the Visual Administrator/or from System Information Page.
- startservice MigrationService
- startservice MigrationContainer
Then retry the deployment.
Regards,
Srikishan

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

HT202297 I just bought an ipad3 and I was wondering if anyone knows how to have my reminders displayed in my calendar? If it not possible on the iPad , is it possible on the iphone4s? if not, than does anyone know of any apps that make it convenient to do

I just bought an ipad3 and I was wondering if anyone knows how to have my reminders displayed in my calendar? If it not possible on the iPad , is it possible on the iphone4s? if not, than does anyone know of any apps that make it convenient to do so?

That's only for the iPhone 5. On the 4 and 4S, they can repair the back glass in store for $30. They will not replace the display on a 4 or 4S. They must replace the entire phone. Replacing the display on them requires disassembling the entire phone, which they will not do in store.

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

Subject:-Tax reduction in invoice is not possible at the time of LIV when c

Dear SAP expert
Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
Is there any solution available?
s ap

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

Use of dynpro services is not possible in the current system status

Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

Is it possible that the moment you make your iphone 4s from Japan an openline here in the Philipines changes in Part No., Serial No., IMEI, and gigabyte capacity will change?

is it possible that the moment you make your iphone 4s from Japan an openline here in the Philipines changes in Part No., Serial No., IMEI, and gigabyte capacity will change?

Crackbot wrote:
I awoke after missing several (6-7) phone calls from a single number to find a reminder to call someone back and I didn't create the reminder. And no one else had physical access to my phone. I really hope this isn't anything weird because it seems weird to me.
It's very easy to accidentally create a reminder to call someone back. When someone calls you, there is a small button over the red "Decline" button labeled "Remind Me". If you tap, the call will be declined and a reminder to call back will be created. Easy enough to do if you're groggy and fumbling for the to make it shut up. If you weren't paying attention or were unaware of the feature, it might seem as if you had simply declined the call.

Problems Shared Services:Registered application is not active at the moment

Hi!
I have a problem with Hyperion Shared Services (HSS) and Hyperion Performance Socrecard (HPS), my projecto from HPS appears like if not it was registered in HSS.
The error is: Registered application is not active at the moment. Please consult your system administrator.
The information was migrated from other server, now already run configuration utility and configurate my proyect, but not appears in HSS.
Optional: This is necessary for assign sercurity roles by Domain?
Thank you very much.

Did you get this resolved .
Vinod

Registered application is not active at the moment.

Two symtoms
This happens with the Native Admin or any MSAD Shared Services admin.
When in Shared Services - Right Click on Hyperion System 9 BI+ - the option to Assign Preference is not available
Also when selecting the same project the following message -
Registered application is not active at the moment. Please consult your system administrator.
This is not of a case of it breaking. This was the symptom since the original installation.
System 9.3.1 -
Note - Regestering BI with Shared Services does an interesting thing - The menu appears to Assign Preference - but a page cannot be displayed also appears.
When recycling services the menu option disappears again.
Any thoughts?

Hi,
I have exactly the same error with a different external directory wich is Open LDAP.
Did you get any answers or tips around this error ?
Thanks,
Gaël.

Registered application is not active at the moment. Please consult your sys

Registered application is not active at the moment. Please consult your system administrator. This is what I often (and now) see when opening the default created application "Hyperion System 9 BI+:#####.intranet.######.nl:6800::1 BI+ 9.3.1 " under default created project "Hyperion System 9 BI+" in Shared Services. Even after restaring all the relevant services in the right sequence with the right delay I still got the message. Anyone an idea?

Hi,
I'm also interested in the answer, if you got it.
Thanks,

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Delta extraction is not possible at the moment

Similar Messages

Maybe you are looking for