Delta Failed in Process Chain

Hi BW Experts,
Our MM process Chain (Transaction Data)is running daily at 11:55PM in the night time.
But today it is still running. I know this process chain will be failed . If we do not solve the issue today, delta package will not run tomorrow. Is it correct?
Please give me the solution.
Thanks & Regards,
Anjali

Hi,
• This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
Whenever we are loading the Master Data for the first time, it creates SID’s. If system is unable to create SID’s for the records in the Data packet, we can get this error message.
If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
It is a system error which can be seen under the “Status” tab in the Job Over View.
Pls assaign the points if possible.
Regards,
Raghavendra Rao.Kolli

Similar Messages

  • Code to fail a Process Chain

    Hello everybody,
    I am using a ABAP Program in a Process Chain ( Chain of Processes that load data to the BW Cube). I do some check in the Program. If the check is OK, then I will continue with the Process Chain. If the Check Fails, then I should fail the Process Chain.
    How do I accomplish this? If you can give me Piece of code, that will be very helpful.
    Thanks in advance.
    Shameem

    Hi Shameem,
    Plss Set the value of the sy-subrc to a non zero value so that the ABAP program step in Process Chain turns RED and Hence the Process Chain will stop.
    Shreya

  • Delta and Full process chain for same master data target.

    Hi  Friends,
    Can I do full update and delta update through process chain for same master data target and from same source ?
    Regards
    shekar reddy

    Hi Sriram,
    why you want to load full and delta for same master data object?
    you can achieve this but make sure that you select repair full option for full load IP.
    you have this option in scheduler in menu bar
    Regards,
    Venkatesh

  • Info Package failing in Process chain

    Hi,
       One delta load InfoPackage fail every time in process chain with error message "Last Delta upload not yet completed".
    Actually this infopackage load data in cube but in procuress chain log, it turn red and in the display message window, under tab "Chain" the request id is not the one which loaded data but different one.
    This issue is delaying the upgrade and URGENT in nature.
    PLEASE HELP....
    Regards,
    Anil

    Hi Anil
    You are trying to complete a delta load while the previous one is not finished. Please check the monitor for the previous load. You can use the manage tab to set a load to completed, or you can delete the load.
    If its hung (yellow) or in red goto the QM status in monitor and mark the QM status red. Then goto the data target and delete red request.
    Go back to the delta infopackage and schedule the job again. this time it'll prompt you for a repeat delta. Click OK and the delta load will start again. This'll bring the data for the old failed delta as well as any changes or new records as well.
    Hope this Helps
    Anand Raj

  • All  8 ODS   loads  are failing in Process chains

    Hi Experts,
    Today in Production ,all  8Z<ODS>  ( eg. 8ZSD_O51, 8ZSDC_53,8ZCOPABC02.......) giving same error in Extraction .
    It is "Error occured in data selection" in Extraction tab in details tab in RSMO.
    We are correcting these loads by deleting this red requests from data target and running the Infopackage manually for repeat of last delta.when we run infopackage manually it doesn't fail.but it give above error while loading in Process Chain.
    So in our Batch we have around 30-40 loads of this type( 8Z load).So to run each info package manually it is time consuming process??
    So pls give suggestions to correct this error.....
    How can we fix this problem........
    the error is coming only after some support pack installed in BW two day before.
    Thanx in advance...

    Hi,
    are you In DEV or Prod? If in prod, did you have this behavior in your DEV sys as well after applying your SP?!?
    try replicating your "myBW" datasources and reactivating your transfer structures;
    Try first with one of it; test and see if this works; then run RS_TRANSTRU_ACTIVATE_ALL to activate all your transfer structures.
    hope this helps...
    Olivier.

  • Delta loading and Process chain BI

    Hi experts,
    Two Issues.
    1)As i am loading FI data into dso through a process chain which includes Start process>Delta infopackage(which gets data upto psa)>Delta dtp-->Datastore activation.
    But infopackage is picking up deltas but DTP is picking up all the previous records plus deltas.
    100 records  -- 1st day throught Intialization of Delta with Data Transfer
    2 delta records  --   2nd day
    But DTP is picking up 102 Records on the 2nd Day, which means it is also  picking the old records as well.
    The DSO must have just 102 records but it is having 202 records.
    2) A process chain in running daily as scheduled , but I rescheduled with new scheduling options without deactivating the Process chain.
    My Question is
    Will the Process chain run for the OLD and the New Schedule or
    Is it going to run for new schedule or old one?
    or
    will I face any Problem because I did not deactivate and made changes to the Change.
    Please help me in this matter.
    Thanks in advance.
    Bhadri.

    First query:
    I believe that u have used FUll update type DTP is instead of the Delta DTP.. Please cross check the Update mode of the DTP once.
    To resolve this issue, delete the total content of the DSO as u have Init and delta loads in PSA. And then using the Delta DTP of the Process chain, load the data. It will extract the total cotent what ever is there in PSA, and later the same DTP will act as the Delta type  and will pick the data from the New request of the PSA.
    Second Query:
    Its always suggested to deschedule the process chain before changing the schedule timings. When ever u do this type of scheduling, just check how many number of JObs available in Schedule mode, if u can see more than one, then delete the older one and keep the new one as it is.
    But I always suggest you to deschedule the process chain and reschedule  PC with the new timings and then activate the same.
    Thanks
    Assign points if this helps

  • Loadihng from ODS to Cube failed in process chain

    Hi All,
    I have a process chain for SD loads scheduled every night. It gave me an error while loading data from Billing ODS to Billing Cube(via Further Processing, and the data is not available in PSA).
    The error it gave is as follows:
    Error while updating data from DataStore object ZSD_O03
    Error 7 when sending an IDoc
    Time limit exceeded. 3
    Time limit exceeded.     
    Errors in source system
    Now the request is loaded in Cube(YELLOW status) with transfered records 87125 and added 62245. But there is no way by which we can check if the complete data has come to the cube.
    i did not delete the previous request from the cube  and tried to repeat the process chain from the same point...it then gave me the following error:
    -Last delta incorrect. A repeat must be requested. This is not possible.
    Please tell me now what should I do...i don't have to miss the delta records in the cube.
    1)Should I delete the prevous loaded request in cube and repeat the process chain from the same point...will it get all the delta records in that case???
    2)Should I delete the request from cube and manually repeat the last delta for the cube. and then manually load the remaining process chain.
    please help me out soon..
    Thanks and Regards,

    Hello Niyati
    you can use 2nd option
    Your error message is comming because of lack of BGD process and memory....just set the status of request in cube to red, delete it, and run a repeat load from infopackage.....
    If no. of records are high than just go for the option of "load data in PSA and than subsequently in data target"
    in infopackage
    Thanks
    Tripple k

  • ABAP program fails  in process chain -'ABAP/4 processor: DBIF_NTAB_SQL_ER

    Hi Experts,
    I have an ABAP program in  process chain. It frequently fails in the chain .
    When i do repeat on it will run fine.
    Purpose of the program is to delete the content from open hub table.
    I can    'ABAP/4 processor: DBIF_NTAB_SQL_ERROR' .
    What could be the reason . How can i give permenant fix to it.
    Thanks in Advance

    Hi,
    It looks like database error, speak to your DBA/Basis to get it resolved.
    regards
    Vikash

  • How to set delta load in process chain

    hello all
    The scenario is i created process chain for transaction data and all the infopackages are in initial load now I want to do delta,how to set delta in process chain,bcoz only the new records should load?
    kindly anyone let me know.
    regards
    balaji

    Hi Balaji,
    In most projects thay dont have the "init" infopackages in the process chain. They have 2 infopackages for a load - One for init and the other for delta. Now that you have created the process chain what I suggested was to change the infopackage settings to delta load and change the description of the infopackage.
    The other option would be to create a new infopackages for delta and include them in the chain replacing the "init" ones.
    Bye
    Dinesh

  • Create Index fail in process chain

    Hi Friends,
    I have a process chain in production system which loads inventory data everyday at 6:00Am.
    2 days back R3 production system failed and the data is not loaded into BI.  It was stopped at Delete Index step. I have started again by selecting Repeat then it worked and the infopackage is also executed successfully.
    After that it is failed at Create index step and giving message " Job cancelled after system exception ERROR_MESSAGE". Till then it is giving same problem everyday.
    Could you guys help me how to solve this and execute the chain successfully.
    Thanks & Regards

    Hi,
    Try to create index for the cube manually i.e got info cube , Right Click -> manage->performance-> perform check index - if red do repair index, if it will not help then create index. After that run it though process chain
    Hope it will resolve your problem.
    Sangita

  • PSA Deletion Process failed in Process Chain

    Hi..I have a bizzarre issue...
    I have created one process step in Process chain for deletion of PSA data of a particulur data source(o days).Every setting is fine.
    Except for it fails and gives message:
    Data inconsistency; Partition /BIC/B0001723000 not deleted
    Then I do the repeat in Process Chain and it completes successfully.
    Can anybody throw some light??

    Hi,
    Go to se14 and adjust it - /BIC/B0001723000
    thats it,
    Best regards,
    dushyant.

  • DB statistics failed in Process Chains

    Hi BI Experts,
    We are maintaining 6 process chains in our system.
    Today every job was running successfully.
    But in every process chains, the DB STATISTICS are failed.When I check in the performance tab , it shows green.
    So i could not solve this problem.
    The log message is:
        The exception 'CX_SDB_ORA_PROGRAM_ERROR' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_SDB_ORA_UPDATE_STATS=======CP' has to be
        terminated.
    Please can anyone tell me the process.
    Thanks in advance.
    Regards
    Anjali

    Hi Anjali,
    Check the OSS Note 998904 - Statistics check shows red or yellow traffic lights.
    I am pasting the contents of the Note here:
    Symptom
    After an update statistics run, the check (in transaction RSRV or transaction RSA1--> Manage) continues to show yellow or red traffic lights.
    Other terms
    RSDU_ANALYZE, analyze, statistics, yellow traffic light, red traffic light, performance, RSRV, incorrect statistics, manage
    Reason and Prerequisites
    This problem is caused by a program error.
    Solution
    The check for current statistics on InfoCubes contains a static time query and as a result of this, statistics are incorrectly displayed as 'not current'. This is just a display problem.  After an update statistics run, the statistics are actually up to date.
    SAP NetWeaver 2004s BI
               Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
    In urgent cases, you can implement the correction instructions.
    You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
    To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
    Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. It contains notes regarding the SAP Note Assistant. These notes prevent problems during the implementation.
    Bye
    Dinesh

  • Init and delta uploads using process chain

    Hi,
        I have a scenario where for the first upload i use init upload for that i have an infopackage now for the subsequent uploads i.e delta upload i get the option for the same only once i have run the init upload.
           so the doubt is can i use a process chain defined to carry out the whole task?????
    Regards

    Hi Virat,
    AS init is a one time activity, so what you can do is.
    1> set the init in infopack and run the process chain.
    2> remove the infopack and then include a new infopack with delta option or change the existing infopack to delta option.
    3> schedule the infopack.
    whatever you are expecting is not possible.
    Hope I answered your question.
    THanks and Regards,
    Suneel

  • Rollup process failing in process chain

    Hi All,
    Daily the rollup processin in our process chain failing due to  the fallowing error
    "ORA-01400: cannot insert NULL into
    ("SAPBIW"."/BIC/E100093"."KEY_100093U") "
    But once we repeat the rollup process in the process chain it is getting successfull.
    Can you suggest solution for this error.
    Thanks
    Suneel

    Hi Suneel,
    As correctly mentioned by other to check logs and PSA data, you shour also check notes available on this error.
    Probabaly some data in a field is causing this error, so need to analyize the values which are coming.
    There are few notes on this:
    ORA-1406 error/ ORA-1400 Cannot insert NULL
    SAP Note Number: 211617
    Hope it helps...
    Regards,
    Ashish

  • BP daily load failed in process chain

    Hi,
    I am using process chains for daily loading of master data. I have an infopackage scheduled in that process chain named 0BP_DEF_ADDRESS_ATTR_INIT/DELTA_CRM01   (ZPAK_48WV8918R85SEUHG8N1IP6DJQ) . This infopackage is showing an error. When i diagnosed it says "Second attempt to write record '0030368557' to /BI0/PBPARTNER was successful"
    And during error analysis i found this is causing the error.
    Has anybody come across this error? How to correct this?
    Appreciate your valuable responses.
    Thanks
    Ashok

    Thanks.
    I deleted the request on Requests tab. However the request still runs on the reconstruction tab and when i manually try to do a delta load it says the last load is not finished yet.
    Could you please suggest?
    Thanks

Maybe you are looking for