Delta generation problem in LIS

Hi All
I have got the following error message when i tried to generate delta updating for the Customized Info structure in Quality R3 410 Client box.
Error Message : "LIS Updating is still activated in 411 Client".
I have tried to get the access to 411 client but it went in vain, as nobody seems to know about its existence.
Could anyone tell me how to generate delta updaing?
Regards
Saddy

Hello,
Check the following thread,
Error - LIS updating is still activated
hope it helps,
assign points if useful.

Similar Messages

Problem extracting LIS data

Hi,
We are having problem extracting LIS data.
I have cheked the delta queue (RSA7), and 2LIS_13_VDITM has total 0.
I have also checked transaction LBWQ, and can see that the MCEX13 has got 150028 entries and MCEX11 has got 12811 entries in the queue. It has destination NONE and status NOSEND.
What can I do to transfer all these entries to the delta queue so that they can be loaded to BW?
BR,
Linda

Hi Linda,
search form RMBWV in the ABAP input box (job name = *, user = *)
goto SMQ1 in the source system; you'll see LUWs for the MCEX* queue.
in this tran you also see your BW delta queue; do you see LUWs as well for your datasource?
you can schedule the update job via LBWE / job control; once executed, the LUWs for MCEX* should decrease and your BW LUWs should incerease...
let us know
hope this helps
Olivier.
Message was edited by:
Olivier Cora

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

Delta not supported by LIS

Hi BW experts,
I created a infostructure s800 for sales & distribution application and generated a datasource on it, i'm able to upload the data from this datsource through full update mode into BW.
But i'm unable to load the data through delta upload, the information after executing "display settings" option shows a point "Information 023 Delta updating is not possible in LIS".
Why is this happening, cant we do the delta upload through customized infostructures.
Ur valuable information will be rewarded.
thanks & regards

Hi Pradip,
once again thanks for ur efforts,
here in my prd system the log is as follows:
010 Settings for Business Information Warehouse Customizing
011 Information structure: S800.
014 LIS environment has been set up
022 'Complete update' mode is supported
024 The 'delta update' mode is not supported
026 Delta updating is not possible in LIS
003 DataSource: 2LIS_01_S800 was generated
apart from 24 & 26 points everything is the same, why it happened so i'm unable to analyse the problem. As it is mentioned i'm unable to load the data through delta, the error message in BW shows:
"Faulty DataSource 2LIS_40_S800 or error in LIS environment for S800".
i was able to do the init but the delta failed with the above error message.
is there any other way without using the ODS to load the delta data, as the data generated daily is huge.
regards.

Msi k7n2 delta ilsr problem

hi i have this configuration on my pc:
antec true control 550 watts
msi k7n2 delta ilsr
kingston hyper x pc3700 2x512 mb
athlon xp 3200+
seagate 120 gb sata 7200.7 hd
ati radeon 9800 pro excalibur ice q
i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

Foxtrotccs,
In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
Make sure you are running the lastest nVidia nForce Drivers and the latest ATI Catalyst Drivers
Take Care,
Richard
P.S. There is still a possibility that the Kingston RAM is the problem.

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Word report generation problem

I have a problem with my report generation toolkit. I have programmed a test program (main_program), where i can load a data and print it to a word document.
First i have to load the data(data.txt) and then i have to push the print button.
The header of my is ok, but when the Subvi (write2) tried to generate the graph in the Document always an error occured!
I got an error message but i don*t found the reason why the program stops!?
Error Message:
Fehler -2146827284 ist bei Exception occured in Microsoft Graph, Die Interior-Eigenschaft des Series-Objektes kann nicht zugeordnet werden.. Help Path is C:\Programme\Microsoft Office\OFFICE11\1031\graph10.chm and context 0 in Word_Set_Chart_Colors.vi->Word Set Graph Colors.vi->write2.vi->Report.vi->Main_program.vi aufgetreten
Could sombebody help me, please???
Best regards,
Peter
Labview 7.1 on Windows 2000
Attachments:
program.zip ‏94 KB

Another question....
I want to make a axis label for the y-axis. I can do this with the "word set graph font.vi"!
But when i make this, the label is horizontally. Where can i change this label to vertical???
see the attachement....
Best regards,
PETER
Labview 7.1 on Windows 2000
Attachments:
word.jpg ‏30 KB

IPod Touch 8gb First Generation Problem

Dear Apple Discussions:
I just recently acquired a iPod Touch 1st Generation from Ebay.com on May 3rd 2010. Here is the link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180501743808&ssPageName=STRK: MEWNX:IT ~~~>And it just arrived here today, 5/8/2010. My ultimate problem is that it won't turn on. I've tried the button "trick" but with no success. I've scanned the internet and nothing can be found. I'm not sure of its been Jailbroken. This is my first Apple iPod Touch. I also have a Apple iPod Nano 5th generation. The 5th generation iPod Nano from Apple.com is recognizable in iTunes but when I go to connect the iPod Touch 1st generation 8gb from Ebay.com it doesn't connect at all. The iPod Touch is completely unresponsive to anything that I do. Any help at all would be tremendously appreciated.
-Branden Hunter (ShadowKissedDhampir)

What I mean't for the "button trick" was:
If you found your ipod touch is 'dead', ie won't turn on, holding the power button (top right on
Ipod) does nothing, your comp doesn't even recognise it, iTunes also - then you might need to do the following :
1) Start your iTunes and connect your iPod touch to your comp.
2) Keep holding the POWER button (top right) together with the HOME button (centre, bellow the ipod screen) for about 10 seconds. You should hear a sound(s)..
Release the POWER button ONLY, keep holding the HOME button, you will again hear some sounds.
3) If you did it correctly iTunes will tell you that it has detected an iPhone or iPod touch in recovery mode.
You should be able to re-sync all your previous ipod content from there...
Sorry, if this was already posted somewhere here, but I just recovered my ipod after searching the net, so wanted to share it..
I did donload and re-isntall the latest Itunes before I did the above, so try that if the above doesn't work the 1st time out..
Source:
http://en.kioskea.net/forum/affich-93387-my-ipod-won-t-turn-on
I think I'll try what you said now. Thanks much :)!~ Sincerely, Branden

Nano 2nd Generation, Problems with Songs ???

Hello, I have transfered songs from my iTunes to my Nano and there is 2 songs that play for couple of seconds than just stops and goes to the next song. Weird thing is when i go to play the song directly from iTunes it plays normally. I have also downloaded the songs to my Ipod Video 30gb and the same exact songs play normal with no problems. ?????? I just dont understand whats wrong. I have even did the 5 R's and restored my Nano and still the same problems with just those 2 songs. I could just go without those 2 songs but, it just makes me curious to why it works in iTunes and on my Ipod Video 30gb, but not on the Nano. If you have had this problem before or know of a solution your help would be greatly appreciated. Thank You for taking the time to read this...
Ipod Nano 2nd Generation Other OS Windows Vista

I have this exact same problem, but after doing the 5 R's it is now cutting songs short that didn't have that problem before. Unlike Junz, I can't live with random songs being cut off. I am very interested in an answer as well.

Scenarion of Delta Load problem in COPA Extraction

Please get me the solution for this particular scenario.
Let us suppose that i created the datasource some 1 year back and running the deltas successfully since then.
Let us number the requests from 1,2,3... and so on since 1st jan 2009. And let us suppose each request loads
some 1000 records everyday from ECC to BI.
Now on 10th august some change was made to ECC( such as change in the User Exit ) that caused the mismatch in number of data records ( loading only 950 records ) since the change was made on 10th August. But I identified the problem on 17th august with request number 160. Let us say those request numbers are 153(10th),154(11th),155(12th),156(13th),157(14th),158(15th),159(16th),160(17th). I fixed the program in ECC on 17th and further the requests from request number 160(17th) are fetching the correct number of data records. Now I need to delete the data in BI for request numbers 153 till 159 since they are not reconciling the data of ECC with BI. Now we reload the deltas for such requests from ECC to BI. So how do I reload the deltas now in this scenario since ECC system keeps track of the last delta ie.. on 17th august(Req no 160). But how do I Load the deltas from req number 153 to 159 from ECC to BI.
One proposed solution to this problem was setting the timestamp of COPA to 10th august. But it is not advised to set the timestamp for COPA datasources using the KEB5 transaction in a production system.
Now in this scenario how do I load the request numbers 153 to 159 from ECC to Bi to fetch the correct data records for that period. Please propose a solution for this problem ASAP. U can also call me back whenever u need.
Thanks in advance

As stated in a previous post...
How you choose to do this can be summed up by the question: Does the target for this data have cumulative or non-cumulative Key Figures?
If you are doing an overwrite to the Key Figures, you could just execute a Full Repair InfoPackage that extracts the data for the days that you found inconsistencies instead of attempting to change the timestamp in KEB5 on the source ECC environment.
However, if you're target has cumulative Key Figures you're left with very few options (a couple of them are time-consuming):
1) Changing the timestamp in KEB5, if your plug-in is PI 2003.1 or older. Newer versions of the plug-in do not allow the changing of the timestamp as was pointed out by Ferruccio earlier.
2) Deleting the keys in the target InfoProvider for those records that you extract in a Full Repair extract.
3) Delete all data in BW for COPA and start from the beginning. This may be your best bet for cleaning up the issues in this scenario.

Mac Pro (First Generation) problem with 1TB Seagate Barracuda

Hi Macianer,
I have a first generation Mac Pro which was sold with max. 750GB Hard drives for each bay. At this time I am grabbing for straws and maybe someone has any info on this problem.
I purchased 4 x 1TB Seagate Barracuda hard drives ( Model: ST31000340AS / Firmware: SD15 ), did a regular format after I purchased them ( GUID Partition Table, Journaled HFS+ File System). I am using 2 of them internally (they get quite hot and i didn't want to put all 4 of them in there) and two of them externally (backup purposes). The other two internal bays are covered by 2x 500GB Barracuda drives.
I put all four 1 TB hard drived through a 1 week stress test to make sure I am not dealing with bad apples. So far this practice served me well.
Now 2 weeks later one completely crashed (internal boot drive). It sounded to spin up alright but was not accessible at all. I went to BestBuy and GeekSquad said this drive is crashed and I returned it.
Since I had a backup I didn't worry too much. I put the back up hard drive in as the new boot drive (since it was a SuperDuper duplicat) it worked like a charm. Now the second hard drive starts temporarily freezing the system for 2-4 minutes and seems to get stuck showing the great colored ball of doom. After the freeze it continues to operate normal again and I am able to continue my work.
I ran the Disk Utility and I got the following message:
INVALID KEY LENGTH
VOLUME CHECK FAILED.
ERROR: FILESYSTEM VERIFY OR REPAIR FAILED.
It just seems weird, I never had problems with hard drives and now I get these problems with 3-4 week old hard drives.
I was in a chat with seagate support. First question to trouble shoot: Do you have access to a PC. My answer was no since Microsoft Vista I donated all of them to the Salvation Army. He asked if I formatted the hard drives low level and MBR with HFS+. I said since I do not have access to PC nor do I plan on using my hard drives for PC I formatted it regular with GUID and HFS+. I asked if there is any history of these drives that would help explain my experience. I was hoping for a recall or something of that sort or something that a firmware upgrade would remedy.
I guess my question is, is the first generation Mac Pro, even though it seems to format and run them fine, not able to handle 1TB hard drives on a daily basis. Or am I dealing with hard drive problems? The Seagate guy didn't seem to be of any help.
Any help is appreciated or even pointers that would help me in finding the problem.
Cheers,
PixelGrinch
Message was edited by: PixelGrinch

Excellent questions, I too am looking at SSD.
Some things I know about SSD:
1. Intel recently released new firmware for their SSD drives to improve long term performance including Trim/Garbage collection.
2. SSD drives can be setup as SLC or MLC - SLC is faster read 2X, write 4X over MLC, however SLC is smaller capacity. SLC also has a longer life span.
3. Intel plans to have an 320GB X25-M (MLC) and a 128GB X25-E (SLC) out soon.
OSX does not fully support Trim and I'm not aware of any 3rd party software for OSX that helps in the garbage collection area. Diskeeper 2010 for Windows 7 provides full support for all variants of SSD, but nothing on the Mac side.
I'm probably going to wait for 2010 to see what comes out, SSD appears to be good news, but it still also seems to have issues. Given the cost of these drivers and the frequent firmware updates, a wait and see is my choice.
I've thought about going with a SAS RAID controller and 15K RAID drivers, but the cost/performance ratio comes out about the same and the 15K drives are noisey and power hungry but they're a "known" entity.
Rob

IPod Touch 3rd Generation/4th Generation Problems

Okay, i got a new iPod Touch 4th Generation yesterday and im having some troubles. (I also have a 3rd Generation)
My first problem is I bought a seperate (not apple) charger for my 3rd generation. its a black USB cord that connects from the iPod to a wall charger. It's been working perfectly and ever since i tired plugging it into my 4th generation, (i had a bit of trouble putting it in the 4th generation, i first thought that it was too small for it, but then with a little, maybe more, force it went it. And ever since i put it in the 4G its been having connection problems, its like connection thing (on the cord) got messed up, and when i go to pick up my iPod (either one) when it's plugged in, it's like it comes unplugged (but it will be in the iPod) if you move it around a certain way (i've learned not to wiggle it, because of the damages it causes) and it will do that (say its unplugged, when it's not) for a couple of times and then on iTunes it says "iTunes could not connect to this iPhone because an unknown error has occured (0xE8000001)" the thing that confuses me is that i DONT own/have an iPhone. so any help on that?
my second problem is that i was hoping to being able to transfer all my apps on my iPod(3rd G) to my new one (iPod 4G) and i am having trouble with that. It's like iTunes isn't putting the app data onto my library, when i plug in my iPod(3G) i'll press transfer purchased apps, and its like it didn't tranfer anything and when i go to my library on iTunes there will be a little "!" next to an app and if you double click on it then it says "The app '___(name)___' could not be used because the original file could not be found. Would you like to locate it?" and all the apps that it "cant locate" are STILL on my iPod, and some of the apps that it can't locate are some that i bought.
its a lot of stress that im going thru right now because of these problems, if you can help me out in ANY way possible, can you please do so? thank you very muchh!!!(:

Try getting the "BUMP" app from iTunes. I have it(but I haven't tried it yet.) Supposedly you can use it to transfer Apps "from your iPod to a friends iPod". This may help with the transferring of your apps.

APEX 4.1 - APACHE FOP PDF generation problem.

Hi all,
I'm having problem with PDF generation using APACH FOP on OC4J.
When I test my print server as described here:
http://marcsewtz.blogspot.com/2008/06/heres-another-posting-on-pdf-printing.html
everything works without problem. But when I upload my Layout to APEX and try to generate PDF from apex I'm getting error:
oracle.xml.parser.v2.XMLParseException: Unexpected EOF.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
     at oracle.xml.parser.v2.XMLReader.popXMLReader(XMLReader.java:549)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1375)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:362)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:308)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:337)
     at oracle.xml.xslt.XSLProcessor.newXSLStylesheet(XSLProcessor.java:714)
     at oracle.xml.xslt.XSLStylesheet.<init>(XSLStylesheet.java:322)
     at oracle.xml.parser.v2.XSLStylesheet.<init>(XSLStylesheet.java:114)
     at apex_fop._jspService(_apex__fop.java:71)
     [SRC:/apex_fop.jsp:21]
I could see similar post here:
Handling Special characters in call to apex_util.download_print_document
But it doesn't explain my case as it's crashing even when I generate empty pdf(no data so no special characters, only empty XML file with no data should be sent to print server)
Is there any way to see what xml is sent do print server for processing? That could eventually show where is a problem.
Palo

My mistake, there was really an "&" character in my template. now when I replaced it with %26 it works.
However I would be still interested if there is a way to see what data is APEX engine sending to print server cause it will help me to find this kind of errors.
Palo

XML generation problem?

Hi I'm relatively new to Flex 2 and I have a question.
I'm generating an xml file from an oracle view and hope to
use it as the basis for a chart/data grid.
My generation process yields data something like this:
<list>
<commodity name="Laptop Computer" total="0">
<warehouse name="California" onhand="10"/>
<warehouse name="Viriginia" onhand="20"/>
<warehouse name="Washington" onhand="0"/>
</commodity>
<commodity name="Desktop Computer" total="0">
<warehouse name="Washington" onhand="9"/>
</commodity>
</list>
I've taken this generated xml and put it into a local file
for now.
When I attempt to load this data I get this error:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at TestFileAccess/TestFileAccess::resultHandler()
at TestFileAccess/__srv_result()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::onComplete()
My mxml file looks something like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" xmlns="*" paddingTop="3"
creationComplete="initApp()" pageTitle="Warehouse Levels">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.*;
[Bindable]
private var commodData:Array;
[Bindable]
private var warehouseData:Array;
[Bindable]
public var slicedCommodData:ArrayCollection;
private function initApp():void
srv.send();
slicedCommodData = new ArrayCollection();
private function resultHandler(event:ResultEvent):void
commodData = event.result.list.name.source as Array;
warehouseData = new Array(commodData.length);
slicedCommodData.source = commodData;
var commodTotal:Number;
for (var x:Number = 0; x < commodData.length; x++)
warehouseData[x] = {name: commodData[x].name, onhand:0};
var warehouses:Array = commodData[x].warehouse.source as
Array;
commodTotal = 0;
for (var j:Number = 0; j < warehouses.length; j++)
commodTotal += warehouses[j].onhand;
commodData[x].total = commodTotal;
]]>
</mx:Script>
<mx:HTTPService id="srv" url="result.xml"
useProxy="false" result="resultHandler(event)"/>
<mx:Panel layout="absolute">
<mx:ColumnChart id="WarehouseTotals"
dataProvider="{slicedCommodData.source}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{slicedCommodData.source}"
categoryField="Name"/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries xField="Name" yField="Total"/>
</mx:series>
</mx:ColumnChart>
<mx:DataGrid dataProvider="{slicedCommodData.source}">
<mx:columns>
<mx:DataGridColumn headerText="Commodity"
dataField="Name"/>
<mx:DataGridColumn headerText="Total"
dataField="Total"/>
</mx:columns>
</mx:DataGrid>
</mx:Panel>
</mx:Application>
I'm wondering if something is wrong with my generated xml
data or if its something else. I did notice that my xml generation
doesn't always produce 3 warehouse tags for every commodity. Could
this be the problem?
Also, the reason the commodity tag's total is always 0 in the
xml is because this information is not captured in the view...I use
mxml to calculate that.
Thanks!

It seems that I played with it for a while and fixed it. The
problem was my xml data and the format my httpservice was
returning. First my xml data needed to be enclosed by <data>
and </data> tags not <list> and </list> tags.
Second my httpservice needed to have a result format of e4x. This
also caused me to have to change how I was handling the individual
xml properties of the data.
Anyway the fixed code looks like this for anyone that cares
and has gotten a similar error.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*" paddingTop="3" creationComplete="initApp()"
pageTitle="Warehouse Levels">
<mx:Script>
<![CDATA[
import mx.collections.XMLListCollection;
import mx.rpc.events.*;
[Bindable]
private var commodData:XMLList;
[Bindable]
public var slicedCommodData:XMLListCollection;
private function initApp():void
srv.send();
private function resultHandler(event:ResultEvent):void
commodData = event.result.commodity;
slicedCommodData = new XMLListCollection(commodData);
var commodTotal:Number;
var nextNum:Number;
for (var x:Number = 0; x < commodData.length(); x++)
var warehouses:XMLList = commodData[x].warehouse as XMLList;
commodTotal = 0;
for (var j:Number = 0; j < warehouses.length(); j++)
nextNum = 0;
nextNum = new Number(warehouses[j].@onhand);
commodTotal = commodTotal + nextNum;
var firstItem:Object = slicedCommodData.getItemAt(i);
firstItem.@total = commodTotal;
]]>
</mx:Script>
<mx:HTTPService id="srv" url="result.xml"
resultFormat="e4x" result="resultHandler(event)"/>
<mx:HDividedBox width="50%" height="100%">
<mx:ColumnChart id="WarehouseTotals"
dataProvider="{slicedCommodData}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{slicedCommodData}"
categoryField="@name"/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries xField="@name" yField="@total"/>
</mx:series>
</mx:ColumnChart>
</mx:HDividedBox>
<mx:HDividedBox width="50%" height="100%">
<mx:DataGrid dataProvider="{slicedCommodData}">
<mx:columns>
<mx:DataGridColumn headerText="Commodity"
dataField="@name"/>
<mx:DataGridColumn headerText="Total"
dataField="@total"/>
</mx:columns>
</mx:DataGrid>
</mx:HDividedBox>
</mx:Application>
Thanks for all of your help!

SOAP wdsl generation problem j developer

hi im having a problem with wsdl file generated from jdeveloper.
I expose a pl/sql function as a web service. I can then conect to the soap url with a web browser and sucessfull publish data to the db from this , but if i take the wsdl file from jdeveloper in to a soap test client (magoo) i get an error, on anything that trys to post data back to the DB ???
the error is
No Deserializer found to deserialize a ':emp' using encoding style 'http://schemas.xmlsoap.org/soap/encoding/'.
im not using BPEL (which i know has some soap problems)
THIS IS THE SOAP MESSAGE THE WSDL FILE GENERATES
<?xml version='1.0' encoding='UTF-8'?>
<soapenv:Envelope xmlns:m='MyWebService-v9' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:ns1='http://oadev11/Company.xsd' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/'>
<soapenv:Body soapenv:encodingStyle='http://schemas.xmlsoap.org/soap/encoding/'>
<m:addemp>
<emp>
<eid xsi:type='xsd:int'>7</eid>
<efirstname xsi:type='xsd:string'>mr</efirstname>
<elastname xsi:type='xsd:string'>magoo</elastname>
<addr>
<street xsi:type='xsd:string'>granby grove</street>
<city xsi:type='xsd:string'>southampton</city>
<state xsi:type='xsd:string'>uk</state>
<zip xsi:type='xsd:string'>so</zip>
</addr>
<salary xsi:type='xsd:double'>1000</salary>
</emp>
</m:addemp>
</soapenv:Body>
</soapenv:Envelope>
this returns an error,
No Deserializer found to deserialize a ':emp' using encoding style 'http://schemas.xmlsoap.org/soap/encoding/'.
ive tested the client with the googlesearchapi wsdl file, so the client is working ok, I think there might be a problem with the wsdl file generation. can anyone sugest what this might be?
conecting directly to the soap service url and submitting xml suggested by the interface, adds the entry to the databse and works fine
<emp xmlns:ns1="http://oadev11/Company.xsd"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ns1:oadev11_EmployeeUser">
<eid xsi:type="xsd:int">7</eid>
<efirstname xsi:type="xsd:string">MR</efirstname>
<elastname xsi:type="xsd:string">MAGGO</elastname>
<addr xsi:type="ns1:oadev11_AddressUser">
<street xsi:type="xsd:string">Granby grove</street>
<city xsi:type="xsd:string">southampton</city>
<state xsi:type="xsd:string">uk</state>
<zip xsi:type="xsd:string">SO</zip>
</addr>
<salary xsi:type="xsd:double">1000</salary>
</emp>
This sucessfuly ads the entry to the databse any ideas please?

Hi,
Action parameter is always under Opertaion tag of your wsdl. In your case it is
Action = rpc/http://siebel.com/CustomUI:ATDDQMatchWS
<operation name="ATDDQMatchWS">
<soap:operation soapAction="rpc/http://siebel.com/CustomUI:ATDDQMatchWS"/>
<input>
<soap:body use="literal" namespace="http://siebel.com/CustomUI"/>
</input>
<output>
<soap:body use="literal" namespace="http://siebel.com/CustomUI"/>
</output>
</operation>
It looks to me you are trying to invoke RC encoded webservice which is not supported in XI.
Reward points if find useful
Thanks
Amit

Delta generation problem in LIS

Similar Messages

Maybe you are looking for