Delta in some data target and nor present in other data targets

Hi Experts ,
2LIS_13_VDITM   delta is getting updated to 2 different cubes and one dso
in one dso and one cube datta got loaded on 10/12/2009
and in  secoend cube data was present till 11/12/2009
pl tell be how to get  delta till now
and there is no data in psa
Thanks  very much in advance
Nitya

Hi Nitya,
Case 1 and 2 :- In one dso and one cube datta got loaded on 10/12/2009 and in secoend cube data was present till 11/12/2009
Solution One :-If Previous Load was Delta Load
If the data load to these Infoprovider on thoise Dates (10/12/2009 and 11/12/2009)  was Delta then just trigger Delta thru DTP ,it will trigger Delta load till date.
Solution One :-If Previous Load was Full Load
If the data load to these Infoprovider on those Dates (10/12/2009 and 11/12/2009)  was Full Load then u have to do a Full Load with Selective Pull based on ur Cal Day /Date.
Rgds
SVU123
Edited by: svu123 on Jan 13, 2010 6:21 AM

Similar Messages

  • Time Capsule best to dedicate for backup and usb external for other data or partition TC for dual

    I have lots of video and photo and have 2TB drive on my iMAC and want to use TC for backup. 
    1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC?  Otherwise very slow via wireless and perhaps better to get Seagate Go Flex or WD and go Firewire right?
    2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
    Here's my use case:
    1) Time Machine tied to TC for the 2TB via wired to main machine iMAC - I only have this 1 iMAC.
    2) Like to share data with iPhone and iPAD some pictures, etc...  so do this with USB port and see data on the shared drive via iPhone and iPAD - no need to backup - just viewing - but need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
    3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
    Sorry for multi questions - my first iMAC so still stumbling around to see what works best for me.
    Thanks,
    ///don

    don1217 wrote:
    1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC?
    If I understand your question, depending on the signal strength, backing up over Wi-Fi can be rather slow.  An Ethernet connection would be much faster, particularly for the first backup, which will the the largest.  Backing up to a locally-connected disk will be faster still.
    2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
    I'm not sure what you mean by "mix partition to do 500GB per say for data on the TC".  It's not recommended to share the same volume for Time Machine output and other things.
    need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
    If you mean that you need wireless to give an iPhone or iPad access to the Internet, a Time Capsule would do that.  If you want to give those devices access to content on a Time Capsule, that's still an immature technology, although things may improve with iOS 5 or updates beyond that.
    3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
    A WIn7 computer will be able to see files on the drive(s) of a Time Capsule.  I haven't tried that, but instructions are available.

  • HT4847 How i can download my backup data? And how to manage the data on i Cloud?

    How i can download my backup data? And how to manage the data on i Cloud?

    You can't download an iCloud backup, except to restore it to your device should you ever need to.
    iCloud data can be managed within the apps on your iPad.  Any changes to the data within the apps corresponding to the data you are syncing with iCloud will take place in iCloud.  You can also manage some of this data on icloud.com from your computer.
    This article explains ways to manage your iCloud storage space, should you need to reduce you iCloud storage: http://support.apple.com/kb/ht4847.

  • Create prompt with date-filter and initialize it with current date

    Oracle BI 11 g
    Hi!
    I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
    I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
    After that I tied to use Presentation Variable in Prompt, but also without success ((
    Please, help me.

    I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

  • What is considered Data in a Data Plan and how can I reduce data usage?

    What is considered Data in a Data Plan and how can I reduce data usage?

    All the above, if u want to reduce try having your phone on wifi when you can like at home.  Also setting your major downloads only when you connec to wifi like updates etc

  • Data Extraction and ODS/Cube loading: New date key field added

    Good morning.
    Your expert advise is required with the following:
    1. A data extract was done previously from a source with a full upload to the ODS and cube. An event is triggered from the source when data is available and then the process chain will first clear all the data in the ODS and cube and then reload, activate etc.
    2. In the ODS, the 'forecast period' field was now moved from data fields to 'Key field' as the user would like to report per period in future. The source will in future only provide the data for a specific period and not all the data as before.
    3) Data must be appended in future.
    4) the current InfoPackage in the ODS is a full upload.
    5) The 'old' data in the ODS and cube must not be deleted as the source cannot provide it again. They will report on the data per forecast period key in future.
    I am not sure what to do in BW as far as the InfoPackages are concerned, loading the data and updating the cube.
    My questions are:
    Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
    Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
    Your assistance will be highly appreciated. Thanks
    Cornelius Faurie

    Hi Cornelius,
    Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
    -->> Try to load data into ODS in Overwrite mode full update asbefore(adds new records and changes previous records with latest). Pust delta from this ODS to CUBE.
    If existing ODS loading in addition, introduce one more ODS with same granularity of source and load in Overwrite mode if possible delta or Full and push delta only subsequently.
    Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
    --> Yes, It is correct. Otherwise you will loose historic data.
    Hope it Helps
    Srini

  • Time Machine: removing the backup drive and using it for other data

    I am trying to stop the time machine backups of my data and use my External HD for other data. Ia m new to the MAC world and I need to know how to do this. Almost like I want to shut Time Machine down and reformat the disk that was being used for the backups. Thanks for the help.

    The big switch in the Time Machine preference pane stops Time Machine from performing automatic backups. I would be inclined to recommend you switched that to off but left the disk assigned as designated backup disk on the Change Disk panel because, if there is nothing assigned there, Time Machine will ask you every time a disk is attached which it could use whether you wish to so assign it.

  • Can i del. master data if that object used in other data providers.

    hi everybody...
    in IO '0material', i have some data. but i need to delete that. while deleting it is saying that 0material is used in other data targets...first u delete that then u can delete from 0material...
    but what i found is even tho 0material is used in number of data targets, no data target is provided with data from 0material. so im not able to understand what to delete from data targets...shud i del the 0mateial IO from those data targets or what????
    pl clarify me
    thank u...
    nith

    Hi Nith,
    I am not quite sure about your issue, but here some additional hints.
    - you cannot delete a infoobject if it is alread used somewhere else (e.g. in attributes of another infoobject, in ods objects, in cubes)
    - you cannot delete the data of a infoobject if the data is already used somewhere else (e.g. see above). The system checks the used records and only the records that are not in use will be deleted. You can check yourself which records are already used or not. In the sid-table of the infoobject you'll find a flag datafl. If it contains a 'X', the record is used.
    Hope it helps!
    regards
    Siggi

  • My harddrive data is consumed by over 72% "Other" data.

    I've looked intensively at Pondini's tips and used them to check, but nothing is clearing the "Other" data. I have no room - 87.41 out of 120.47 consumed by "Other". Macbook Air, OS X 10.7.5, 120.47 GB. The data that takes up the majority of space on my harddrive is Apps, 7.24 GB; no data store is larger than that, or even close. I have many documents, but not enough to warrent this immense amount of "Other" data. I don't use Time Machine, and I don't have any backup on this computer. I'm concerned something is wrong, at this point.

    Applications -> Utilities also contains apps.
    Any 3rd party application you have stored somewhere else because you dragged and dropped it from a .dmg you downloaded, is still an app.
    Apps are basically directories where the name ends in .app (technically the contents of the .app named directory has to have the guts of a real applications, but Mac OS X uses a directory named .app as the convention for storing an application).
    You the  Applications -> Utilities -> Terminal command:
    find / -type d -iname '*.app'
    to find all the .app files on your Mac
    You can use a utility such as OmniDiskSweeper to find where all your storage is being used on your Mac
    <http://www.omnigroup.com/more>
    <http://www.macupdate.com/info.php/id/7402/omnidisksweeper>
    DO NOT delete files in your Home Folder -> Library tree as there are things like your iPhone backups, your email messages, your application preferences, etc...
    DO NOT delete files outside your home folder, as you may end up deleting something essential to Mac OS X, and turn your Mac into an expensive “Door Stop”.
    I will point out that you will find some very large files in private -> var -> vm (these are the Mac OS X virtual memory paging files and where Mac OS X stores the copy of RAM when your Mac is put to sleep).  The page files get deleted on reboot, and the sleep image is just going to be created again when you put your Mac to sleep.
    If you think you have found something to delete outside your home folder, it would be best to ask first before deleting.  There are many examples of people deleting files outside their home folder, or renaming files, or changing the ownership or permissions of files, and then their Mac stops running.  Do not be one of those people.  Ask first.

  • Send 102 bit data through the LPT port??I have to send 102 bit to my interface board using the LPT port, through one of the data line and be able to read data from the input line, I don't know how to realize such a task.Thanks

    Let me describe you the program I have to write:
    I have to send 102 bit serialy using one of the data line of the LPT port to a device and be able to read back data sent from a device register throug one one of the input port pin for instance pin 10 of a DB25, and synchronize the transmission by the PC clock(for write and read). If fact I am using 5 output control(D0...D4) signal from the LPT port, RST, TXD, CLK, CE,TEST, one input data RXD (pin10)
    So the program should work in normal mode (write data, read data), and test mode (use the write p
    rocedure). Since I am quite new in Labview I am little lost and I need some support or exemple that use a way to send more than 32 bit via one data line(in my case 102bit= 8 bit COMMAD(MSB)+88 bit SPI DATA+6 bits CRC(LSB)) and be able to read them back, place them in the register and be able either to monitor or modify them.
    I know that there are plenty of exemple but if I can gain time by being helped it would be great.
    Can you please advise?

    Hi Beni,
    find attached a SPI.vi - minor changed from one of
    my typical SPI's (LabVIEW 7.1). With some simple changes it will fit to your application.
    The only thing you need to do - prepare
    the bits for the input-array.
    If you need some more comments - find one of my email
    adresses in documentation of this vi.
    Regards
    Werner
    Attachments:
    102bit_SPI.zip ‏90 KB

  • DVD ok on some DVD player and TV, not on others...

    hello,
    I am working on my first DVD, but i have problems. I have test menus of all sort: movie, text directly writed in the buttons on a still image... When i test the DVD on my TV and DVD player or on my computer it is correct. But when my boss or my client test it, they say it is blurred...
    I know it is difficult because text is dark on a white background. but since it work at home, why cant it work everywhere ? What do i have to look at to be sure that my DVD will work everywhere .? i am completly lost....
    For info : I work my movie in Flash, export in Quicktime ( animation, best quality) and after export from QT in m2v. For the moment i have no sound...
    I encode in VBR two passes, bitrate 7,5 to 9, best encoding...
    Please help me, i am getting crazy...

    all the images of the menu "vibrate"...or jump ..
    If you are using small text, or you have created your graphics with fine lines or details, or horizontal lines smaller than 4 points, you will see this jumpiness.
    Your only solution is to blur your menu graphics a little bit. Obviously this is not possible if you created your graphics or text in DVDSP, only if you create them in Photoshop et al (or you can blur motion graphics in FCP or After Effects).

  • Other data on iphone 2.5 gb, genius data????

    My 'other' storage has steadily grown. It's now at 2.5 gigs. It annoys me that it's days I can't account for. Under usage on my iphone the apps list never tallies up. So I am referring to other (yellow bar) when you sync in iTunes. There are do many possible causes and many suggest resetting as new phone is only true fix but I think that's very drastic. Anyway it tends to manifest itself on usb syncs with iTunes. I don't sync often but every now and then the increase in other seems to occur its not more music, vids or apps as I rarely add anything. I think the culprit could be 'syncing genius data' which seems to happen periodically. Does anytime else notice same pattern. What on earth is this genius data sync anyway. I have no idea what it's doing and how to stop it (without disrupting iTunes Match)

    Thank you. Unfortunately I tried iMobie a while back, small insignificant gains. I really think restoring phone as new is draconian. I believe I have identified the culprit as syncing the phone to itunes on the computer. I don't do it often but sometimes when this happens it goes through the whole cycle of syncing genius data. I am pretty sure this is when the 'other' grows. For example last night it did it. After it finished my available space decreased by some 300 mob and I saw the other data had gone up from 2.1 gigs to 2.4 gigs. So I wanted to find out if this genius data sync can be stopped. I don't see what benefit or affect it has on my phone. And by preventing it is ther a possibility of reclaiming some of this 'other' data. I do understand other can creep up a bit what with cloud services, mails, messages etc but I am pretty certain genius sync is to blame.
    My phone is 32gb so I would of been pretty stuffed if I had 16 gb version. Even so to lose this amount of data to 'other' is still pretty annoying. Having to avoid syncing to itunes in the future because of this is not sonething I want to do
    Cheers
    Wayne

  • Query data being picked from which data targets and dimension tables.

    Hi Guys,
    I need help from you people.
    My query is "If we execute any query, i want to know from which data targets and from which dimension tables data being read in the run time", is there any program or any table to find this data.
    thanks in advacne.
    Regards
    Prasad

    Hi Prasad,
    We will get Data target information in query level in information TAB.
    If you want get dimension tables information also you need use technical business content(bwstatistics) Cubes and need to customize the required information. I think standard statisics cubes is not provide dimention tables information. Need to customize that.
    Hope it will help for you.
    Thanks,
    Chandra

  • I want to make a delta for datasource of 0hr_pa_1 and 0hr_pa_0

    i want to make a delta for datasource of 0hr_pa_1 and 0hr_pa_0,because our transction data are not maitain on time, so the full update which depend on the time will lost many data, could you give me some suggustion pls? thanks
    allon

    Hi,
    Please search for the related threds in SDN, I think the following links will help you.
    Re: Any other option to accomplish Delta load mechanism?
    http://help.sap.com/saphelp_sem320bw/helpdata/en/29/02b43947f80c74e10000000a114084/frameset.htm
    Thanks
    reddy

  • Having difficulty reading data file and doing analysis, maybe DIAdem can help

    Hello,
    I am new to DIAdem but I think it may be helpful to my application.
    I used Write Labview Measurement File VI with n-signals input to generate a data file containing 2*n columns(time column and data column iteratively). Now I need to do data analysis from the file. I'd tried to use Read Labview Measurement File VI to load the data but didn't work. I found that it can only read file with one signal as input and without file header. But why?
    What I want to do is to extract specific columns from the file. Some column has special flag values which divide the column into sections. I also need to extract these sections from the column and plot each of them. I know this can be easily done on other data analysis software but is there any way I can do it on Labview? Can DIAdem help with this?
    Thank you

    Hello,
    To answer your last question first, DIAdem can certainly help. You can open the TDM file you created with the Write LabVIEW Measurement File VI with DIAdem. If you navigate to the TDM file in the External Data window of DIAdem NAVIGATOR, you can drag and drop the file into the Data Portal and use the channels of data at will.
    You can also right-click on the file in the External Data window and choose Selective Opening…. There is a Help button in the Selective Opening window which will tell you more about using this feature.
    Either way, once your data is in the Data Portal, you can use the DIAdem ANALYSIS to perform a wide range of analysis on your data. For more on the capabilities of DIAdem, I recommend starting at NI DIAdem.
    Now, in regards to using the LabVIEW to access the data in your TDM file, this is also possible. If you are using LabVIEW 7.1, you will want to look at the Read Channel Groups example. This example uses a sequence of VIs from the Functions>>All Functions>>FileI/O>>Storage palette. The example demonstrates reading multiple channels from a TDM file.
    Regards,
    Eric M

Maybe you are looking for