Delta init accidentally deleted (urgent)

Hi,
I accidentally reinit an ODS after some delta request is loaded to it. I actually wanted to load this delta further up to some cubes, but now it's always 0 record because of the reinit. How can I load this delta to the cubes in this scenario?
A bit urgent. Thank you!

Hi Bin,
Dont worry, run the infopackage without datatransfer and initialize ODS, after that you can run delta from ODS to CUBE....
Check out and revert if you still facing prob...
Cheers'
HVR.

Similar Messages

Automate deletion of delta init

Hi everyone,
We currently have a process in place for a master data delta load - where if the load fails - a delta init with data transfer is run.
We are running into issues becase deleting the existing delta init is not part of the process.
Is there a way to automate the deletion of a delta init? I know I can remove it from the RSREQDONE table, but that does not remove it from the Infopackage -> Scheduler -> Initialization Options for Source system. If its not deleted from there, then the delta init with data transfer does not work.
Any suggestions?
Thanks
Charla

To automate the deletion of the delta initialization for a DataSource, use the SAP delivered program RSSM_DELETE_INITSEL_OLTP.

What happend to past delta data if we delete Delta INIT from Cube? safe ?

Hi Friends,
we have a cube where delta data is loaded daily from ODS.
So, cube have many delta requests and data is compressed.
Now have some problem and need to delete Delta INIT from this Cube and run fresh delta INIT again into Cube from ODS. Is that safe ?
If we do this...is there is any problem with past delta data availble in the Cube?
Please confirm..
Thanks
Tony

Hi,
I told you to check this before deleting the init as it very tough to manage it after that.
Now those delta request are missed and I dont think can be retrieved without doing a full repair with proper selection.
If you do a new init then there should be no request without a check for data mart status??
So you found it before deleting the init??Then you should not have deleted the init as I told earlier.
The only option is too reload the whole histroy again if you are not able to load it through selections in infopackage.
First do a selective deletion from the cube for the same selections and then schedule the full load for those selections from DSO.make sure these selections cover the whole scenario.
You cannot do anything else now to correct it.
If you data is not huge in cube then delete the whole data and reload it.
Schedule multiple loads from the DSO at the same time through different infopackages.
this will save time as weill will do the loads in quick time.
Thanks
Ajeet

Need of Change log deletion for a DSO, when DTP delta Init with Active Tabl

Hi,
Thanks for your time, please help me with the following
Scenario: I have Cube1 being updated from DSO1 with DTP delta, for quite some time. As per new requirement, I would need to create new data mart such that Cube2 gets updated from DSO1.
In order to Configure the delta, I am Considering Following options, please let me know, which one is right one.
Note: DSO1 is in Overwrite Mode.
Create one DTP with update Mode "Delta" , and "Active Table". I knew Delta Changes are captured in change log, but my understanding is, when you execute the DTP for the First time, it fetches the records from Active Table. And from 2nd Run onwards the very "same DTP" without "any changes" get the records from change log, even if we choose "Active Table".
is my understanding is Right?
Do I have to consider deleting the change log, because DSO1 is in Production from quite some time which is in Overwrite mode?
Do I have to create a DTP with Delta and Active Table, run the dtp Once(Init), then choose "Change Log for subsequent runs explicitly
please help me with these. I have reviewed many sap help articles and sdn threads but none of them were helpful. all of them explains, difference b/w active table and change log table, also gives scenarios like use a full DTP and then 2nd DTP with Delta without Data transfer. I am not looking for that kind of details.
Appreciate any help, Thanks again
Edited by: curious maven on Mar 28, 2011 8:35 AM

Hi Uma,
Thanks for your response.
to your question, If I need to load all the data from DSO1 to Cube1, answer is NO. if you read my post once again,
Existing Flow is : DSO1 --> Cube1 (Means, Active Table and Change Logs of DSO1 already Filled Up)
Requirement is: DSO1 --> Cube2. (Need to Init the Delta, and Detlas going forward)
My Questions:
(1) Imagine, DSO1 has 10 requests, so we see resepctive data in Active Table as well as Change Log. As a matter of fact, Data is being updated to DSO1 in Overwrite Mode, so all the changes(10 requests equivalent) would be captured in Change Log, which in turn helpful / used when we do Delta from DSO1 to any Cube, in my case, it used to update to Cube1. As per new requirement, it needs to update to Cube2.
My assumption is, if I choose "Active table and Delta in Extraction Tab" in DTP, During First Run (Delta Init), Data would be fethed from Active table. And the 2nd Run Onwards, delta records would be fetehced from Change Log automatically, even if we don't change the selection from Active Table to Change Log.
Is My Assumption Right?,
in this process, Do I have to Delete Change Log
(2) Do I have to Explicitly change DTP setting from "Active Table to Change Log" Once Delta Init has been run with setting "Active table" inorder to get Deltas from DSO1 --> Cube2 ?
Appreciate your help
Edited by: curious maven on Mar 30, 2011 3:14 PM
Edited by: curious maven on Mar 30, 2011 3:29 PM

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

<i>Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.</i>
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Init selection deleted - recover possible?

Hi,
I am selectively initialising the attributes for the business partner. It concerns a new datasource with new attributes for the business partner.
As we have 5,2 million business partners I am initialising this part in ranges.
As for now I had 9 selective inits run properly. One init went wrong this night and I wanted to delete this "red" init in the infopackage settings. I selected only this one, however now all my inits are deleted.
Does anyone know how to restore these init selections? I can see a delta still present in SMQ1 in CRM, in RSA7 in CRM the delta is suddenly 0.
Would appreciate any kind of help!
Kind regards,
Hans de Klein

Hi Hens,
Just check the red request is available in PSA and try to load from there.If not then you have to do init again.
Only option if the data is available in PSA in correct status.
Hope you can solve this.
Regards
Gopal

Question on Delta Init Loads

Hi All,
I have a basic question on Delta Inits. I am a beginner in BW and would truly appreciate any input.
At my company, we currently are doing delta loads on the cube 0RT_C35 (Material Movements). They did the Delta Inits prior to that.
Now if we were to add new fields to the cube and need to populate data to the new fields from the beggining, how do I go about doing it..?
Should I delete the Delta Init requests and redo the Delta Inits..? What will happen to the Delta loads that are running daily then..?
Can someone please give me the steps that I need to follow in a sequence.
Like I said, it might be a basic question..but I am not familiar with this process.
Appreciate your help.

Thank You very much Ravi.
I will not be doing it today based on the priority of the tasks..but this is something I will have to do eventually in the next 1-2 weeks. I will definitely let you know how it goes.
So once the mapping and everything is in place and is ready to be loaded, bascially I need to delete data from the datatarget, put the delta job on hold, reinit the delta requests and then I should be able to do the delta jobs again right..?
Thank You so much.
The other issue is that there are probably 25 Delta inits that they did based on the number range for the Material Nbr. But they have only 1 delta. So does the delta job cover the data for all the Delta Init requests..?
I am assigning full points to you for being such a great help. I will let you know when I actually end up doing this.
I will assign the remaining points when I close the request.
Thanks again

Restoring accidentally deleted pictures?

Hi people
I let my little brother check out my iPhone for a while and when I got it back he said that the he accidentally deleted some pictures. -.-
I urgently need those pictures
I've tried using "Phone disk" to mount the phone as a flash drive and tried running a recovery software but nothing worked.
Any ideas?
Help is greatly appreciated.

As far as I know only camera roll pictures can be deleted off an iPhone & camera roll photos are included in the back-ups...
http://support.apple.com/kb/ht1766
The relevant entry from the support document, as it does list camera roll pictures and videos in what is backed-up.
iTunes will back up the following information:
Address Book and Address Book favorites.
App Store Application data (except the Application itself, its tmp and Caches folder).
Application settings, preferences, and data.
Autofill for webpages.
CalDAV and subscribed calendar accounts.
Calendar accounts.
Calendar events.
Call history.
Camera Roll (Photos, screenshots, images saved, and videos taken. Videos greater than 2 GB are backed up with iOS 4.0 and later.)
Note: For devices without a camera, Camera Roll is called Saved Photos.
In-app purchases.
Keychain (this includes email account passwords, Wi-Fi passwords, and passwords you enter into websites and some other applications. If you encrypt the backup with iOS 4 and later, the keychain information is transferred to the new device. With an unencrypted backup, the keychain can only be restored to the same iPhone or iPod touch. If you are restoring to a new device with an unencrypted backup, you will need to enter these passwords again.)
List of External Sync Sources (Mobile Me, Exchange ActiveSync).
Location service preferences for apps and websites you have allowed to use your location.
Mail accounts.
Managed Configurations/Profiles. When restoring a backup to a different device, all settings related to the configuration profiles will not be restored (accounts, restrictions, or anything else that can be specified through a configuration profile). Note that accounts and settings that are not associated with a configuration profile will still be restored.
Map bookmarks, recent searches, and the current location displayed in Maps.
Microsoft Exchange account configurations.
Network settings (saved wifi spots, VPN settings, network preferences).
Nike + iPod saved workouts and settings.
Notes.
Offline web application cache/database.
Paired Bluetooth devices (which can only be used if restored to the same phone that did the backup).
Safari bookmarks, cookies, history, offline data, and currently open pages.
Saved suggestion corrections (these are saved automatically as you reject suggested corrections).
SMS and MMS (pictures and video) messages.
Trusted hosts that have certificates that cannot be verified.
Voice memos.
Voicemail token (This is not the Voicemail password, but is used for validation when connecting. This is only restored to a phone with the same phone number on the SIM card).
Wallpapers.
Web clips.
YouTube bookmarks and history.

Extending an online number accidentally deleted

How do I extend an online number accidentally deleted which is about to expire in three days

pureinsurance wrote:
Hi, thanks for the information but it doesn't work.
We have an online number (critical to our business) that has been allocated to a member. We can see that the number has expired but there is no option next to the number that we can use to renew the number.
Appreciate that there should be this option (as we've used it in the past) but its not there now.
Could you "Skype" please urgently review and advise?
Regards
You'll have to get in touch with Skype Support. This community forum is not able to dig into your Skype account and try to determine what happened with your Online Number. Also, I'm not a Skype employee, so I apologize for not being able to help you further with this matter.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Accidental deletion of data in contacts application file

While trying to follow instructions from an application web site to correct doubled listing in my contact file, I accidentally deleted the date in the contacts file under applications rather than the contact storage file. (settings/applications/manage applications/contacts. The Droid seems to work OK but I am wondering what I deleted and if I need to take it in and have it somehow restored. Does anyone know what data was in the Contact file?
Thanks

It should just be a simple system file that will not affect the use of the device. However if it does begin to affect the use and operation the device you can always perform a factory reset to clear it back to like new.

Accidentally deleted exchange account and lost contacts....please help

Hello all,
I have a unique problem and I'm worried that it may not be fixable but hopefully it is. Here is the long detailed explanation.
I was trying to start setup for an outlook account to sync my business emails to my phone (which I never got around to doing) I noticed that under mail/contacts etc. that there was an exchange account.....with it being early in the AM and still in bed I accidentally deleted it. I noticed immedietly after that my texts were coming in with numbers rather than contact names. I don't usually use the start mail (blue with white envelope) I had it archived away.....because I have the gmail app which was much more user friendly. Whoever set up the exchange account must have been at the verizon store when i bought the phone possibly. I did not do this myself. Anyways I have a few more problems that makes this issue worse....for some time now my iCloud has been saying it does not have the appropriate amount of storage......(And I assume is not backing up my contacts) I've never really had to use iCloud before so I think this may not help either. I looked on gmail and only certain contacts....older ones were on there. I went to a verizon store and he helped me re-add my exchange account which im assuming was through my gmail email (Only email I really use) and certain contacts seemed to pop up. After leaving the store I realized that a lot of the newer contacts I've added were still missing......I'm not sure what else I can do to recover these contacts if anything but I am now up for suggestion. This is basically where I'm at right now.....not totally missing everything but missing a good deal. Also would like to get my cloud up and running again so this doesn't happen again. I haven't hooked to iTunes yet but I never really did that regularly so that might not help either. Like I said I am up for any suggestion......maybe a way to look up my exchange account if by chance it wasn't under my gmail email account......Thanks in advance!
Sam

You might have luck in the iPhone community. I’ll ask the hosts to move your post there.
iPhone community

How can I access data from accidentally deleted user?

I was given a MacBook Pro by a family member. I set myself as the Administrator, but could not get rid of the previous owner's name on the Home folder.
In my attempts I accidentally deleted something that made the entire computer unaccessable. I can boot up, however, all the work and applications I installed are unaccessable. I can't even open Preferences.
I used TechTool Pro to start up and explore the drive, and found that the previous owner's name was on a folder with a red-circled minus sign. The data (considerable) was inside, but I can't access it.
Is there any way I can get access to that data? I slaved the laptop to my iMac and transferred the folder (with 32 gb of data).
When I tried to open it I got the message: "The folder "sandy....." can't be opend because you don't have permission to see its contents." I used Get Info on the folder and changed Sharing and Permissions to Read and Write, but still no access.
What can I do, if anything to gain access to that folder?

http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2968.html

Accidentally deleted bonjour from my computer. iTunes will not open. Help Please.

Accidentally deleted Bonjour from my computer. iTunes will not open. Running Windows XP. Help please.

Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
For the reinstall, use an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
... or you could get it back via your Apple Software Update for Windows.
If you'd prefer not to uninstall iTunes, try the following procedure.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

0HR_PY_1_CE - Delta init with time limitations

Hallo everyone,
I want to use the Content-Extractor 0HR_PY_1_CE to transfer payroll data into SAP BW in delta mode.
As the source system is running payrolls for a very long time allready, I would like limit the data by time. Pittily the extractor does not support filtering by time in delta mode. (Found this on SAPs help pages and also tried to set start and enddate ... no luck as assumed.)
So I had a look at the source systems customizing, but the only setting regarding a time frame for extraction I found is the one for PT-data. (Transaction SBIW -> Settings for Application-Specific DataSources (PI) -> Human Resources -> Define Time Frame for Transfer)
Within the PY-Customizing there is no option to limit the extraction interval.
Is there any other way to limit the extraction to a specific time frame when loading data via 0HR_PY_1_CE?
Thanks a lot in advance and regards
Chris
Edited by: Christian Baum on Jul 27, 2010 12:15 PM

Hi Yuvaraaj,
thanks for taking the time to answer my question.
For time selection I use the extractors default datafields: BEGDA and ENDDA.
Pseudo-delta might be an option IF the two fields you mention are processed in the extractors selection logic. I actually don't know and would need to take a closer look on the extractors programm logic.
Anyway my goal is to stay as close to SAPs standard as possible.
Pittily the extractor does not support filtering by time in delta mode. (Found this on SAPs help pages and also tried to set start and enddate ... no luck as assumed.)
I had another look at [SAPs documentation for 0HR_PY_1_CE|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/6a/cccc6015484464b25605375a5db965/content.htm] and have to recall the statement above.
As there is no restriction mentioned about delta and time selection there must be a way to pass a time frame when initializing the delta.
I tried the following:
1. I startet an Infopackage in full mode with the follwing filter criteria: BEGDA = 01.10.2009; ENDDA = 31.10.2009
The extractor dilivers ~60000 records; their inper is allways 10.2009. -> Selection worls fine
2. I started an Infopackage in delta init mode and exactly the same selection criteria as the full mode Infopackage and i receive millions of records whichs inper is spread over several years.
So the time selection is definitely not working in delta mode.
Are there any customizing settings I missed in the OLTP system?
Regards
Chris

I just accidentally deleted a video on my iphone 5... Is there a chance I can get it back? If so how?

I just accidentally deleted a video on my iphone 5... Is there a chance I can get it back? If so how?

If you backed up the phone when the video was still on it, restoring the backup will get it back. However, anything new on the phone since the backup will be deleted.
iOS: How to back up and restore your content

Delta init accidentally deleted (urgent)

Similar Messages

Maybe you are looking for