Delta initialisation removed in PSA, DSO can't activate in process chain.

Hi all,
i have removed delta initialisation request in the PSA area, DSO still contains the delta initialisation request in them, during process chain DSO activation process, it fails to activate the delta load and complains about the missing delta initialisation from PSA area (again DSO has the correct data and delta initialisation load), the delta changes are loaded correct into DSO objects, only failed during activation.
PSA is only temporary area, if it is loaded into DSO correctly, what is PSA can be made redundant, isn't this true? right now, i need to manually repeat the activation process to keep the process chain to run again.
i realise i can just re-initialise these data streams again, but don't wanna do it unless there is absolutely no other alternatives.
Regards,
Joe

Hi all,
In case any one out there is encountering the similar problem, I raised an OSS message, SAP came back with proposed solution:
Implement Note 984242, I am on BI 7.0 SP9 with a number of corrections implemented, and this works for me.
cheers.

Similar Messages

  • Adding mail ids & Removing mail ids from the last step of process chain

    Hi
    Can you please guied me how to do this.
    Adding mail ids & Removing mail ids from the last step of process chain.
    Thanks
    Subbu

    You can refer the following thread.
    email alert for process chain
    Still I would suggest to search the forum. There will be many threads and articles on this which can help you out.

  • Can we stop the process chain in middle of the process ?

    hi experts,
        Can we stop the process chain in middle of the process after scheduled.
        my process chain is like  start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
    if it is possible what are the steps we fallow pl give me step by step procedure.
    thanks & regards.
    venkat

    stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
    for restarting, have a look at this blog.
    Restarting Processchains
    there he explains how to restart a stopped process chain.
    Raghav

  • Why can't we change and activate a process chain while it is running?

    why can't we change and activate a process chain while it is running?

    Hi.........
    Yes u can activate the changed PC...............but don't schedule it...........
    If u schedule the Chain............when the current chain is running..............it will get stucked in the process..............which was executing ........at the time when it was scheduled.............
    I thnk u hav made some chainges in the PC in Planning mode.............right...............Activate it............after the completion of the current run of the chain............schedule the chain........
    Regards,
    Debjani.........

  • How can we set a process chain to trigger the nodes w/o manual intervention

    SDNers,
    We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
    My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

    Hi ravi,
    i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
    for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
    it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
    fine...
    b4 to this make sure that there is no dependency for the previous loads....
    And now the solution i found for this is in the process chain design itself.......
    while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
    rgds,
    nkr.

  • How can u know the process chain total time, individual time?

    Hi guru's
    How can u know the process chain total time, individual time?
    and what options will available in sm37?
    Thanks
    prabha reddy

    Hi Prabha
    Iam not very sure about total time and individual times.
    But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status  2.start date & time  3. Log ID  of each process chain.
    or you can go to log view of particular individual chain to know how long it has run.
    SM37: tcode for simple job selection.
    here you check the status of job.
    you can select for certain conditions like
    1. scheduled
    2. released
    3. ready
    4.active
    5. cancelled
    Assign points if it was helpful
    Revert back if you need further info/
    regards
    AP

  • How can we delete a process chain?

    Dear Ones,
    By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
    Thanks,
    Raj

    Hi Bhanu,
    I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
    Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
    Thanks in advance...
    Amarnath.

  • DSO cannot be activated when process chain is launched from BPC

    Hello,
    we are facing the following issue in our project: we have created a process chain that loads transactional data into a DSO and then a BW cube. From there we will be launching the data into BPC.
    The process chain that we have built is working and loading OK when this chain is launched from the RSPC trx. However, when launched via the datapakage "Execute Process Chain in BW" data are loading OK from the source system up to the DSO, but the activation does not take place.
    The error that we are getting on the BPC data package is:"An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was neither handled locally, nor declared in a RAISING clause
    Call of the method IF_RSPC_GET_PARALLELIZATION is SINCHRONOUS of the class CL_RSPC_CHAIN failed; the obligatory parameter I_VARIANT has not been filled."
    Has anyone faced this issue before? could you please help on this topic? I have tried several options and all of them are pointing to the parameter I_VARIANT.
    Thanks in advance.
    Kind regards,
    Begonia

    Hi Reddy,
    I've deleted deltas load from DOS, then I launched and activated a repair full load from ECC, it worked well.
    After that I went for delta load so the load was OK but the activation failed.
    The message 'Type of data update' was: Repeat of the last delta and the Nº of Transferred and Added was zero.
    ¿Do you think I could solve the problem if I do a repair full load from ECC then I delete the Delta init and create a new Delta init?
    Any another idea?
    In conclusion I'm not yet solved the problem so advices are welcome.
    Regards,
    Jorge

  • DSO activation step has been failing if i activate from process chain

    Hello Frnds,
    one of the DSO activation step is failing from process chain.
    Problem : if i do the activation from PC then only it is failing
    If i do the DSO activation manually then it is fine .
    Kindly provide your suggestions on this issue.
    Thanks & regards
    Ravi

    Hello Lavanya,
    below are the logs for ur reference & process monitor is not genereated
    log from Process Tab:
    Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZXXXX
    Activation of M records from DataStore object ZOGSDRCA terminated
    Job log:
    Job started
    Step 001 started (program RSPROCESS, variant &0000000015318, user ID ALEREMOTE)
    Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
    Activation of M records from DataStore object ZOGSDRCA terminated
    Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
    Activation of M records from DataStore object ZOGSDRCA terminated
    Entire chain now has status 'A'
    Process Activate DataStore Object Data, variant Activate Data ZOGSDREC has status Undefined (instance )
    Process Generate Index, variant Generated from DROPINDEX ZDELETEREC_CAUSE_INDEX has status Undefined (instance )
    Process Generate Index, variant Generated from DROPINDEX DELETE_INDEX_ZCGSDREC has status Undefined (instance )
    Process Data Transfer Process, variant ZOGSDREC -> ZCGSDREC has status Undefined (instance )
    Process Data Transfer Process, variant ZOGSDRCA -> ZCGSDRCA has status Undefined (instance )
    Process Delete Index, variant Delete Reclamation causes' index has status Undefined (instance )
    Process Delete Index, variant Delete index of ZCGSDREC Reclamations has status Undefined (instance )
    Process Start Process, variant Start Reclamation delta load has status Completed (instance 4EQ978RV7JE1BU3MT2YB20A3X)
    Process Execute InfoPackage, variant 2LIS_05_Q0NOTIF Delta has status Successfully completed (instance REQU_4EQTTCCMY2XEEPL99XGE9EECT)
    Process Execute InfoPackage, variant 2LIS_05_Q0CAUSE Delta has status Successfully completed (instance REQU_4EQG4DHZ6JD3K5UZCR5WP16P9)
    Process Data Transfer Process, variant 2LIS_05_Q0NOTIF / EQ2CLNT210 -> ZOGSDREC has status Undefined (instance DTPR_4EQ97CM4OU8SN3TPQ44G2ZMZX)
    Process Generate Index, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Successfully completed (instance INDX_4EQ97IDIWSIXM0EU3NVNMGOBX)
    Process Activate DataStore Object Data, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Ended with errors (instance ODSA_4EQG4KJGK99HMTOSPBB5WU0BX)
    Job finished
    Here i am giving process types sequence :
    Infopackage -> Create index-> DSO activation.
    does this create index is generating any issues ?
    Regards
    Ravi
    Edited by: BIuser on Aug 10, 2009 1:13 PM
    Edited by: BIuser on Aug 10, 2009 1:13 PM

  • PSA to Multiple Data Targets in process chain

    Hello All,
    I am trying to create a process chain that loads data from an already loaded PSA to further targets. (Note that the infopackage to load from R/3 to PSA is in another process chain). I am using the "Read PSA and Update Data Target" process type. But it allows only one data target. I need to push the data to all the targets of that infosource. Do I have to put a process for each target? Or is there a work around? Please help.
    Thank you,
    Rinni.

    Hi Hemant,
    Thank you for your detailed answer. I know that it is mostly not practical to have the InfoPackage and "Read from PSA" package in different local chains. However I am facing a situation where I need to create a chain that just extracts all the data from R/3 and loads it till PSA in BW (This is very time critical, so we do not wish to put any other processing in this chain). And in the second chain, we want to put further processing steps within BW. That is the reason, loading from PSA to ODS needs to be in a separate chain.
    Another thing is the variant does have a field to enter Data Target, and that shows only the targets of InfoPackage, but allows me to select only one. However, I will go ahead and try with the Infopkg entry as you suggested.
    But if you could just elaborate on why you said, I CANNOT have PSA to Targets in a separate chain, I would really appreciate it!
    Thanks again,
    it was a big help!!

  • How can i understand the Process Chain management in real time!!!

    Hi,
    now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
    thanks,
    stikanth.ch

    Hi,
    A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
    (from "Mastering the SAP BIW")
    New Features in BI 2004s Process Chains
    /people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
    Designing
    /people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
    Process chain creation in 2004s - step by step
    /people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    process chain issues or errors
    Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
    Hope this helps.
    Thanks,
    JituK

  • How can i end the Process chain based on some condition

    HI All,
    I have a scenario where i have a main pc chain which call  the  new chain at the end which in turn again call pc1. So its more like a closed loop .
    pc1-->pc2->pc1
    What main chain does is it reads some field value from a dso and assign that to some variable and set some flag to identify that value has been used. My second chain just run the report using the same variables assign by first chain. Now i have to design the main chain such that when all the values have been read from the dso, it should exit and should not trigger 2nd chain. How can i achieve this scenario.
    Thanks
    Prashant

    Hi,
    For this try using Process Type-"Decision between multiple Alternatives" in your main chain.It helps you the set condieion based on some formulas
    Pls refer links
    Decision Between Multiple Alternatives
    thanks
    nilesh
    Edited by: npathak on Aug 11, 2010 1:16 PM

  • Data can not be loaded into PSA iva process chain

    dear guru,
    the process chain is very simple: datasource(mster data, full)--->PAS
    shedule : start at 10:00 AM, hourly
    when i run sm50, i can find the job is released. but when i checked in PSA, nothing found.
    why?
    thanks.
    brgds/steve

    Hi,
    If u want u can run only the load manually by displlay variant and schedule...
    But to test the chain, as it is a full load can u run the process chain again...it may work fine....
    May be the old job might not have scheduled corectly, may be still in released state once the job come into active it'll be fine...
    But still try to run again the chain once and revert..
    rgds,
    Edited by: Krishna Rao on Apr 15, 2009 12:40 PM

  • Init and delta uploads using process chain

    Hi,
        I have a scenario where for the first upload i use init upload for that i have an infopackage now for the subsequent uploads i.e delta upload i get the option for the same only once i have run the init upload.
           so the doubt is can i use a process chain defined to carry out the whole task?????
    Regards

    Hi Virat,
    AS init is a one time activity, so what you can do is.
    1> set the init in infopack and run the process chain.
    2> remove the infopack and then include a new infopack with delta option or change the existing infopack to delta option.
    3> schedule the infopack.
    whatever you are expecting is not possible.
    Hope I answered your question.
    THanks and Regards,
    Suneel

  • How to load delta to 2 target ODS 's from a single ODS using process chains

    Hi BW Gurus
    I am having a current ODS based on 2LIS_02_SCL, deltas also are working fine for it.
    our  requirement was based to have 2 target ODS on this existing ODS by using export generate datasource.
    I have to build a process chain that should enable us to load delta in our target ODS.
    Earlier manually for DEV purposes ,i was using the Update data into data targets from the source ODS, this was enabling us to load deltas. But to automate this process we will require a process chain.
    Finally , is there any process type in process chain for " Export generate Datasource".
    please suggest a good methodology for this scenario.
    Thanks in advance.

    Hi Ashfaq,
       Loading from ODS to CUBE is same as loading from datasource to ODS only.
    1. Create export datasource.
    2. Create update rules from ODS(export datasouce) to CUBE.
    3. Create infopackages(if you dont want to use generated once).
    4. include infopackage in process chain to load fromODS to CUBE.
        Intialize first manually and change settings in process chain infopackage to "Delta".
    5. You can append/enhance existing process chain(loading from datasource to ODS).
    Hope it Helps
    Srini

Maybe you are looking for