Delta is not capturing in DSO

Hi all,
I done init in DSO to CUBE successfully with 4861 records
using with genric delta, for delta run...i was loaded in to DSO
& CUBE but got same records as init 4861 but i was found in
14000 records in RSA7 delta queue in R/3 side but how amazing delta records r not capturing into BI...
even i tried 3 times ..result was same...
plz give me solution....its urgent
thanks
pinky reddy

Hi,
As Raj said, chk the infopack settings for delta.
is the load successful to cube? hope the record count wil be the same as first load.that may confirm init is done again.
ODS will not accept the second init.
have you loaded ur delta through process chain/manually?
try changing the update type to delta.
Ramesh

Similar Messages

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

How to check that Delta is not captured?

Dear Experts,
I am using 2LIS_02_ITM datasource.
PO is created using a program.
The next step in the program, it can change a field in the PO depending on logic, using a abap command 'update'.
Sometimes, this change is not captured in the delta queue, it seems.
why i say this is the PO shows the field value but BI delta load does not.
It is using Queued Delta now.
Initially, the program uses a command 'update' to update the field in PO.
Now, we decided to use ME22N program to ensure delta will be created.
The problem is happening to some records and not all delta records.
Its very difficult to tell what is the cause.
What is the standard method to check that Application table data is not captured in Delta Queue by the extractor?
Or
If PO can show the field value, is there a possibility that Delta may not capture this field change?
regards
Pascal

Well just throwing few possibilities:
1 - Basically PO creation, change in values/quantities etc are Business transactions and they generate evens known as BTEs.
Now we have to explicitly inform SAP ECC that which applications can use BTEs and we do this by tcode BF11.
Check if the software component creating and changing POs is properly linked to BTEs and if BW is set as active in BF11 tcode.
2 - If point 1 is checked and nothing is found to be incorrect, please check if Industry sector is correctly chosen (SBIW). Industry sector generates a set of Transaction keys (BWVORG) without which the values are not updated in BW.
Also rightly pointed by Tbollo, you need to ensure that there's a pattern in the missing docs to identify the rootcause.
Debanshu

Deltas are not capturing for the enchanced field

Hi Friends,
We have enchanced 2LIS_11_VAITM datasource with custom field called customer requested date.
For initial setup i can see the data for this field in BI. But when user changes the customer requested date then this is capturing in deltas.
can any one know the reason behind this.
But when i run set tables for the particula Sales document number i can see the data for this field.
<removed by moderator>.
Best Regards,
Reddy.
Edited by: Siegfried Szameitat on Dec 23, 2008 4:38 PM

Hi,
when u replicated those fields are appering in bw side? if not by default the enhanced fields in hide condition for that fields data will not come ,if it is the case go to the RSA6 and select ur datasource and go to the change mode and deselect the hide check box in extraction structure of datasource and do the activation and do the replication in bw side
if the fields are came in bw side then u check in transferstructure either the fields assigned to correct infoobjects or not then check the update rules either those fields assignd or not.
Thanks & regards
k.sathish

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Sales Doc Overall status not updating in DSO

Hi All,
In ECC status of the Sales Document has changed from B to C. However in the DSO status still shows as C. Delta has pushed through successfully. Please see the screenshot below. Why is the status not changing in DSO?
How to handle this issue?
Regards,
DTD

Dear Dhanuka
If the sale order item is the key field and the status is in the data field in the DSO you will not have an issue in the cube.
Please find the example below
1. DSO - Sales order X1 / 10 overall status B   keyfigure 100
2. Cube - Sales order X1 / 10 overall status B   keyfigure 100
After the Full DTP - Overall status will be overwritten in DSO
3. DSO - Sales order X1 / 10 overall status C   keyfigure 100
4. Cube - Sales order X1 / 10 overall status B   keyfigure 100
5. Cube - Sales order X1 / 10 overall status B   keyfigure -100
6. Cube - Sales order X1 / 10 overall status C   keyfigure   100
Regards
Gajesh

Testing Delta Consistency for write-optimized DSO

Hi,
Please do let me know how to carry testing for delta consistency for write-optimized DSO.
Is it just to check whether the check box under the settings.. "Check Delta Consistency " is checked or the other way.
Please do let me know.
Thanks & Regards,
Lavanya.

Hi,
The delta consistency flag for W-O DSO is used to ensure data consistency between the w-o DSO and any target propagated to. zfor example, you have dataflow ZWDSO1 -> zsdso1. ZWDSO1 has the flag 'check delta consistency' set to ON. You load data from ZWDSO1 to ZSDSO1 via request 1.
When the load is successful, if you try to delete the request 1 from ZWDSO1, deletion should not be possible; also you will not be able to change the flag to OFF as delta has already been propagated, and if you change the flag, delta consistency might be lost!
Now, if you delete request 1 from ZSDSO1 and then try to delete request 1 from ZWDSO1, deletion should be possible.
Hope the explanation helps!
Regards,
Rakesh

Change Delta load to Full in DSO

Is it possible to change Delta load to Full in DSO without recreate it?
Thanks!

Our data comes from other system not R/3. We chose Delta when designed this DSO. But I thought Full load will make validation easier.
I am testing two Update Options in DTP of this DSO. The options are:
1. Further Processing Without Master Data
2. No Further Processing Without Master Data
I had one testing data contain a ITEM NO that doesn't exist in the Master data. I expect to see 0 gets loaded when number 2 option selected. (This worked)
Also I expect to see 1 records get updated to the DSO when Option 1 is chosen. (I still load 0).
Our business people wants to know what are those ITEMs that do not exist in the Master data. Any ideas? Thank you.

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Multiprovider is not capturing some fields data

Hi Friends,
               I got a proble when iam working on multiprovider,where i have taken two cubes into that multiprovider,now the problem is when i execute a report on muliprovider some fields are not populating with data.
{{cube are :billing cube(data sources:2lis_11_vaitm&2lis_13_vditm)
              account receivable item data(0fi_ar_4)}}
                       As this is RRI sender query having both cubes information,when i execute report when ever report captures first cube report the second cube data is not capturing vice versa.
Thanks and Regards
Gunasekhar

Could be a problem on identification (setting on multiprovider).
Try to execute on transaction RSRT your query
execute + debug
on debug option set "Multiprovider explain"
and report the log in this post.

Excise Duty is not captured in MIRO

Dear,
When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
Please give us solution.
Br,
Swapnil

hi,
have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
Regards,
mukesh

Excise is not captured in MIRO in Dealer Invoice

In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
Excise is not captured in MIRO.
Regards.,
Lakshmanan.S

In case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts.

Excise Duty not capturing in invoice

Dear all,
All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
Regards,
Raziq

Hi Raziq,
When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
In this system will show the Excise Duty and it will post the below accounting Entry:
BED Dr
eCess Dr
HECess Dr
CENVAT Clearing Account Cr
Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
Please let me know if you are following above approach or not.
Br,Vivek

BED is not capturing in the J1IIN

Dear Experts,
I have created commercial invoice ,in which i have entered only BED (Condition type JMAN) manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the excise invoice and entries also generating.
i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
So please help me to resolve the issue urgently
Shibu

Sir,
,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
Please give me help for resolving the isse
Shibu Chandran

Delta is not capturing in DSO

Similar Messages

Maybe you are looking for