Delta is not enabling

Hi expert's
I have DSO1 & DSO2.
DSO1 contains 6 years of data, I need to transfer only 3 yrs of data to DSO2 and delta records should be updated.
I am using DTP to load data between these 2 DSO's. (I am new to BI )
I tried by loading one full load with 3yrs selection(till date) and in next step I used set delta status : no data transfer option in DTP. But it was not successful.
pls guide me how to enable delta in this scenario.
regards,
rajesh.

Hi Rajesh,
The process you followed is correct, after the loading the 3 yrs data (full), just enable delta by using DTP with delta as extraction mode.
From the next load onwards, use the same DTP (Delta extraction mode), it will pick the new records.
Also check for Delta init method from in the extracion tab of the DTP.
Hope this helps...
Rgs,
Ravikanth

Similar Messages

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

Delta Option not enabled

Hi,
we are working on a new implementation and we have got a generic datasource from R3 we have assigned it to the corresponding infosource in Bw we have triggered the init delta with out data transfer and while we are trying to create a Delta package ,we are not able to see the Delta option in the update tab of the info package creation screen.
Fyi: this is first delta package we are creating in the development environment.
Do we have to enable any specific settings in BW for getting delta option.
Pls advise....

Hi Ram,
Check this:
How to create generic delta
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Initialization is successfull...??
Hope it Helps
Srini

In t.code sxi_cache,start delta cache refresh not enable

hi every one,
in my xi server in t.code sxi_cache,start delta cache refresh not enable.plz provied the solution....
with regards,
sai kiran

Hi kiran,
Check the below link it might help you
[http://help.sap.com/saphelp_nw04/helpdata/en/5e/f85141196ff423e10000000a155106/content.htm]
Regards,
Gokul B

Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
   Name: GeForce GTX 285
   Vendor: NVIDIA (Apple platform)
   Capability: 1.2
   Driver: 1
   Total Video Memory: 1024MB
   * Not enabled by default because it did not match the named list of cards.

found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Why is the 'Choose icon...' button in the Options tab of the field property dialog box not enabled?

I am using Adobe Acrobat Professional XI running on Windows 8.
This “feature” has been bugging me for some time now. I remember it happening when I used Acrobat 9 Professional (Windows XP) and it is still happening in Acrobat XI Professional. I think I figured out a situation when I can reproduce this “feature” conistently and I hope someone fixes this.
Try the following and see what happens:
1. Acrobat Professional is not open.
2. Launch Word and start editing a document (or some other authoring tool that can generete PDF document).
3. After editing the document, generate a PDF version of the document.
4. Launch Acrobat Professional and edit the PDF document generated in 3.
5. Add a button.
6. View the button's properties.
7. Change the Fill Color property in the Appearance tab to none.
8. Change the Layout in the Options tab to Icon only.
Now here is what bugs be. Shouldn’t the 'Choose Icon ...' button be enabled? It is not enabled after step 8. It is possible that 'Choose Icon ...' button is enabled for some of you. I this case, it would be nice if at least one of you who experience the same bug say so in this thread so that Adobe doesn't think I am sending them on a wild goose chase.
I can enable it by selecting a different tab and then returning to the Options tab. A similar thing happens when reverting back from 'Icon only' to 'Label only' but I am not sure how to reconstruct a scenario for this one.
Here is the dialog box for one instance when I noticed the bug.
Regards,
John

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

BitLocker not Enabled on HP ElitePad 1000 G2

I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
 Size: 115.58 GB
 BitLocker Version: 2.0
 Conversion Status: Used Space Only Encrypted
 Percentage Encrypted: 100.0%
 Encryption Method: AES 128
 Protection Status: Protection Off
 Lock Status: Unlocked
 Identification Field: Unknown
 Key Protectors:
 TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?

after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

Drill by is not enabled in BO 4.0 WebI report

Hi,
In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
Thanks in advance
Lavanya

Hai
Enable drill mode right in BOE 4.0
http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
Thank u

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

Why firefox 3.6 downloads all of the files again after restartarting the browser from a website if the "clear history when Firefox closed" is not Enabled?

We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
Could you advise please how to use the local cache either after browser restart?
Thank you!
Chris

Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :)

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

Remote Desktop Connection - cannot proceed because authentication is not enabled

Hello,
I try to connect via RDP from a Windows Server 2008 R2 to another 2008 R2 Server.
I always get the error message.
The connection cannot proceed because authentication is not enabled and the remote computer requires than authentication be enabled to connect.
On the target machine the Remote Settings are set to:
Allow connections from computers running any version of Remote Desktop.
Firewall is disabled on both servers.
Therefor I do not understand why I get an error message, that authentication is required.
The target box is a nearly fresh syspreped machine with all current Hotfixes installed.
I already found a lot of people having that problem by using XP (old RDP client), but no one seems to have this problem when connecting from 2008 R2 to 2008 R2.
Thank you very much in advance for every hint.
BR
Matthias

Hi Matthias,
First I would like to confirm if you have deployed RDS (Remote Desktop Services) and you got the error, if so, please check this option
TS Configuration, >> RDP-Tcp Properties >> change the Security Layer to "Negotiate"
Then Recycle the TS Gateway service.
Refer to:
Unable to connect to Server using the Remote Web Workplace (RWW) Small Business Server 2008
If this issue has nothing to do with RDS, and I suppose you used the cmd "mstsc" to remote access. This issue may also occur because of the version of mstsc, please make sure it has been upgraded to the new version.
In addition, Did you have another newer server available like Server 2012? So we can test and try to use Server 2012 to remote access Server 2008 R2, and check if the issue persists.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

Delta is not enabling

Similar Messages

Maybe you are looking for