Delta links on applying patches/upgrade.

Hi,
I have a basic question. What happens on applying patch/upgrade to the delta linked copies, when the source objects have been updated/upgraded with new SAP changes.
Will the delta linked object properties get over written by new upgraded (or SAP patches) source objects.
I have made delta links of the SAP delivered WPC IView container objects and using them in the custom pages. Lets say on applying a patch or upgrade, the orginal source objects are changed. Will those changes undo my changes on target delta linked objects.

Hi,
Copying to your namespace is possible but by that you loose all the advantages in the delta-link.
What exactly are you copying Roles, iView, Pages everything?
Adding additional delta link layer between the roles and SAP content is a wise step but copying everything will only dupplicate content and will not allow you upgrade safty with SAP features.
Regards, Elisha
PCD Team Leader
SAP

Similar Messages

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

11i-R12 upgrade: when to apply patch 8919489

I am performing an 11.5.10.2 -> R12.1.1 upgrade on Linux-x86 using the Maint Wizard (MW).
MOS ID 437878.1 says to apply patch 8919489 (R12.TXK.B.Delta.3) BEFORE applying the bundle forms patch 9593176 (and any missing patches) as part of the OAS 10.1.2.3 upgrade.
The MW has patch 8919489 being applied AFTER the OAS 10.1.2.3 upgrade patches (done in MOS 437878.1) and after the main 12.1.1 upgrade patch (u6678700.drv).
Does it matter when this patch is applied?
Thanks

I suppose that I should clarify.
- The MW says to follow MOS 437878.1 BEFORE starting the primary upgrade patch
- MOS 437878.1 says to apply patch 8919489 as a pre-req patch
- The MW says to apply patch 8919489 after the primary upgrade patch
So, is it to be applied along with the other 437878.1 patches or after the primary upgrade patch?
I don't know where MOS 437878.1 is referenced as part of the 11i-R12 upgrade outside of the MW.
Thanks

Error while applying patch u4440000.drv(part of R12 upgrade from 11.5.10.2)

Hi All,
Getting error while applying patch 4440000
cd $AU_TOP/patch/115/driver/u4440000.drv
ERROR:
Failed: XDOLoader.class on worker 1
Failed: CustMigrationTool.class on worker 2
Failed: XDOLoader.class on worker 3
Failed: XDOLoader.class on worker 4
Worker 2 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Worker 1 log file:_
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 3 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 4 log file:_
Start time for file is: Tue Jun 23 2009 00:14:01
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:02
Please let me know any solution
Thanks in advance
Regards,
Bhanu Chander.

Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander

UPGRADING,DOWNGRADING,APPLYING PATCH 적용시 _SYSTEM_TRIG_ENABLED=FALSE

제품 : ORACLE SERVER
작성날짜 : 2004-03-09
UPGRADING,DOWNGRADING,APPLYING PATCH 적용시 SYSTEMTRIG_ENABLED=FALSE
=======================================================================
PURPOSE
Upgrading / Downgrading / Installing / Deinstalling 시 중요한 순서로
SYSTEMTRIG_ENABLED PARAMETER 설명
EXPLAIN
Upgrading / Downgrading / Installing / Deinstalling 시 중요한 절차
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Versions & Platforms 영향
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
o 이 정보는 모든 플랫폼의 Oracle 8i (or 9i)에서 적용된다.
o Oracle8i or 9i release 로 upgraded / migrated 하는 경우가 아니라면 Oracle 8.0 , Oracle 7 의 경우에는 적용할 필요가 없다..
Description
~~~~~~~~~~~
o Parch set install 시
o Upgrading 시
o Downgrading 시
o 운영중에 catalog or catproc 실행
o Java (initjvm) Installing 시
o SYS owner 의 object 의 수정이 일어나는 script를 실행시
위의 경우 hidden init.ora parameter SYSTEMTRIG_ENABLED를 FALSE로 setting 해야한다.
Eg:Oracle8i에서는 init.ora file에 다음의 line을 추가후 db를 stop, start 하면 됩니다.
# Disable system triggers for the duration of the maintenance
# operation.
SYSTEMTRIG_ENABLED=FALSE
IMPORTANT: 이 parameter는 위의 작업이 끝난후 true 로 다시 설정시에는 comment처리 하세요.(default 가 true 입니다.)
Oracle9i
~~~~~~~~
Oracle9i 에서는 필요시 SYSTEMTRIG_ENABLED를 false로 dynamically setting 이 가능하다.
ALTER SYSTEM SET "_system_trig_enabled"=FALSE;
ALTER SYSTEM SET "_system_trig_enabled"=TRUE;
SPFILE이 아닌 경우에는 oracle 8i와 동일하게 setting 하면 된다.
Oracle8.0 / Oracle7
~~~~~~~~~~~~~~~~~~~
SYSTEMTRIG_ENABLED parameter 는 oracle 8.0 이전 version에는 존재하지 않는다.
Explanation
~~~~~~~~~~~
SYSTEMTRIG_ENABLED 란 무엇인가 ?
System trigger는 Oracle 8.1의 new feature다.
SYSTEMTRIG_ENABLED를 TRUE (the default)로 setting 하면 system triggers가 enable 된다.
이값이 FALSE라면 system trigger 를 stop 한다
False 로 setting 하는 이유?
trigger에 의존하는 object가 invalid나 drop될수있는 dictionary 작업의 script가 실행되는 경우 해당
trigger는 fail이되고 이 script는 정상적으로 실행이 안되게 된다.
다음의 몇몇 예를 보자.
Example Problem Scenarios
~~~~~~~~~~~~~~~~~~~~~~~~~
Dictionary maintenance operations를 수행중에 system triggers들이 있다면 많은 문제들이 있을수 있다.
가장 일반적인 경우를 다음에 설명 했다.
After running "rmjvm"
~~~~~~~~~~~~~~~~~~~~~
만일 JIS install 되어 있고 "rmjvm" 를 사용하여 java를 deinstall 하고
후속적인 조치로 "DROP a ROLE "을 시도할때 error 가 날것이다.
이것은 <Bug:1751857> 와 관련있으며 "rmjvm" 은 모든 java와 관련한 objects drop을 할수 없다.
eg:
SVRMGR> drop role a;
drop role a
ORA-00604: error occurred at recursive SQL level 1
ORA-29540: class oracle/aurora/mts/http/security/RdbmsHttpPolicy does nt
ORA-06512: at "SYS.HTTP_SECURITY_CASCADE", line 0
ORA-06512: at line 3
Running CATALOG / CATPROC
~~~~~~~~~~~~~~~~~~~~~~~~~
만일 JIS install 되어 있고 CATALOG와 CATPROC 를 다시 실행하려고 하면 trigger 가 INVALID 된다.
이는 많은 DROP SYNONYM 에서 error 를 일으킬 것이고 <Bug:1733297>에 설명이 되어 있다.
eg:
SVRMGR> drop public synonym dba_segments;
ORA-4098: trigger 'SYS.JIS$ROLE_TRIGGER$' is invalid and failed re-valin
8.0에서 upgrading 이나 7.3 에서 migrating 할때.....
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
만일 SYSTEMTRIG_ENABLED이 FALSE로 setting 되어 있지 않으면
package STANDARD에서 ORA-604 , ORA-6553 , PLS-213 를 일으키는 <Bug:1362374>를 만나게 될것이다.
이는 Oracle8i/9i에서 db open시에 error 를 일으킨다.
만일 ODMA (Database Migration Assistant)를 사용하여 Oracle7 or 8.0 로 부터 upgrade 한다면
SYSTEMTRIG_ENABLED를 setting 하는 것은 불가능 하다.
ODMA를 사용하여 성공적으로 upgrade / migration 가 가능한지 확인하고 그렇지 않다면 parameter 를 false 로 setting 후에
수동으로 upgrade / migration을 하도록 한다.
Oracle9i로 Upgrading
~~~~~~~~~~~~~~
SYSTEMTRIG_ENABLED를 FALSE로 setting 하지 않으면 Oracle9i에서 db open시
ORA-600 [16201] errors를 만날수 있다 <Bug:1747065>
Reference Documents
<Note:149948.1> <Note:68636.1>

Helios,
Looks like I should not apply this patch, it assume the version of 11.2.0.2, I am on 11.2.0.1.
What took me off a little was this statement me in the BUG:12317756 - DBCONSOLE PERFORMANCE PAGE NO LONGER DISPLAYS ON LINUX
"it used to work in previous versions including 11.2.0.1"
and this is not true for me - I have 11.2.0.1. and it is not working - the graph can not be displayed.
So I guess I am back to the original question I was asking about in my other post. Let me see if other 2 Notes you provided will take me to any other patch
Thank you
Anatoliy

Apply patch during oracle upgrade

Hi Folks
I`m upgrading 10G databases to 11.2.0.3. Right now we have installed the 11.2.0.3 software on the severs. We have downloaded PSU, which converts present 11.2.0.3.0 to 11.2.0.3.3.
Here`s my question.
The pre-requisite to apply this patch is that opatch version of db has to be in 11.2.0.3.
I checked my opatch version in some 10G databases, it is with 10.2.0.4.0. How can I apply new patch as my patch version is only 10.2.0.4.0.
New environment variables will be set to 11.2.0.3 during applying patch. But how to convert 10.2.0.4.0 patch to 11.2.0.3.0, so that I can apply my new patch.

You will need to install the latest version of OPatch on the 11.2.0.3 OH, then apply the PSU - see MOS Doc referenced above
HTH
Srini

MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade

DB:11.2.0.3.0
OS: IBM AIX Power system 64 bits 6.1
Hi All,
MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade. We are upgrading from 11.5.10.2.0 to 12.1.1
Could anyone please share why the script takes so much of time to run?
Thanks for your time
Regards,a1_win

As per Mscobjcl.Sql Is Running Long While Applying Patch.8671960 (Doc ID 1295881.1)
The patch is already applied in the instance
BUG_NUMBER CREATION_DATE
8671960 19-SEP-10
Thanks,
a1_win

Urgent help needed while applying patch for upgrade with conflicts

I try to upgrade 11.2.0.2 to 11.2.0.3 on LInux environment.
I have to apply patch P1253900 before the upgrade per oracle doc.
however I got following conflict:
Verifying environment and performing prerequisite checks...
Checking skip_duplicate
Checking skip_subset
Conflicts/Supersets for each patch are:
Patch : 12539000
Conflict with 12827726
Conflict details:
/u01/app/grid/product/11.2.0/grid/lib/libserver11.a:/ksxp.o
Following patches have conflicts: [ 12827726 12539000 ]
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
I checked above oracle note, and did not say any resolution.
If anybody had the same issue before, please help me with the resolution.
Thanks in advance.

Follow the steps in this MOS Doc
Database Patch conflict resolution [ID 1321267.1]
This MOS Doc is referenced in 1299688.1
HTH
Srini

Error While Applying patch 9239089 Oracle Applications DBA 12.1.3 Product R

Dear All,
I want to upgrade my application from Release 12.1.1 To 12.1.3. on windows server 2003 R2.
while applying patch 9239089 I got this error
"Extracting object modules for product ad...
lib: not found
adlibout: error: cannot get table of contents in library file for product ad
File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
Skipping to next product...
Please see the complete contents from log file.
You are running adlibout, version 120.0
Start of adlibout session
Date/time is Sun May 8 17:02:50 AST 2011
Log file is D:/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adlibout.log
Command line arguments are
"filelist=D:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/paoapp000.txt"
Creating temporary file list...
Done creating temporary file.
---ad----------------------------------------
Extracting object modules for product ad...
lib: not found
adlibout: error: cannot get table of contents in library file for product ad
File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
Skipping to next product...
End of adlibout session
Date/time is Sun May 8 17:02:50 AST 2011
Please Advise how to solve this issue.
Thanks and regards

lib: not foundPlease see these docs.
Error when relinking programs LINK : fatal error LNK1104: cannot open file [ID 1308860.1]
Patch 4157177 Error: Cannot Get Table Of Contents In Library File For Product Fnd [ID 335488.1]
Adcfgclone Appstier Error Out In Adlnk806.Sh [ID 601788.1]
Thanks,
Hussein

Error While Applying patch ST-PI 2008_1_700 to solution Manager

Dear Techies,
Thanks alot for your fast response.
We are trying to upgrade Solution Manager Stack from
ST-PI 2005_1_700 to ST-PI 2008_1_700 ,
While applying patch it was suddenly stopped with an error
"Manual modification adjustment is neccessary"
While I tried to adjust it.
In Note correction tree. This the message with " green tick"
"0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
and is not allowing me to proceed further.
How to go about.
Thanks in advance.
regards,
Kiran

Hi Varun,
Thanks for your reply.
As suggested by you, I executed "RTCCTOOL" programme.
It Has given that 4 notes were in red status.
They are.
        1. [Note 69455 ]      Addon upgrade ST-A/PI 01N_700SOL
        Description     "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10 (Addon delta upgrade package)
        Implementation From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI
                                 01N_700SOL. Upload to tx SAINT (just as you would do for an installation) and install as per note 69455
                                 Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
        4. [Note 539977 ]     ST-PI Support Packages
Description     Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for services]
Implementation Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via Maintenance optimizer. Upload from frontend int transaction SPAM, define a queue and import the queue.
        6. [Note 539977 ]     Note 1312413 for ST-PI
        Description     Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI
                               2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate
                              distribution.
         Implementation We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if
                                  not possible implement note 1312413   with not version >=12 using SNOTE. Regarding automatic maint.
                                  certificate distribution see http://service.sap.com/maintenancecertificate.
        9. [Note 1293326 ]    EWA serviceprep correct. in sequence.
Description     Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
                      RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
Implementation Implement the coding correction of this note 1293326   with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
These are in green status
Successfully implemented addons/ transports/ notes
        2. [Note 69455 ]    Proc. after addon impl.
        3. [Note 539977 ]   Addon ST-PI 2008_1_700
        5. [Note 539977 ]   Note 1300023 for ST-PI
        7. [Note 539977 ]   Note 1293657 for ST-PI
        8. [Note 12103 ]    Collectors and TCOLL.
While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
"Note 0000069455 cannot be implemented since no valid correction is available."
And is same for other notes also.
How to go ahead.
Thanks in advance.
Regards,
Kiran

How to apply patch 118833-36 on a containerized server?

We have a V890 running Solaris 10 that has two zones (containers) running instances
of Oracle database. `smpatch' won't install patch 118833-36 in the normal manner
because it's flagged as an interactive patch. The recommended procedure is to shut
the server down, boot it in single-user mode and then apply the patch this way:
# cd /var/sadm/spool
# smpatch add -i 118833-36
Then, you are supposed to shut it down again, do a reconfiguration boot, and finally
run smpatch again to apply the remaining patches.
Will this procedure work for a server with containers? I understand that the zones have
to be running for the patch upgrade to succeed. Is there a way to boot the zones into
single-user mode as well? We need to ensure that Oracle doesn't start during the
patch procedures.

Log into the global zone and run :
# shutdown -y -g0 -is
This should bring down the global zone to su mode and halt the other zones (notice Halt)
However I believe there is a bug presently where this does not always happen and you are still able to telnet to the local zones.
Local zone admin could always run zoneadm -z <zone-name> halt on each zone (notice halt not single-user).
Once global zone in in single-user mode install the patch as normal, when the global is done it will bring up each local zone to single-user mode to add the patch too.
118833-36 may need patch add and -G option as this patch also has been experiencing some issues, in which case I believe you would need to do the patch add process on each zone manually
Once the global zone is brought back up again it should bring up the local zones as well.
Let us know if you experience the locals not being halted as mentioned above and need to do it manually.

Error while applying Patch 4960210

Hi,
I am trying to integrate oracle apps with Oracle EBS 12R and following Doc Id:376811.1 from metalink.
I have successfully installed patch 5983637, but when I try to install patch 4960210 on it, even though I stopped all the services on app server, i get the following error:
Certain files which need to be reinstalled by oracle universal installer are being used by one or more applications.
Please close any running applications before continuing.
NOTE: when I upgraded the existing OracleAS 10.1.2.0.2 Infrastructure to Oracle Identity Management 10g (10.1.4.0.1) I created a new oracle home and installed my components there (unknowingly), so not sure if this causing problem.
Not able to go further Please help..!!!!
Thanks

Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander

Error while applying patch 3384350

Hi all,
I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
from adpatch.log:
The following Oracle Forms objects did not generate successfully:
inv forms/US INVTDILT.fmx
from worker log:
Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignored
I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
thanks in advance,
-Chad

Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution.

Error while applying patch no 9239089

Hello,
We are applying patch no 9239089 to EBS version 12.1.1 on WIndows 2003 R2 environment.
While applying the patch on the application user we are getting the following error (adrelink.log)
Starting link of product 'ad' on Wed May 22 16:23:16 IST 2013
Current product is ad
Current product TOP is $ADTOP
Current prodarea is D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0
Relinking module 'adadmin.exe' in product ad ...
gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
Starting link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
Done with link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
Relink of module "adadmin.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
What is causing this problem?
I ran: gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
and got the error:
This application has failed to start because libintl-8.ddl was not found. Re-instaaling the application may fix the problem.
Regards
Prasad

Hello,
The following is the error that I am getting while running adpatch on pacth number 9239089:
Relinking module 'adadmin.exe' in product ad ...
gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
Starting link of ad executable 'adadmin.exe' on Fri May 24 12:59:01 IST 2013
link.exe -MAP:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.new \
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adadmin.obj \
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
D:/oracle/VIS1/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk:804: recipe
for target 'D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe'
failed
gnumake: *** [D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe]
Error 157
Done with link of ad executable 'adadmin.exe' on Fri May 24 12:59:02 IST 2013
Relink of module "adadmin.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
This is happening of linking of other files.
Regards
Prasad

While applying patch 3653484, Relink of module "ar60desb" fails

Hi All,
While applying patch 3653484, Relink of module "ar60desb" fails
adrelink.log file entry
Starting link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
ld -s -H512 -T512 -bhalt:4 -brtl -L/erpbkp/oracle/tstora/8.0.6/lib
-L/usr/lib -o /erpbkp/oracle/tstappl/fnd/11.5.0/bin/ar60desb.new
/erpbkp/oracle/tstora/8.0.6/lib//s0main60.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/sslmdgtab.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xitsrw.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/xirpo.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/libpo.a
/erpbkp/oracle/tstappl/fa/11.5.0/lib/xirfa.o
/erpbkp/oracle/tstappl/fa/11.5.0/lib/libfa.a
/erpbkp/oracle/tstappl/ar/11.5.0/lib/xirar.o
/erpbkp/oracle/tstappl/ar/11.5.0/lib/libar.a
/erpbkp/oracle/tstappl/ff/11.5.0/lib/xirff.o
/erpbkp/oracle/tstappl/ff/11.5.0/lib/libff.a
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xirfnd.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/fdxsrw.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/libfnd.a
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecat.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecpf.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecty.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweats.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwepls.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxdsql.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweiap0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxsi.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/ui10.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/uiicxd.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsng.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwscl.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsdt.o -lrw60 -lgraphics60
-lobx60 -lge60 -locl60 -lnn60 -lrws60 -lde60 -lzrc60 -lrws60 -lnvu60
-lnvc60 -lnvs60 -lucol60 -luicc60 -lca60 -lmmiw60 -lmmov60 -lmma60
-lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -lvgs60 -luihx60 -luc60
-luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60
-luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60
-luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60
-lros60 -lrod60 -luat
60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib/libpsd.a -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib//libslax.a -lsql
/erpbkp/oracle/tstora/8.0.6/lib/nautab.o
/erpbkp/oracle/tstora/8.0.6/lib/naeet.o
/erpbkp/oracle/tstora/8.0.6/lib/naect.o
/erpbkp/oracle/tstora/8.0.6/lib/naedhs.o `cat
/erpbkp/oracle/tstora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr
-lnetv2 -lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lnetv2
-lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4
-lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lld -lm `cat
/erpbkp/oracle/tstora/8.0.6/lib/sysliblist` -lm
/erpbkp/oracle/tstora/8.0.6/rdbms/lib/kpudfo.o -lpthreads
-L/erpbkp/oracle/tstora/8.0.6/network/jre11/lib/aix/native_threads -ljava
-L/usr/lpp/X11/lib/R5 -lXm -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3
ld: 0706-010 The binder was killed by a signal: Killed
Check for binder messages or use local problem reporting procedures.
make: The error code from the last command is 254.
Stop.
Done with link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
Relink of module "ar60desb" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /erpbkp/oracle/tstappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Also, relinking modules ar60run, ar60runb, f60webmx, GLAMAS, GLAVAL, GLBAAC, GLBAAR, GLIDEL, GLIGEN, GLIXFR, GLLDEL, GLLEZL fails
Please suggest
Regards,
SK

Hi Hussein,
i was able to get rid of the relink error, as mentioned above
0706-010 Binder killed by signal Signal, was running out of some memory while linking object files...
continued with adpatch but facing
Failed: file FNDLOADSO on worker 1
worker log file entry:
Start time for file is: Wed Apr 29 2009 21:35:25
/erpbkp/oracle/tstappl/fnd/11.5.0/bin/FNDLOADSO &ui_apps UPLOAD &fullpath_fnd_patch/115/import_fndobjt.lct &fullpath_imc_patch/115/import/US_imc115ts.ldt
Uploading from the data file /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5), /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt) to staging tables
Dumping LCT file /erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5) into FND_SEED_STAGE_CONFIG
A database error occurred:
ORA-25153: Temporary Tablespace is Empty
The error occurred while executing the following statement:
INSERT INTO FND_SEED_STAGE_CONFIG (LCT_FILE, CONFIG_ID, ENTITY_NAME, STMT_TYPE, UPLOAD_STMT,GET_WHO_STMT, BIND_VAR_CNT, PK_VAR_CNT, ENTITY_METADATA, PROC_ID ,BIND_VAR0 ,BIND_VAR1 ,BIND_VAR2 ,BIND_VAR3 ,BIND_VAR4 ,BIND_VAR5 ,BIND_VAR6 ,BIND_VAR7 ,BIND_VAR8 ,BIND_VAR9 ,BIND_VAR10 ,BIND_VAR11 ,BIND_VAR12) VALUES( :lct_file, FND_SEED_STAGE_CONFIG_S.NextVal, :entity_name, :stmt_type, :upload_stmt, :get_who_stmt, :bind_var_cnt, :pk_var_cnt, :entity_metadata, :proc_id ,:bind_var0 ,:bind_var1 ,:bind_var2 ,:bind_var3 ,:bind_var4 ,:bind_var5 ,:bind_var6 ,:bind_var7 ,:bind_var8 ,:bind_var9 ,:bind_var10 ,:bind_var11 ,:bind_var12) RETURNING CONFIG_ID INTO :config_id
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
Time when worker failed: Wed Apr 29 2009 21:35:25
Evaluating symbolic arguments ....
Done evaluating symbolic arguments.
Could you please suggest?
Regards,
Krishnaraj

Delta links on applying patches/upgrade.

Similar Messages

Maybe you are looking for