Delta Load from CRM- picking up 0 records

Hi Gurus,
Iam trying to load CRM data into BW ODS using datasource 0crm_quotation_I. This load used to work fine about a month ago in Delta mode. But it started failing and so I ( my colleague deleted all the old requests) did an full repair and then an Init w/o data and when i schedule teh delta iam getting 0 records. Can anyone please throw light on this?/
Also is this could be an issue with Delta queue in CRM?/
Please reply..
DV
null

Hi Rajani,
Hi rajani with Init the process will take long. just for 50000 records it took 3 hrs and if we do init it will load all teh records from CRM and will take plenty of time. so we did a selective full load and used a program to convert them into full repair and thn did an int...
DV
null

Similar Messages

How to distinguish Delta download from CRM to Mobile from Initial download

Hi guys,
I checked out that when downloading from CRM to CDB (for mobile), the inbound queue is always CRI_XXX..._CDBI.
For data load from CRM to R/3, I remember that initial load and delta load, the inbound queue names would end up in differnet words (I for initial load, D for Delta load). But for load from CRM to CDB, it seems that only 'I' exists.
My question is, how can we distinguish delta load from initial load via the queue name? saying that the queue name is
CRI_CSA_BUPA_INIT_CDBI, can we simply judge that it's an initial load or delta one?
Thanks and best regards,
Raymond

Yes, CRI_CSA_BUPA_INIT_CDBI is the queue created for BUPA initial load from CRM to CDB. Delta loads from CRM to CDB would create no queues - they would be handled in the objects queue itself (for eg. CSABUPA*) queues.
Regards,
Ankan

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Filter Delta Upload from CRM into R3

Hi SAP gurus,
How can i set the filter for delta upload from CRM into R3? As far as i know, the filter settings in R3AC1 is only applicable for data exchange from the source system R3. What if i would like to filter the data where the source is CRM instead? Did i miss out anything in the configuration? I have been able to filter data coming from R3, but NOT data from CRM going into R3.
Would appreciate your help on this.
Thanks. Points will be rewarded.

Do you set all req.customizing in tr smoeac?

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects, and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Delta load from r3 to bw ?

i have one question on the mechanism of data transfer from r3 to bi 7.0. the followings is my concerns:
scenario:
The total numer of data is 1000 rows and these rows are seperated into 10 data package , each package contains 100 rows.
Now bw is trying to recieve these 10 packages from r3 in sequence.
When 5 data packages have been transfer to bi psa. the network is broken and the tranfer is canceled at the 6th data package.
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS.
How to find out how many records have been transfered from r3 to bw while the transfer has ended in
the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube.
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle ?
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer.
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Last doubt, what is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request ?
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
Please I am having all these doubts and I want you SAP experts to answer them please so that I can clear my doubts in production support . I really appreciate if someone explain me the scenarios here. It will be a really great help if someonce clears these doubts.

Hi......
What i want to know is when the network is reconnected ,Does the transfer start from the 6th data package?
If your connection is broken in between......inspite your load is through PSA...........you have to delete the request from the target(after making the QM status red)............then you have to reload it again............But before repeating the load check the connection is ok or not in SM59........
How to find out whether its a delta load or a full load if a transfer is scheduled from r3 to bw ? For both CUBE & ODS
This you can check in IP scheduler in the Update tab...........whether it is delta or full load.......
or you can also check in IP monitor(You can go here through RSMO..........IP monitor screen will open directly here............or you can also go through RSA1>> Find your IP >> Double click on it >> Click on the monitor icon in the top >> From the you will go to the IP monitor>> the under the Header Tab you can see whether it is a delta or Full update...........
Or you can check the datasource also..........
If it is a generic datasource go to RSO2..........and check...........If it is a standard datasource check it in RSA5...........
How to find out how many records have been transfered from r3 to bw while the transfer has ended in the middle ? I mean how to check how many records have been successfully transfered from r3 to cube/ods .Please tell me for ods as well as cube
Your load cannot be ebded in the middle.........it can failed.............if it fails then you have to delete the request from the target..........and then repeat the load.......
Is the continuation of transfer process is same for both ODS & INFOCUBE, if it ends in the middle
Yes.........
What is the procedure for full load & Delta load in case of CUBE & ODS ? I mean how to reschedule the transfer
If a full or delta load fails after extraction got completed due lock issue or SID issue.....etc..........and if you load is through PSA.............then just delete the request from the target without making the QM status red.......and reconstruct the request.........no need to repeat the whole load again........
But if you r load is not through PSA..........then make the QM status red........delete the request from the target........and repeat the load...........
And if the whole scenario is is in the support, SO I will be handling these issues on the live production server. Am I right ? So in this case my user id should have access to all the production r3 and production bw to do these change status to red and delete the request and reload the request etc., So I should be logging on to the production server and do all the manipulation, Am I right ?
Yes.......
What is repair request and so if the transfer stops in the middle we change the status to red and reload the request again , Is it called repair request or reload request?
Suppose you delta load has failed ............and you have deleted the request from the target without making the QM status red............In this case your data will be lost and your delta mechanism will get corrupted............In this situation.............
1) Delete the init flag........
2) You have to do Full repair..........(After filling the set up table)
3) Init without data transfer to set back the init flag
4) Then Delta upload.............
In case of an ODS............you cannot load Full update and delta upload parrallely..............Your ODS activation will fail...........suppose you want full upload in the ODS..............then you have to go for Full repair............
What is the difference between repeat delta & repair request & repair delta ? When do we choose these options, In which scenarios ?
I think Full repair concept is now clear............
Suppose your delta load fails...........After that you delete the request after making the QM status red............Then system will ask for a repeat delta when you will try to repeat the load...........which means it will pick the same delta records of the failed load..........
How do we schedule a daily load job from r3 to bw without the use of process chains ? I mean daily it should fetch the records from r3 to bw from the SD datasources at 10.00 PM ,how do we do that ?
This you can do via infopackage or infopackage group...........schedule it at the specific time.....
Check these links :
http://help.sap.com/saphelp_nw04/helpdata/en/20/ad673844a7114be10000009b38f842/frameset.htm
Re: Schedule Infopackage for last day of a fiscal period
Hope this helps you.........
Regards,
Debjani...........

Issue with delta load from R/3 to BW

Hi frnds,
There is a standarded D.S 2LIS_05_ITEM in R/3. Evereday We extraceted data from R/3 to BW based on this standard Data Source with delta load.There are two fields ZX and ZY in BW ,some times the data haven't extracted for this 2 fields in BW with the delta update.But some times this 2 fields properly extracted in to BW with the same delta update.
Why is it happen like this ? Please give some inputs on this.
Regards,
Satya.

Hello,
if its a standard field then its getting populated in correct way.
if its custom field then you need to analyze the records for which its getting populated and for one which its not.
Quite possible that some cutomization in CMOD results in this behaviour.
Also,check underlying tables to see the correct values.
Regards
Ajeet

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

Initial load from CRM to CDB

Hi,
I'm trying to do the initial download from CRM to CDB for a mobile scenario, using the transaction R3AS.
In this transaction, I'm selecting the load object, Source site, but unable to select the destionation site as CDB. Is there any configuration needs to be done before we do the initial download?
And important point is that there is an entry for CDB in the table SMOHSITEID.
Please help me in this regard.
Regards,
Praveen

HI
Praveen you forgot the basic thing is you need to create a site in CDB also
the site you created previously for crm data base not for cdb as u also know cdb is connected to crm data base through middleware first you create site, subscription, publication in in cdm also later start down loading R3as before golive if your mobile clients are already live use R3AC4 delta again you have to set up filters and parallel processing for reduce the down loading time
Reward with Points if Helpful
Venkat

Delta Load from SAP R/3 to XI

Hi Experts,
Please let me know your how can I send the following data using IDoc from R/3 to XI :
DELTA LOAD
1.New or changed WBS Elements/Networks (T Code: CJ02, perhaps others)
2.New or changed Orders (T Code: KO02 (internal), IW32 (PM))
3.Transaction Data for capital objects (Not thru XI)
4.New or changed Cost Elements (T Code: KA02, perhaps others)
5.New or changed Cost Centers (T Code: KS02, perhaps others)
Thanks,
Anirban.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 21, 2011 10:11 AM

You must see this in WE05 or BD87. Just release the idoc and have a look at we05 or bd87 and limit down the time where to search. in sm58 you can only see the idoc ith the system can not log on to the remote system. Did you check sm58 in the target system? did you check bd87 in the target system?

Only Delta load from R3 to MDM using MDM_CLNT_EXTR

Hi ,
I need to set up *only delta load * extraction from R3 to MDM using MDM_CLNT_EXTR. I dont want to put Intial load.
Can anyone help me in sorting out this.
BR
Syam

Hi Syam,
The extraction of delta data can be very well done by selecting the distribution mode as D in the transaction MDM_CLNT_EXTR.
But prior to that u need to take initial loads so as to differentiate the changes.
For more information you can refer to the below links.
https://websmp103.sap-ag.de/installmdm
Re: MDM-XI-ERP (customer master data)
https://websmp201.sap-ag.de/~sapidb/011000358700001119492007E
Hope it helps.
Thanks,
Minaz

Delta Changes from CRM to ERP

Middleware gurus,
Our delta changes with the BPs from CRM to ECC are generating a "Message type is unknown". Has anyone ever seen this? It works fine from ECC to CRM. We're on CRM 5.0 and ECC 5.0.
Does anyone have any clue???

Hi,
Please check the Master Data Syncronization settings under ERP->SPRO->Cross Application Components->BP-> Master Data Syncronization.
You need to define the required BP Role, Groups and map accordingly to Account groups. Since you are facing problem with CRM-> ERP, you need to check the settings for CRM->ERP only.
I hope this helps.

Delta load does not pick up the new records.

Hi All,
My asset has a transaction in the ECC. In BW system for that asset, I have master data that asset posting period is 01/2008. I ran the delta today but my delta does not pic up the asset. what might the problem? how can i go ahead. here the extractor is 0FI_AA_11.
Kiran

Hi ,
first check wether there are any records in rsa3 for that data source ..
Regards,
Shikha

Delta Load from CRM- picking up 0 records

Similar Messages

Maybe you are looking for