Delta load from ODS to cube failed - Data mismatch

Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annie

Hi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie

Similar Messages

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Loading from ODS to Cube in process chain

Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
Bill

Hi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK

Can I do Parallel Full loads from ODS to Cube.

Hai,
Usually I will do one a full update load from OD'S to Cube. to speed up the process can I do parallel Full update loads from ods to Cube?
Please advise.
Thanks, Vijay,

Assuming that the only connection we are talking about is between a single ODS and a single Cube.
I think the only time you could speed anything up is in full drop an reload scenario. You could create multiple InfoPackages based on selection and execute them simultaneously.
If the update is a delta there is really no way to do it.
How many records are we talking about? Is there logic in the update rule?

Index for loads from ODS To Cube

The load from ODS to cube is taking a long time - In the start routine another ODS is being looked up - The keys for look up is say X and Y
There is already an index existing on keys X , Y & Z -
Will this index be used while doing the select on that ODS or I need to create a new index with only X and Y keys ?
Thnx

When you are running the start routine - run an SQL trace - ST05 - that will tell you if the index is being used.
Arun

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Automatic loading from ODS to Cube in 3.5

Hi All
I was under the impression that in version 3.5 in order to load delta from ODS to Cube you had to run the 8 series Ipak.
However I have recently noticed that this ipak is running automatically after a delta load into the ODS even when the load is not via a process chain.
Can somebody where and how this setting is maintained.
Regards
A

Hi,
Go to ODS display mode and check if "Update Data Automatically" is ticked in Settings.
Regards,
Kams

ARFCSTATE = SYSFAIL ??????? loading from ODS to cube

Hi,
I am loading a delta initialization from ODS to a cube. The load goes fine but never ends. I saw through SM37 transaction and the job has finished but with these messages at the end:
tRFC: Data Package = 6, TID = 0A11010C066C45438FC70221, Duration = 01:01:03, ARFCSTATE = SYSFAIL
tRFC: Start = 28.10.2006 12:10:34, End = 28.10.2006 13:11:37
tRFC: Data Package = 7, TID = 0A11010C066C45438FE00222, Duration = 01:01:38, ARFCSTATE = SYSFAIL
tRFC: Start = 28.10.2006 12:10:59, End = 28.10.2006 13:12:37
tRFC: Data Package = 8, TID = 0A11010C066C45438FE90223, Duration = 01:01:32, ARFCSTATE = SYSFAIL
tRFC: Start = 28.10.2006 12:11:07, End = 28.10.2006 13:12:39
tRFC: Data Package = 10, TID = 0A11010C04BC454390020000, Duration = 01:01:12, ARFCSTATE = SYSFAIL
tRFC: Start = 28.10.2006 12:11:32, End = 28.10.2006 13:12:44
Synchronized transmission of info IDoc 5 (0 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:03, ARFCSTATE =
tRFC: Start = 28.10.2006 13:12:45, End = 28.10.2006 13:12:48
Job finished
What does this ARFCSTATE = SYSFAIL means and how to correct this?
Thanks for your help!!!

Hi Miguel Sanchez,
I hope you have with PSA in IP. If not run with PSA option and goto Detail tab of the Monitor , Expand the node Extraction Check for the message 'Data Selection is Ended'.
If you find this message you can update from PSA.
otherwise Go for Repeat the Delta.
and also refer the notes 516251.
also the error you are reporting could be for several reasons. Could you therefore please check the following:
1) check the RFC destination in SM59 for both your BW my self system
2) in SM59, in BW source system, go to menu path "test"
 -> "connection" and test this for errors
3) in SM59, in your BW source system, go to menu path "test"
 -> "authorization" and check if the user and password are o.k.
4) check the port definitions in WE20 and WE21
5) finally check that you have sufficient DIA processes defined in
 your BW and R/3 source system (you should have at least one more
 DIA process than all other work processes combined; this is described
 in more detail in notes 561880 and 74141).
Please check if this solves the problem for you.
Hope it helps.
Regards,
Srikanth.

Loading from ODS to Cube

I have a process chain for GL.
Data was getting loaded first to ODS and then to CUBE.
Now i there is no update to cube is scheduled. I removed 'Further Update' process from process chain.
During loading I am getting a warning message as follow:
There must be a type "Update ODS Object Data (Further Update)" process behind process "Activate ODS Object Data" var.ACTIVATE_ODSu201D
So plz suggest me any way to remove this warning message.
Thanx,
Vishal

Hi Vishal,
since you removed 'Further Update' process from process chain, this message is comming, i hope instead of this peorcess you are loading dta from ODS to Cube using Infopackge at process chain.
at ODS - setting uncheck setting Further update to data targets (i assume you are loading data from ODS to Cube using Infopackage at process chain).
Best Regards.

Error while loading from ODS to CUBE

Hi guys,
I am loading data from source system to ODS and from ODS to CUBE. Ok. The data came successfully from Source System to ODS. But while coming to ODS to CUBE it is showing some error at Data Packet 13. Ok. In CUBE, I loaded the data by using update ODS data to data target, at that time it shows two options like FULL UPDATE and INIT UPDATE. Then I selected FULL UPDATE and then I checked in processing tab there is only one option enabled i.e. only data target. OK and then I loaded it. Now after getting the error where I can correct it. There is no PSA option in monitoring.
Other wise how I can change option in Processing tab of infopackage for PSA. But I know one point that when we load the data from one target to another the only one option available in processing tab is only data target. How can I change that option and how can I correct the error.
Thanks
Rajesh

Hi,
i solved my question like the following.
Go to monitoring of the CUBE and select the option "read every thing as manually" -> then it shows another screen for correcting the records -> correct all the records and load the data again. ok
Thanks
Rajesh

Data load from DSO to cube fails

Hi Gurus,
The data loads have failed last night and when I try to dig inside the process chains I find out that the cube which should be loaded from DSO is not getting loaded.
The DSO has been loaded without errors from ECC.
Error Message say u201DThe unit/currency u2018source currency 0currencyu2019 with the value u2018spaceu2019 is assigned to the keyfigure u2018source keyfigure.ZARAMTu2019 u201D
I looked in the PSA has about 50, 000 records .
and all data packages have green light and all amounts have 0currency assigned
I went in to the DTP and looked at the error stack it has nothing in it then I changed the error handling option from u2018 no update,no reportingu2019 to u2018valid records update, no reporting (resquest red)u2019 and executed then the error stactk showed 101 records
The ZARAMT filed has 0currency blank for all these records
I tried to assign USD to them and the changes were saved and I tried to execute again but then the message says that the request ID should be repaired or deleted before the execution. I tried to repair it says can not be repaired so I deleted it and executed . it fails and the error stack still show 101 records.when I look at the records the changes made do not exist anymore.
If I delete the request ID before changing and try to save the changes then they donu2019t get saved.
What should I do to resolve the issue.
thanks
Prasad

Hi Prasad....
Error Stack is request specific.....Once you delete the request from the target the data in error stach will also get deleted....
Actually....in this case what you are suppose to do is :
1) Change the error handling option to u2018valid records update, no reporting (resquest red)u2019 (As you have already done....) and execute the DTP......all the erroneous records will get sccumulated in the error stack...
2) Then correct the erroneos records in the Error Stack..
3) Then in the DTP----in the "Update tab"....you will get the option "Error DTP".......if it is already not created you will get the option as "Create Error DT".............click there and execute the Error DTP..........The Error DTP will fetch the records from the Error Stack and will create a new request in the target....
4) Then manually change the status of the original request to Green....
But did you check why the value of this field is blank....if these records again come as apart of delta or full then your load will again fail.....chcek in the source system and fix it...for permanent solution..
Regards,
Debjani......

Data loads from ODS TO CUBE

Hi,
   i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
sp

Hi Srinivas,
        check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
         Do a Init load and then do the delta load.
hope this will help.

Loadihng from ODS to Cube failed in process chain

Hi All,
I have a process chain for SD loads scheduled every night. It gave me an error while loading data from Billing ODS to Billing Cube(via Further Processing, and the data is not available in PSA).
The error it gave is as follows:
Error while updating data from DataStore object ZSD_O03
Error 7 when sending an IDoc
Time limit exceeded. 3
Time limit exceeded.
Errors in source system
Now the request is loaded in Cube(YELLOW status) with transfered records 87125 and added 62245. But there is no way by which we can check if the complete data has come to the cube.
i did not delete the previous request from the cube and tried to repeat the process chain from the same point...it then gave me the following error:
-Last delta incorrect. A repeat must be requested. This is not possible.
Please tell me now what should I do...i don't have to miss the delta records in the cube.
1)Should I delete the prevous loaded request in cube and repeat the process chain from the same point...will it get all the delta records in that case???
2)Should I delete the request from cube and manually repeat the last delta for the cube. and then manually load the remaining process chain.
please help me out soon..
Thanks and Regards,

Hello Niyati
you can use 2nd option
Your error message is comming because of lack of BGD process and memory....just set the status of request in cube to red, delete it, and run a repeat load from infopackage.....
If no. of records are high than just go for the option of "load data in PSA and than subsequently in data target"
in infopackage
Thanks
Tripple k

Delta loading daily ods to cube

HI guys
delta not laoding to ods to cube.last laoding in ods 3 /06 .
when m try to loading m getting erorr
subseq. processing(messages) : errors ocuured
Activation of M records from DataStore object 0FIGL_O10 terminated ,
REquest REQU-D3k2lr788qjc4g9w7h8fwbnhk(2.130) has not or not c0rrctely updated;p
same msg showing in
other (messages ): errors occurred
Diagnosis
    Request REQU_D3K2IR788QJC4G9W7H8FWBNHK (2.130 ) for DataSource 0FI_GL_10
    from source system P02CLNT800 has the status green and a lesser SID (and
    is therefore older) than the request that you currently want to update
    into the DataStore object.
    This is not possible because the sequence of requests has to be
    followed.
    Delta- and init requests have to be updated to the DataStore object in
    the request sequence.
please advise on this
Regrds
patel

Patel,
Go to RSRQ. Give this request no. REQU_D3K2IR788QJC4G9W7H8FWBNHK. There you will find the message that this request has not been properly updated. You will find a button to update the request. Update this to the data target and activate. You will be thru this time.
Enjoy!!
Shambhu

Delta load from ODS to cube failed - Data mismatch

Similar Messages

Maybe you are looking for