Delta loading daily ods to cube

HI guys
delta not laoding to ods to cube.last laoding in ods 3 /06 .
when m try to loading m getting erorr
subseq. processing(messages) : errors ocuured
Activation of M records from DataStore object 0FIGL_O10 terminated ,
REquest REQU-D3k2lr788qjc4g9w7h8fwbnhk(2.130) has not or not c0rrctely updated;p
same msg showing in
other (messages ): errors occurred
Diagnosis
    Request REQU_D3K2IR788QJC4G9W7H8FWBNHK (2.130 ) for DataSource 0FI_GL_10
    from source system P02CLNT800 has the status green and a lesser SID (and
    is therefore older) than the request that you currently want to update
    into the DataStore object.
    This is not possible because the sequence of requests has to be
    followed.
    Delta- and init requests have to be updated to the DataStore object in
    the request sequence.
please advise on this
Regrds
patel

Patel,
Go to RSRQ. Give this request no. REQU_D3K2IR788QJC4G9W7H8FWBNHK. There you will find the message that this request has not been properly updated. You will find a button to update the request. Update this to the data target and activate. You will be thru this time.
Enjoy!!
Shambhu

Similar Messages

  • Delta load from ODS to cube failed - Data mismatch

    Hi all
    We have a scenario where the data flow is like
    R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
    The cube has an additional field called "monthly version"
    and since it is a history cube , it is supposed to hold data
    snapshots of the all data in current cube for each month .
    We are facing the problem that the Data for the current month
    is there in the history ODS but not in the cube . In the ODS ->Manage->requests
    tab i can see only 1 red request that too with 0 recs.
    However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
    with the current month date. Could these red requests be the reason for
    data mismatch in ODS and cube .
    Please guide as to how can i solve this problem .
    thanks all
    annie

    Hi
    Thanks for the reply.
    Load to Cube is Delta and goes daily .
    Load to ODS is a full on daily basis .
    Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
    Thanks
    annie

  • Can I do Parallel Full loads from ODS to Cube.

    Hai,
       Usually I will do one a full update load from OD'S to Cube. to speed up the process can I do parallel Full update loads from ods to Cube?
    Please advise.
    Thanks, Vijay,

    Assuming that the only connection we are talking about is between a single ODS and a single Cube.
    I think the only time you could speed anything up is in full drop an reload scenario. You could create multiple InfoPackages based on selection and execute them simultaneously.
    If the update is a delta there is really no way to do it.
    How many records are we talking about? Is there logic in the update rule?

  • Error in delta loading from a planning cube

    hi all,
    I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
    any help is appreciated.

    Hello Ajay,
    Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
    It is a customizing issue to tell the infopackage to end "green" when it has no data.
    Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
    Hope that helps
    best regards
    Yannick

  • Error when loading from ODS to Cube

    Hello Friends,
    I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
    07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
    07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed     
    I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
    Thanks.

    Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
    Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
    A few questions:
    How are you loading ur cube?
    Did the data get thru fine to PSA with the infopack in question?
    How did you load ur DSO(assuming the load was successful)?
    Message was edited by:
            voodi

  • Loading from ODS to Cube in process chain

    Hi Experts,
    How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
    Thanks,
    Bill

    Hi,
    You can use a DTP for this.
    Create transformation between DSO and cube.
    Create DTP and run it.
    Loading data from one cube to another cube.
    Cube to cube data loading
    how to upload data from cube to cube
    Can we pull data from one cube to another cube
    Data Load Steps:
    Reading data from another cube
    Hope this helps.
    Thanks,
    JituK

  • Load fail - ODS to Cube - INIT req

    Hi experts..
    Im loading init request from ODS to my cube.The req contains 12 million records in the ODS.I got the following error message in the RSMO.
    Job termination in source system
    Diagnosis
    The background job for data selection in the source system has been terminated. It is very likely that a short dump has been logged in the source system
    Procedure
    Read the job log in the source system. Additional information is displayed here.
    To access the job log, use the monitor wizard (step-by-step analysis)  or the menu path <LS>Environment -> Job Overview -> In Source System
    Error correction:
    Follow the instructions in the job log messages.
    This load is from ODS to CUBE ,and how does the source system is related here..
    Bcos it says error in the source system.????
    How to correct this error????
    thanks & regards
    ragu

    Hi Ragu
    When you are loading from ODS to Cube at that time source system BW Myself system (your own BW system) acts as source system.
    As given in Procedure section ->To access the job log, use the monitor wizard (step-by-step analysis) or the menu path <LS>Environment -> Job Overview -> In Source System->>> Look for job log.
    Also check in ST22 for short dump and let us know the error description in detail.
    Regards
    Pradip

  • Index for loads from ODS To Cube

    The load from ODS to cube is taking a long time - In the start routine another ODS is being looked up - The keys for look up is say X and Y
    There is already an index existing on keys X , Y & Z -
    Will this index be used while doing the select on that ODS or I need to create a new index with only X and Y keys ?
    Thnx

    When you are running the start routine - run an SQL trace - ST05 - that will tell you if the index is being used.
    Arun

  • Delta load to ODS taking too much time

    Hi,
    I have one delta load running everyday to ODS .its getting data from R3 & its taking too 3-4 hours daily.due to this data is not getting updated in cube on time and there arises issue with data in Reports
    Please let me know what are possible solution to check this ODS Delta load and improve its loading time
    thanks
    nilesh

    Please check if the extraction is taking more time in R/3 or data loading is taking more time in BW. If R/3 extraction is taking is more time, try creating indexes on R/3 tables.
    -Vikram

  • Data loading from ODS to CUBE

    Hi All,
    I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
    now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
    Regards,
    Komik Shah

    Hi,
    Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
    1) get delta only once
    2) get data by request.
    If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
    Generally both should be unchecked but can vary as per requirements.
    Now for your new DTP, i dont think it will aloow you to change to FULL.
    If its allowing you to select FULL, then select it and select from acive table.
    try to load and see.
    regds,
    Shashank

  • Automatic loading from ODS to Cube in 3.5

    Hi All
    I was under the impression that in version 3.5 in order to load delta from ODS to Cube you had to run the 8 series Ipak.
    However I have recently noticed that this ipak is running automatically after a delta load into the ODS even when the load is not via a process chain.
    Can somebody where and how this setting is maintained.
    Regards
    A

    Hi,
    Go to ODS display mode and check if "Update Data Automatically" is ticked in Settings.
    Regards,
    Kams

  • Data loads from ODS TO CUBE

    Hi,
       i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
    sp

    Hi Srinivas,
            check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
             Do a Init load and then do the delta load.
    hope this will help.

  • ARFCSTATE = SYSFAIL ??????? loading from ODS to cube

    Hi,
    I am loading a delta initialization from ODS to a cube. The load goes fine but never ends. I saw through SM37 transaction and the job has finished but with these messages at the end:
    tRFC: Data Package = 6, TID = 0A11010C066C45438FC70221, Duration = 01:01:03, <b>ARFCSTATE = SYSFAIL</b>
    tRFC: Start = 28.10.2006 12:10:34, End = 28.10.2006 13:11:37                                    
    tRFC: Data Package = 7, TID = 0A11010C066C45438FE00222, Duration = 01:01:38, <b>ARFCSTATE = SYSFAIL</b>
    tRFC: Start = 28.10.2006 12:10:59, End = 28.10.2006 13:12:37                                    
    tRFC: Data Package = 8, TID = 0A11010C066C45438FE90223, Duration = 01:01:32, <b>ARFCSTATE = SYSFAIL</b>
    tRFC: Start = 28.10.2006 12:11:07, End = 28.10.2006 13:12:39                                    
    tRFC: Data Package = 10, TID = 0A11010C04BC454390020000, Duration = 01:01:12, <b>ARFCSTATE = SYSFAIL</b>
    tRFC: Start = 28.10.2006 12:11:32, End = 28.10.2006 13:12:44                                    
    Synchronized transmission of info IDoc 5 (0 parallel tasks)                                     
    tRFC: Data Package = 0, TID = , Duration = 00:00:03, ARFCSTATE =                                
    tRFC: Start = 28.10.2006 13:12:45, End = 28.10.2006 13:12:48                                    
    Job finished                                                                               
    What does this ARFCSTATE = SYSFAIL means and how to correct this?
    Thanks for your help!!!

    Hi Miguel Sanchez,
    I hope you have with PSA in IP.  If not run with PSA option and goto Detail tab of the Monitor , Expand the node Extraction Check for the message 'Data Selection is Ended'.
    If you find this message you can update from PSA.
    otherwise Go for Repeat the Delta.
    and also refer the notes 516251.
    also the error you are reporting could be for several reasons.  Could you therefore please check the following:
    1) check the RFC destination in SM59 for both your BW my self system
    2) in SM59, in BW source system, go to menu path "test"
       -> "connection" and test this for errors
    3) in SM59, in your BW  source system, go to menu path "test"
       -> "authorization" and check if the user and password are o.k.
    4) check the port definitions in WE20 and WE21
    5) finally check that you have sufficient DIA processes defined in
       your BW and R/3 source system (you should have at least one more
       DIA process than all other work processes combined; this is described
       in more detail in notes 561880 and 74141).
    Please check if this solves the problem for you.
    Hope it helps.
    Regards,
    Srikanth.

  • How to deceide that v should load to ods or cube?

    hello all
    having a doubt like how to deceide whether v should load data from r/3 to ods or cube,on what basis should v deceide?
    Many Thanks
    balaji

    Hi Balaji,
    Some of the features for which you can use an ODS are
    For delta enabling the data, if the R/3 datasource does not give you delta updates and you have to extract full uploads.
    If you need to have detail or line item data available for indepth analysis even though you might be reporting on aggregated data from an Infocube.
    If you are looking for any of the above features then you would consider getting your data to/through an ODS, else it would be advisable to load data to the cube for reporting purposes as the cube is designed on the principles of Data warehousing and hence suited for reporting. Whereas and ODS is just a flat file structure and hence not suitable for reporting of large data sets.
    Hope it helps.
    Anurag

  • Loading from ODS to Cube

    I have a process chain for GL.
    Data was getting loaded first to ODS and then to CUBE.
    Now i there is no update to cube is scheduled. I removed  'Further Update'  process from process chain.
    During loading  I am getting a warning message as follow:
    There must be a type "Update ODS Object Data (Further Update)" process behind process "Activate ODS Object Data" var.ACTIVATE_ODSu201D
    So plz suggest me any way to remove this warning message.
    Thanx,
    Vishal

    Hi Vishal,
    since you removed 'Further Update' process from process chain, this message is comming, i hope instead of this peorcess you are loading dta from ODS to Cube using Infopackge at process chain.
    at ODS - setting uncheck setting Further update to data targets (i assume you are loading data from ODS to Cube using Infopackage at process chain).
    Best Regards.

Maybe you are looking for