Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta  master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

Similar Messages

  • How to load master data from 2 source system without using 0logsys as compo

    Hi Gurus,
    I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
    So, please help me out providing logic.
    thanks in advance
    Peter.

    Hi Peter,
    Can you brief me how did you resolved your issue?
    Regards
    Utpal

  • To Load Master Data From Two Source System

    Hi All,
    I have a small question :
    - Can we load master data from two different source system say from flat file and R3 or any two different or similar source  system?
       If answer is "Yes", then how?? If possible step by step.
    Appreciate your valuable points.
    Thanks,
    Niraj Sharma

    Hi,
    Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
    I am getting below ERROR.
    Object DTP DTP_d55.......could not found in version A.
    I have  checked the Master data locally for source sys in compounding Tab of the key field.
    Please help..
    Thanks,
    Niraj

  • How to load text data from multiple source systems.

    Hello Gurus,
    I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
    Please gimme some inputs to proceed.
    Thanks in advance
    Peter

    Hi,
    I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
    so try to load simply:
    material key, text, lang (optional)
    Hope it helps.

  • Master Data from two source systems

    Hi Gurus,
    I need to load master data from two different source systems. What is the best way I could do that ?
    I know one approach is add system id 0logsys as prefix in compound tab and load it. But problem is master data table will have two different records and in the report it will display 2 records, can not summarized it in the report. But I need one record in the report. What is the best approach ?
    Thanks
    Liza

    Hi,
    Create two DataSources. one for each of the source system.
    Create two separate flows to the master from these two DataSources.
    Hope this helps!

  • Loading master data : error invalid characters

    Hello,
    I load master data (example 0PROG_POS) into BW with InfoPackage and loading stops with error "invalid characters". In the logs, the error is due to a special character (in french Ä :  a special A).
    On BW side, is it possible to solve this problem (I don't understand the message in the help : "If this message appears during a data load, maintain the attribute in the PSA maintenance screens").
    My BW is 3.5 patch 7
    Thanks in advance for your help.
    Daniel.

    HI Daniel
    all characterstic & special characterstic
    goto TCODE: RSKC -> all_capital-> F8
    again : rskc-> !"%&'()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXY ->F8
    GOTO SE11: RSALLOWEDCHAR (maintain special characterstic)
    also u  can goto-> SE37->RSKC_ALLOWED_CHAR_GET
    -> F8
    THANKS & BEST REGARDS
    SANGRAM KESHARI SUTAR

  • Error while loading master data (Displaying warnings like missing messags)?

    Hi,
    loading is successful but request is not in green.
    it is appearing in yellow colur.
    The warnings message(yellow in colour) is:
    "Data package 1: arrived in BW; processing: Data packet not yet processed."
    Error messages like:
    1.Extraction (messages): Errors Occured.
    2.Transfer (IDocs & TRFC): Missing messages or warnings.
    Data package 1: arrived in BW; processing: Data packet not yet processed.
    3.Processing(data packet): Warning received.
    Data package 1: Missing messages.
    Please suggest the solution what needs to be done.
    After reloading also the same errors are getting displayed.

    Hi
    You can go to the source system . In SM58 check for the tRFC's. Execute the tRFC's manually and see if this helps you to proceed. You need to check for tRFC's for your BWUSER who has executed the load. Also check in SM50 on the BW system to see if you have enough BGD processes available to run the loads. These should be ok for you to start
    Regards
    Vin

  • Master data from 2 source systems

    hi
    i am loading 2 cubes from 2 different source system
    1 is ECC and another is Flat file load from Old system which is no longer in use...
    now cube1 has Customer records as it is manitained in ECC system
    cube 2 has Customer records which exists in ECC and around 50 records are EXTRA
    so how to load Customers?
    should i load customers from ECC to 0customers
    and load customers from legacy system to ZCustomers
    how to approach this issues/ resolve it

    As per my understanding those extra 50 customers came through flat file. If you want those records in cube you can have a one time upload from flat file  to Customer master. If you want to neglect those records using foreign key settings you can stop the flow of those records into the cube. Essentially it depends upon your requirement.
    Regards
    Githen

  • Master Data Extraction from source system

    Hi BW Gurus,
    I need to extract the "<b>Purchase Document Type</b>" and "<b>Purchase Document Status</b>" master data from R3.
    Can anybody shed some light how can i find out which table in R3 host this data.
    Thank you in advance and i promise to assign point for your answers
    Thank you

    Hi,
    I feel the base table for Purchasing Document Type is T161.
    For Status of purchasing document there is no base table .the avilable value are comming from Available Domain values.
    With rgds,
    Anil Kumar Sharma .P

  • Delta Loads failling after system copy with error in source system(RSM340)

    Hi Guru's
    We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
    But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
    Could anybody help  me out in this aspect.
    Thanks!!!
    Kuldeep

    Hi,
    Check whether the profiles that ran in background have the following authorizations.
      The RFC user on BW, receiving data from OLTP system, should have  S_BI-WHM_RFC and S_RS_ALL in the user profile.
    The RFC user on OLTP, receiving request from BW system, should have  S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
    Regards .

  • Get Error in source system when loading flatfile from application server

    Hi
    I'm loading data from flatfiles on the application server. In the datasource if I display the sample data. It shows fine.
    But when I execute the infopackage I get an error when it is loading the data to PSA.
    The error is
    Error in source system
    Message no. RSM340
    There is no further information
    But if I load from my machine it works fine.
    Any help will be great

    Hi,
    As you can view display the sample data. It shows fine.
    It mean there is no issues in BW (File path is correct, Data in Flat file is correct).
    Then definetely its with the source system, which is resisting to pass IDOC to BW.
    Now.we need to know the its problem with File on App serv or App serv itself?
    Just check trying to Load another  Flatfile in App serv.
    Let me know.
    Regards
    Hari

  • Error loading master data RSDMD114

    Attempting to load master data - several objects fail with message:
    RSDMD114, "The Master Data is deleted in the background"
    I went as far as to delete all of the old data and start again.
    The object was reactivated.
    No locks found on the lock tables.
    Still getting the error.
    Anyone seen this before ?
    THANKS

    <b>The problem has been solved.</b>
    The data deletion job failed - so the control table was still set to show that the deletion run was in progress.
    Table <b>RSDCHABASDEL, Status Logging for Master Data Deletion.</b>
    Delete the entry from this table, look for the name of the object in question.
    Everything ran OK with the entry cleared from the table.

  • Best Practices for Loading Master Data via a Process Chain

    Currently, we load attributes, text, and hierarchies before loading the transactional data.  We have one meta chain.  To load the master data it is taking more than 2 hours.  Most of the master data is full loads.  We've noticed that a lot of the master data, especially text, has not changed or changed very little since we implemented 18 months ago.  Is there a precedence or best practice to follow such as do we remove these processes from the chain?  If so, how often should it be run?  We would really like to reduce the amount of the master data loading time.  Is there any documentation that I can refer to?  What are other organizations doing to reduce the amount of time to load master data?
    Thanks!
    Debby

    Hi Debby,
    I assume you're loading Master Data from a BI system? The forum here are related to SAP NetWeaver MDM, so maybe you should ask this question in a BI forum?
    Nevertheless, if your data isn't changed this much, maybe you could use a delta mechanism for extraction? This would send only the changed records and not all the unchanged all the time. But this depends on your master data and of course on your extractors.
    Cheers
    Michael

  • Transaction Data from multiple source systems

    Hi BW,
    I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
    Please someone should help me out with the best practice on this.
    Thanx.

    Hi Dan,
    Do you mean use 0LOGSYS as authorisation relevant InfoObject?
    Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
    Regards.

  • System log problem ( Errors in source system)

    Hi,
       I Got the error message at psa level while extracting data from r/3 to bi is
    Errors in source system
    Message no. RSM340
    and i checked in sm21 , i found the system log for my user as
    Operating system call gethostbyname failed (error no. 11004)
    I checked all related forums but no use.
    can any one give the solution.
    thank you.

    hi,
       Basis team side they are saying that every thing is ok. today when i trigger the info package at background job , after extracting 37 lakh records , i got the same error that is
    under details tab
    Data Package 1 : arrived in BW ; Processing : Processing not yet finished, entry 70 still missing  ,
    this message for data package 2 also and
    Data Package 151 : arrived in BW ; Processing : Selected number does not agree with transferred n
    this message for data package 152, 153, 154,155.
    under status tab the error message is
         *Error during import of results for employee 00004000     *
         *Errors in source system ( Message no. RSM340)     *
    I find one thing that when i gave selection on employee number i got the data into psa with out any error but when i gave date as selection at infopackage level i got tha same above error.
    Edited by: Srikanth.T on Feb 28, 2012 12:55 PM

Maybe you are looking for