Delta Loading -Zero Records Only-- Why?- Please Answer

Helo Gurus,
I have created one generic data source on a custom created table and put counter field as delta field. This table is populated by running one pgm.
Then I replicated the data source into BI and created initialisation and pulled data to PSA. Then from there to DSO and to Cube.
Then I run the program for another date and populated the table in R/3 with new 200 records. Then I created another InfoPackage in BI and put the update as Delta and scheduled immediately. <b>But it pulled 0 records</b>. <b>Why?</b>
Whether we need to delete the initialisation load from PSA before loading delta to PSA?
While creating Generic delta field (counter) , I put lower limit as 10 and checked the field additive delta.

Pallavi,
The program is populating the table. initial count was 15788. So after running the program for different date the count becomes 15801.
While Initialisation I pulled 15788 into PSA and then to DSO and then to cube. Then I run the program and made the count to 15801. Then I checked in RSA3 and is pulling 15801. Then I created Infopackage for delta update and scheduled teh same immediately. But pulling 0 records.
As you told I checked in RSA7. Its showing in the total field 0. But in the stat field when clicked its showing count as 15801. I went inside the delta update and repetition, its showing zero entries.
I had given lower limit of 10 as the field counter is numeric

Similar Messages

  • Delta fetching zero records

    Hi all,
    the delta load for a master data infoobject runs daily at 5.00PM.
    on 30th June, the load failed due to invalid character.
    as there was no one to monitor the load on saturday, it remained as it is.
    on 1st July, the delta ran again and fetched the same no of records and failed with the same error.
    on yesterday(2nd July) when we came, we saw the error and corrected the load which ran on 1st July.
    Yesterday,the delta load again ran on 5.00PM.but we had to kill this job due to some reason.After killing i manually changed the status to red though it became red.
    But with today's load it fetched 0 records with the message"no updates since the last delta"
    Delta update in the monitor shows"Repeat of last delta".
    so,have i lost any records in this process?how do i know if there were any records or not?
    <b>observation:</b>
    in R3 in table BWOM2_TIMEST the last delta entry is that of 30th.
    Any useful help will be rewarded
    Regards
    Dhanya.

    if i correct the 30th load, and again request delta ,will it bring all records from 30th?
    Yes... it shoudl bring data from 30th.
    yesterday i corrected the 1st July load and then when 5.00PM load ran ,i had to kill the job.But with today's load it fetched 0 records.
    is the 1st Load set tp green and Loaded in BI?
    Nagesh Ganisetti.
    Assign points if it helps.

  • BPC Hierarchy load - Zero record

    Hi Experts
    I am trying to load Master data + Hierarchy first time in this system and followed below both document..
    http://scn.sap.com/docs/DOC-35363
    http://scn.sap.com/docs/DOC-35364
    The master data/attribute load run successfully with selecting "OR" option and hierarchy..but BPC is not able to recognize the Hierarchy nodes..
    When I run only Hierarchy package then I get below log ->
    Task name HIERARCHY DATA SOURCE:
    No records are returned from 0GL_ACCOUNT
    Record count:                                                 0
    Task name CONVERT:
    No 1 Round:
    Reject count: 0
    Record count: 0
    Skip count: 0
    Accept count: 0
    Task name HIERARCHY DATA TARGET:
    Submit count: 0
    I am sure the issue is that BPC is not able to read Hierarchy from BW & i have checked the hierarchy structure is present in BW.
    I am working on BW 7.4 , BPC 10   Release -> 801   SP-Level 06  , EPM 17 Patch 2
    Thanks for your help!!

    Hi Andy
    I can not see the Hierarchy nodes in Web Admin after loading Master data.
    I have exact setup in other implementation in BW 7.3 and it is working but in BW 7.4 it is not
    Applied 2 relevant SAP note but still issue is there..
    1957783
    1968630

  • Delta Load Failure -  All BW gurus please help me

    Hi, BW experts.
    Can u please do the needful help.
    delta is running from ods to cube but all the data packets are going fine but in Monitor Tab - for a particular data packet it is showing " Data Package 45 : arrived in BW, Processing Data Packet not yet processed."
    When checked the dump anaysis. It is showing " The Database system detected a deadlock and avoided it by rolling back your transaction.
    So, what should i do in this regard.
    Thanks & Regards
    Sagar

    Step 1  :  If Data is there in PSA Do Manual Load.
    By Making the Status Red, go to Details Tab and in that right click on the packet which is not loaded ,  say manul Load. 
    when system completed the manul load refresh the details.  if we get any error ( STEP 2 )
    Step 2:  Delete the Request from the cube,  and then  in ODS un mark ( Data Mart Status of the Request )the request which you are loading in to cube as delta..
    Re trigger the info pack. 
    Thanks
    Sharp
    Message was edited by:
            sharp deep

  • Flat file delta loading

    Hi
             i have laoded the data in to the cube through flatfile, i created the packege for full load , init, and delta packges. suppose  i have laoded the 1000 records from flat file to cube . i added 100 records to the file , and run the delta infopage , but its loading 1100 records again , why so , it has to take the only dletas means newly added records , why its laoding all reocrds  when i run the Delta packege also ? Please tell me

    Flat file delta concept as new same the regular delta.
    In case you have 100 new records, you have send them in a different flat file, the extractor does not maintain any delta pointer in case of flat files.
    Also you need to ensure in your delta records whether you are sending new images or after images. In case of new images you have load your data in DSO first.
    -Neelesh

  • What is the diffrence between full load and delta load in DTP

    hI ,
    I am trying to load the data into CUBE from another cube using DTP ..
    There are 2 DTPS ..
    1: DTP with full load
    2: DTP with DELTA load ..
    what is the diffrence betwen thse two in DTP ...
    Please can somebody help me

    1: DTP with full load  - will update all the requests in PSA/source to the target,
    2: DTP with DELTA load - will update only new requests to the datatarget
    The system doesnt distinguish new records on the basis of changed records, rather by the request. Thats the reason you have datamart status to indicate if the request has been loaded to further datatargets.

  • Is it possible to make a delta load for a Master data with Standard DS

    I have a full load bringing huge data for master data with standard datasource.
    I want to run a delta due to huge no. of records but when I create a new Infopackage it dont give a option for delta update.
    Are delta loads specific to only standard or customized DS's or any other reason behind that ?

    I kind of understand what you are asking about, but I am unclear as to how it pertains to our BO SDK.
    You are wanting to find the differences between a large dataset and another large dataset.
    I am not sure what an Infopackage is.
    Are you using the BO Enterprise SDK or some other product?
    Jason

  • Connection Object Delta Load not happening

    Hi Gurus,
                 I am doing integration between ISU and CRM 5.0. I have achieved integration both sides for BP , Contract Account. I have also done initial load for Connection Objects using object 'SI_CONNOBJ'. We are able to see IBase getting created for the Connection Objects but when I change the data in a particular Connection Object it is  not trigerring Delta Load for the Object.
                Please help me for the same.

    Hi Aishuman,,
    Please check for the following entry in R/3 table TBE31:
    EVENT    IBSSICON
    LAND
    APPLK    BC-MID
    FUNCT    ECRM_CONTRACT_COLLECT_DATA
    which brings the delta change to CRM.
    Also,in CRM txn:R3AC1,check for the filter setting for object SI_CONNOBJ.
    Also,in R/3 table CRMRFCPAR ,make sure that for object SI_CONNOBJ(or *) for consumser CRM(or *),value of DISCARDDAT is not set to X.If set to X,would prevent delta change to flow to CRM.
    Also,check for the queue registration in txn:SMQR.If your queue is de-registered or lock is set,then entry will not be processed in CRM.
    Hope this helps!
    Regards,
    Shanthala Kudva.

  • ZERO records

    Hi Gurus,
    I extract the material number with different combinations of Category1 and Category2 fields into InfoCube whose QTY > 0. So The infoCube contains  Material number, Category1, Category2 and QTY > 0  records only. But the user wants to see the same material number with the combination of fields Category1 and Category2 whose QTY = 0 .  Since the InfoCube have data QTY >  0 records only so please advice is there any way in BEx report I could display the same material number whose QTY = 0. Any advice I would appreciate it.
    Thanks
    Liza

    Hello,
    we can see the keyfigure values inorder to characteristic,I think its not possible to see the keyfigure value = 0 by restricting the keyfigure.
    If the keyfigure value' 0' is there for particular characteristic selection it will display in the report by maintaining the restricted keyfigure.
    Hope this wil helpful for u.
    Bye,
    Chandu.

  • Contract Account delta load not happening

    Hi Gurus,
    I am doing integration between ISU and CRM 7.0. I have achieved integration both sides for BP . I have also done initial load for Contract Accounts using object 'BAUG_MAIN'. We are able to see Business Agreement getting created for the Business Partner in CRM but when I change the data in a particular Contract Account in ISU or create a new Contract account after the initial load it is not trigerring Delta Load for the Object.
    Please help me for the same.
    Regards,
    Nasreen

    Hello Nasreen,
    A possible reason for this issue could be that no module is assigned to the event 1030 in FQEVENTS. If you want to report FKKVK changes to BW (i.e. update the DataSource 0CACONT_ACC_ATTR_2) then the module FKK_EVENT_1030 should be activated here. The similar is valid for changes of FKKVKP table (= DataSource 0UC_ACCNTBP_ATTR_2) -> activate
    the module ISU_EVENT_1030.
    I hope this is helpful for you.
    Kind Regards
    Olivia

  • Master data Full load to Delta load

    HI
    I have Order number (ZONDRNO)for this we are loading the Master data form BW  to BW full load.
    This Order number is Generi Data source
    Can any one help me how to do master data Full load to Delta load.
    Thanks in Advance
    kumar
    Edited by: kumar reddy on Oct 9, 2008 3:14 AM

    Hi,
    Firstly you are stating that you are loading from BW to BW. How are you doing it ? Are you doing through a datamart ?
    Secondly you have also told that you have created a generic datasource so from this we can deduce that you are not doing a datamart load but you are doing through a datasource.
    Thirdly to achieve delta for a generic datasource you should make sure that the datasource in question here is delta enabled.
    Once all these are done all you need to do is a delta init and schedule further delta loads.
    Regards,
    Pramod

  • Question for delta loading, why can not update existing record in cube

    Hi, Gurus,
    I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
    However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
    BTW: when I check delta queue, why there is not any queue?

    Hi,
    In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
    If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
    With rgds,
    Anil Kumar Sharma. P

  • Im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP

    im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Zero Record Data Load Problem

    Hi,
    Please give your suggestion for following problem.
    we are loading data from ETL (Flat File - Data Stage) into SAP BW 3.1.
    data may contain Zero records. When we try to push the data into BW. At ETL side, it is showing successful data transfer. At, BW side it is showing "Processing state" (Yellow light). and all BW resources are hang-up.
    When we try to send another data load from ETL side, We could not push the data as BW resources are hang up by the previous process.
    Whenever we are getting this kind of problem, we are killing the process and continuing with another data Re-load. But this is not a permanent solution. This is happening more often.
    What is the solution for this problem?
    One of my colleague suggested following suggestion. Shall I consider this one?
    Summary:  when loading with empty files, data may be in the processing state in BW 
    Details:  When user load with empty file(must be empty, can not have any line returns, user can check the data file in binary mode), data is loaded into BW with 0 records. BW will show be in yellow state(processing state) with 0 record showing, and in the PSA inside BW, 1 datapacket will show there with nothing inside. Depends on how user configured their system, BW server can either accept the 0 record packet or deny it. When BW server is configured to accept it, this load request will change to green state(finished state). When the BW server is configured to deny it, this load request will be in the yellow state.
    Please give me ur suggestions.
    Thanks in advance.
    Regards,
    VPR

    hi VPR,
    have you tried to set the light 'judge'ment
    go to monitor of one request and menu settings->evaluation of requests(traffic light), in next screen 'evaluation of requests', 'if no data is avaible in the system, the request' -> choose option 'is judged to be successful' (green).
    Set delta load to complete when no delta data
    hope this helps.

  • Zero records in delta update

    Dear All,
    In HR :Time management (Time and Labour )(cube)  0PT_C01 two data sources are there  and one is 0HR_PT_1 , during delta load it does not get any recors and it will show zero records at cube level and in r/3 rsa3 ir shows new records.Please suggest how to solve this issue.
    Regards
    Albaik

    Hi,
    This is because you havent run the init load till now.
    We have to run a init load before running delta(one time process).
    now as you have selected init with datatransfer, you got all the records transferred.
    from next time, no need to run init and you can proceed with delta.
    Cheers,
    Srinath.

Maybe you are looking for