Delta Loads for 2lis_02_scl and 2lis_02_itm
Hi Experts,
I am facing an issue, After initializing the setup tables and doing the init load for 2lis_02_scl and 2lis_02_itm whenever I do the delta loading for these two, all the dataload finish with green status and extracting 0 from 0 records.
I can see the queues for both these datasources in RSA7 in R/3, yet no record is extracted.
Any help will be appreciated.
Regards.
Hi,
have a look into transaction smq1. there you should be able to see your extraction queues with the entry MCEX02 (or likewise)
Please schedule the program RMBWV302 and when this one is finished, start the deltapackage.
hth
cheers
sven
Similar Messages
-
Hi Gurus,
I am getting a short dump when i am trying to load the data from datasources: 2lis_02_scl and 2lis_02_itm.
It is giving the error message : "
"MESSAGE_TYPE_X" C
"SAPLRSC2" or "LRSC2U01"
"RSC2_QOUT_READ_DATA"
and even the repeat of delta has failed again.
Can ne body please help as this is business critical issue.
Thanks in advance,
Anurag RathoreHi
There is one other method where in youc an go to the Item and Schedule line tables ( EKET) and filter on created on and load those documents into BW.
However this is tedious process as you many have several documents to fill the setup tables
This is just another alternative..
Regards,
Srini -
2LIS_02_SCL and 2LIS_02_ITM missing records
Hi,
We have a problem with DS: 2LIS_02_SCL and 2LIS_02_ITM. We load data in 0PUR_C01 throu Bi content standard objects (0PUR_C01 2LIS_02_ITM / ...SCL). ... there seem to be problem with DS because In infocube 0PUR_C01 we don't get consigment records (consigment records - possition on PO). I have already checked DSs in RSA3 and those records are missing?
Any ideas?
JN.Hi,
are you sure you have PO's for your consignments? I would recommend to check the source tables EKKO, EKPO and EKET first. Once you are sure to have PO's there for consignments you can run RSA3 for the DS with the EBELN (PO Number) and confirm that the extractor does not extract them. One thing to watch out for the RSA3 does not pull from the delta queue but from the setup tables. So you need to make sure that the Consignment Document you are missing are the setup tables.
Hope that helps,
Michael
PS the extractor also pulls BSTYP Document Category K (Contracts) and L (Scheduling agreements)
Edited by: Michael S on Jul 14, 2009 12:20 PM -
2lis_02_scl and 2lis_02_itm
Hi developers,
I've activated the extractors 2lis_02_scl and 2lis_02_itm, when I do the initalitation in the setup tables I don't see any record also if in the execution log there are 7230 documents.
Any ideas to solve my problem?
Best Regards!Hi Roberto,
Thanks for your answer!
You have understood my problem! After the setup OLI3BW for MM-PUR in the table MC02M_0SCLSETUP and MC02M_0ITMSETUP there are not entry and in LBWE I've activated the extractors.
The Extractor LIS for area MM Stock and SD work perfectly.
The problem is only for 02MM! I've opened an OSS note but none answer!
Can you help me, plese?
Thanks a lot! -
Difference 2LIS_02_SCL and 2LIS_02_ITM
Hello,
I've stumbled on a simple question when analyzing Purchasing Data Business Content. We would like to activate this BC because it would suit our needs, but found out that 2LIS_02_SCL and 2LIS_02_ITM provide the same InfoObjects to 0PUR_C01.
What's the difference between these two DataSources? Who can provide us with information so we can make a choice between these DataSources?
Kind regards,
Bastiaan Lascaris
points assured *Hi,
th einfo object may be the same but there is a big diffrence . LIS_ITM is meant for item level information e.g for one item 001 u have quantity 90PC.
Your LIS_SCl will contain the schedule line information that is if somebody wants schedule date wise e.g we have in Item 001 quanity 90PC,
in Schedule line it will be schedule line wise that is,
Item Schedule line Schedule line date quantity
001 1 01.01.2005 45
001 2 01.02.2006 45
Hope u got the things..
Regards.. -
Delta load for 2LIS_06_INV is failing after EHP5 upgrade of ECC system
Hi Experts,
Our ECC Production system was upgraded to EHP5 last weekend.
Since then Delta load for datasource 2LIS_06_INV is failing. This is the only datasource got impacted. Full Load and Initialization Loads are running fine. Only Delta load is failing because of following error:
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/BI0/SAPLQI2LIS_06_INV " in
include "/BI0/LQI2LIS_06_INVU04 " in
line 1:
"Function "/BI0/QI2LIS_06_INV0002" not found in Function Library."
Thanks and Regards,
Sandeep SharmaSAP suggested Note to fix this issue.
-
Re: Delta Load for master attribute CUSTOMER
Dear All,
I have got the delta loading into 0customer_attr and 0 material_attr in production. Yesterday the load failed because the previous change run run has been terminated and locked the attributes of characterstics 0 material and 0customer.
To solve this i went back and ran the attribute change run and all the locks got released.
Now i know that i need to repaeat the delta load.
If we go to the RSMO for the failed load i see that under details tab in processin option we have as follows
Transfer rules(67-->67 records):No errors(This is Green)
Master data received:Processing being started(Green)
Transfer 67 data records in communication structure(Green)
This is where the processing stopped.
Update(0new/0changed)(in red): Errors occured
My doubt is if i now repeat the load in process chain will the 67 records come into the0customer infoobject.
Will this have any impact on the next day delta load.
Kindly advice.
Regards
MadhuriHi abhijit,
When i tried to do a repeat delta the load failed again and when i check for the error message i get the following
Diagnosis
The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Procedure for System Administration
How do i proceed further.
Regards
Madhuri -
Hi Friends,
I have a issue in delta load for 0customer. The load was initialized with data transfer for the first time load ,The data was loaded succesfully , now we have enhaced the 0customer_attr with customer group .In RSA3 if we check we are getting values for customer group. we created one delta infopackage with update status as delta and scheduled the load .we are getting data load success status but with 0 records. Please can anybody share the process for delta load for master data objects. Iam facing similar problem while uploading delta load for 0MATERIAL.
Regards,
DippyHi
in source system, check whether your enhanced field is with hide check box ticked.
As soon as you add filed in append structure by default it is having that field is hidden. You have to uncheck it.
Then replicate the datasource in BW.
Now if delta is the issue that you are not getting ant record, that may be because there is no change in master data, delta will only bring records when there will be nay change in master data update.
So my suggestion is to crate a full repair infopackage, extract everything in to PSA and then load the data with FULL DTP.
I hope this will work.
Thank-You.
Regards,
Vinod -
Master data loads for Attributes and texts failing
Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
InderHello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder -
Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"
Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx -
Delta loads - for DB Connect and master data.
Hi there,
Would appreciate if any one clarify me on:
1) Are delta loads are possible as far as Master data is concerned?
2) What are all types of data loads (Initial/ delta/ Full)are possible as far extracting data from DB connect is concerned?
Thanks in anticipation.
Rgds,
A.
Message was edited by: AshHi Ash,
As far as I know, with DB connect you have the only option to have delta functionality - to use ODSs. Make full load from the source system to ODSs. Then update data targets from ODSs. During this update you'll have an option for init/full/delta load.
Best regards,
Eugene -
About delta loading for master data attribute
Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lotHi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani..... -
Delta Load on DSO and Infocube
Hi All,
I would like to know the procedure for the scenario mentioned below.
Example Scenario:
I have created a DSO with 10 characteristics and 3 keyfigure. i have got 10 Customers whose transactions are happening everyday. A full upload on the DSO was done on 7th October 09. How can i load their changing data's from 8th Oct to till date to DSO? and what will be the situation for the same in the case of Infocube??
Step by step guidance will be a great help
Thanks in advance
LiquidHi,
The key-fields take an important role at DSO level alone as you get the power of overwritting records. Once thats done at the DSO level you can simply carry on with a Delta load into the cube from your Change Log table and you don't have to worry about anything. Just to add, all the characteristics in the cube are key-fields so you will get a new records for each different value only the key-figures will sum up for a set of all the same characteristics.
Thanks,
Arminder -
I can not make delta load for some component of public sector management
Hello All:
I´am using these three data source 0PU_IS_PS_31, 0PU_IS_PS_32 and 0PU_IS_PS_42 and I realize that I can not make delta loads. When I make the full load everything is correct even when I made the delta, the problem is that the Delta load is not extracting any new data or changed data.
Do you have any idea to fix this issue?
Thanks
Message was edited by: Víctor OliveraHello Victor,
As u have already tried the delta load,I assume that u have already done the init load too.As system will not allow u to do delta load without doing an init load first.
The first datasource u talked about..31..it needs new records created in table FMIOI table.
What happens is..if u run a delta load immediately after an init load,there might not be new or changed records created in the system..therefore there arent any records in the delta queue.
Could u try creating some commitment document transaction data,so that records get added in FMIOI table.Then see if the delta queue for this datasource shows any records.
Links to BC pages for these datasources are below..
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c425e8afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c42618afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e1/46a53ec5f0c0428fa8b9cfcdcd9fcd/frameset.htm
Note that for 42 datasource..page says that delta update is not supported(though it does talk about updating delta queue).
For 32 datasource source tables are FMIFIIT and FMIFIHD.
For 42 datasource table is FMBDP.
cheers,
Vishvesh -
Is it possible to make a delta load for a Master data with Standard DS
I have a full load bringing huge data for master data with standard datasource.
I want to run a delta due to huge no. of records but when I create a new Infopackage it dont give a option for delta update.
Are delta loads specific to only standard or customized DS's or any other reason behind that ?I kind of understand what you are asking about, but I am unclear as to how it pertains to our BO SDK.
You are wanting to find the differences between a large dataset and another large dataset.
I am not sure what an Infopackage is.
Are you using the BO Enterprise SDK or some other product?
Jason
Maybe you are looking for
-
Hello Sapians, The T-codes FAGLB03 and FS10N gives the Balances of any GL account and also Cumulative Balances. The Balances are divided in to Credits and Debits Columns. 1. So for a period, can Credit column carry positive balance (for example 1000
-
Restricting the user to access only one view in or database
A user wants to create a database link , so that he can view one of our views. We want to restrict permission, so that he can access only that view, and not any of our tables. What is the best way to proceed? Thanks in advance, Gayatri
-
Where can I find a download accelerator?
Okay. I am new to apple so if I ask a stupid questions don't laugh. Anyways I really need a download accelerator. I live in Alaska about 100 miles away from a good internet connection. When using my old microsoft comp. I added the program Download Ac
-
Any easy way to apply equalization?
Due to high-frequency hearing loss (hereditary, not iPod-induced, BTW) I am having trouble hearing higher-pitched instruments played back on the new Shuttle. I know that the Shuttle's software does not have equalizer capability at present. I would li
-
The morning, I received the Reader XI update. When it was done, it said that there was a corrupt file and that it will not take. I unstalled it and downloaded Reader 10.1.4 and the XI update still comes up with the corrupt file. Now I cannot print