Delta not working in Solution Manager

Hi Friends,
I am developing BI reports for Solution Manager. The problem is I am not able to get Delta records from SM. Delta Queue is active in RSA7, the request is Green in BI. I get all the records when I do a reinitialization. Only Delta is not working.
I heard that the Queue CSA* needs to be registered SM. But I don't how to go abt it. Can someone help me with this.

Hi,
could you pleaes tell us how did you managed to solve this issue as I am facing a similar problem..
Regards
Puneet

Similar Messages

EWA report is not showing in solution manager 7.1 SPS10

Hi Experts,
I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a few seconds with job log content showing the error
Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
Please let me know any solution for this problem.
Thanks,
Bharat.

Bharat,
Note 1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1 should have most of the answers related to EWA
Also Make sure you add the system to active solution by using "Put in Solution".
"Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)" this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
-SS

Working on Solution Manager

Hi Gurus,
in our project we are having to work through solution Manager. I am new to the solution Manager environment.
a) Is there any link that helps us understand the basics of working on solution manager.
b) Also, i understand we need to give the transaction codes that we work on in solution manager. (But in HCM as we work in the IMG the transaction code is always seen as SPRO for most of the configuration)
c) How do we set the T Codes for entire configuration?
We have the sub modules
a) Personnel Administration (Recruitment Included)
b) Organisation Management
c) Time Management
d) Payroll
e) Personnel Development (PMS- OSA)
f) Training and event Management
g) ESS and MSS
Awaiting your reply and Thanks in advance
Regards
RR

The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
The concept is very user friendly and can be easily worked on. Thank you friend for your response.
i used solar 2 and was able to work further.
Regards
RR

Wily Introscope is not running in Solution Manager 7.1

Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
Hanuman

Hello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar

CRM Datasource-Delta not Working

Folks,
I am using CRM Standard Datasource 0CMS_RTCM_TRAN-Resale Tracking and Claims Management data..
I have enhanced this Datasource with four fields and transported to Quality system..
no problem with the new additions..Datasource is extracting properly..
but Delta update is not working..Delta Queue is not picking any records..but new transactions are getting updated in the respective source tables..
when i checked in BWA1- am getting these messages:
error message:
(121) MS_RTCM_TRAN: Table SMOXHEAD contains no BDOC name.
Warning messages:
(111) MS_RTCM_TRAN: No mapping found for extract field SLSR_ADDRESS_I..similarily for all the Datasource fields, its showing the same no mapping warning..
its working fine with Full update..but for Delta update am facing these issues..
Can you please explain what could be the reason for this and suggest a proper solution..
Thanks and Regards,
Yog

Hi,
Are there any transactions to change the BDOC name for Standard Datasources??..
In BWA1, when i tried to change these ADAPTER settings, i am getting this message:
"DataSource 0CMS_RTCM_TRAN cannot be edited with this transaction"..
i hope if i specify the BDOC name, Extraction should be happening..
so please suggest where i can perform these changes??..
Note : currently no extraction is happening because of this..
Regards,
Yoga

Delta not working after upgrade from 3.5 to BI7.0

Hello All,
We have recently upgraded from BW3.5 to BI7.0 and the standard delta is not working now after the upgade. The name of the Extractor is 0CRM_SALES_ACT_1.
Did anyone come across this problem before or can anyone suggest the solution.
Thanks
Madhu

Hi Madhu,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best Reg

Hi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman

Windows 8 Trackpad Not Working - Other Solutions Didn't Help

Hello all,
I recently installed Windows 8 Pro 64-bit on my Mid '09 MacBook. I had Windows 7 and 8 installed before and working, so I know it is compatible. Unfortunately, my trackpad does not work at all; No clicking, moving, nothing. I tried other solutions like changing the driver to the USB Input Device, but that will not work. I manually installed the 64-bit drivers from BootCamp v5. Here is a picture of my Device Manager: http://puu.sh/2Abyy
As you can see, I am missing drivers for my Coprocessor and an Unknown Device (Which I believe is my Trackpad, but it could be something else)
Thanks in advance for your help.

The update to boot camp is now available!
Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
http://support.apple.com/kb/dl1638
Boot Camp Support Software 5.0.5033
This solved the Trackpad Right Clicking issue (not working) as well as tapping.
The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

Extended VO working on one(emp) page, not working on another (Manager)page

Hi,
We are extended EMP Vo, and appied to EMP page, it is working fine.
And extended Manager VO(same as emp VO ), it is not working., while importing jpr command given msg as imported documents successfully, did personilzations but changes not effected to page.
EMP VO and Manager VO having same quries, but Responsibiltes are differ.
Can anyone provide solution?
Thanks,
Rakesh

Please refer the below link for profile options
http://oracleinme.blogspot.in/2009/08/how-to-enable-personalization-link-for.html
If you are just changing the name of the Prompt of the text field then you can do via personalization , if the changes are not
reflecting then try clearing OA Framework cache from Functional administrator and then test the application .
If you are working with the DFF fields then you can do it from controller extension , get the bean ID and set the value .
Keerthi

Advance Search not working in Document Management Task Flow

Hi,
We are using Document management task flow to manage UCM content. The simple search works for us but the Advance search does not work. Does anyone know of any possible reason why this could happen. Any hint would be really appreciated.
Thanks
Salim

Hi Srinath,
Thanks for replying.
So in my scenario when I try to search the content using the simple search which is present at the right hand top corner I get the search result properly. But when I try to search by clicking on the Advance link which gives me a option to search by Filename, Keywords and adding other filters, it always returns zero search results.
Thanks
Salim

Role based data visibility is not working in Round manager

I am looking for role based data visibility in Syclo round manager application where technician will see the data which is assigned to his name only (not all the data) I have created one custom role in SAP system and it's working fine .It's showing the below message :
Now I want to implement the same in syclo round manager .So I went to the SAP configuration panel and set the same user role on the security setting in class handler .Z_SYCLO_RM_ROLE is the custom role which I mentioned earlier .I tried with different option in this tab but it's not working .
Please let me know if I missed something to mention or is there any other process I need to follow .
Tags edited by: Michael Appleby

is not working Insufficient information. In what way is it "not working"? The page doesn't render as required? There's an error message? The browser crashes? The server room has been trampled into dust by a herd of buffalo?
>
I am unable to make it as page form / report.
v1 := v1 || ' ' ||'<input inline type =submit style="color:BLUE;background-color:RED" value='||c2.plot_id||'>';
...It is not possible to generate form elements in an APEX page in this way. The [APEX_ITEM API|http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_item.htm#CACEEEJE] is the only way to create APEX items in PL/SQL. However it contains no procedures to generate button items, so an alternative design is required in this case, e.g. a report with links.
(Also what is the intention of "inline" in the above code? [There is no *inline* attribute|http://www.w3.org/TR/1999/REC-html401-19991224/interact/forms.html#h-17.4].)

Enterprise not working in SAO manager

Hi All,
I have created a Enterprise Service in the Enterprise Services Builder. I added the source for the Enterprise service in the proxy (XML version) on the back end (ECC 6.04). When I test the service in the back end I get a response with data and when I test the Service in the NWNavigator I get a Response without data.
I have created several Enterprise service and only this one is not working. They are created the same way. When I look in the log file on the SAOManager I see that the service is executed correctly.
Has some one a solution!
Kind Regards,
Richard

Hi Gourav,
This is the wsdl url:
http://hostname:8000/sap/bc/srt/wsdl/bndg_E04711310A0E55F1A0E3005056B03D6F/wsdl11/allinone/ws_policy/document?sap-client=450
Kind Regards,
Richard

SOLMAN_DIRECTORY :Mass downloading of documents not possible in solution manager

We have maintained various solutions in solution directory under solution structure in solman 7.10 SP10 .
Tcode to access solution directory: SOLMAN_DIRECTORY
Various test cases and documents are stored under this structure.
We can only download single document at a time but we are unable to download multiple documents present in the documentation tab.
Everytime i try to export multiple documents we get below error 'Select one row' .
Can anyone please suggest a solution since there are lot of documents & downloading single document each time is really frustrating and time consuming.I tried with SAP KW, but its not working.
- Regards
Deepak

Thanks Vinod
I have already tried with SAP KW but its not working unexpectedly. I will follow up with our client for this.
Apart from SAP KW is there any other way by which we can perform mass download of documents in solman ?
-Regards
Deepak

Current versions are not availble as Solution Manager Logical Components

I'm settinp up a new Enterprise Portal server in Solution Manager EHP1. The portal server software is Enterprise Portal 7 running on NW 7.0 SR3. I cannot assign this server to the Logical Component SAP Enterprise Portal in Solution Manager because of a version mismatch.
Only two versions of Enterprise Portal are available in Solution Manager
1.) SAP EP 6.0 ON WEB AS 6.20
2.) SAP ENTERPRISE PORTAL 5
Why are these my only choices?
I cannot create a new logical component under SAP Enterprise Portal because with the correct version because EP7 is not available.

You have to select SAP Netweaver and under that you can select usage type Enterprise Portal.
After EP 6.0, SAP changed strategies and EP 7.0 falls under SAP Netweaver 7.0.
- Digesh Joshi

How to work sap solution manager

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. please search first. >
Hi experts,
can anybody what is the use of sap solution manger and how its work.
Regards,
arti singh

The SAP Solution Manager supports you throughout the entire life-cycle of your solutions, from the Business Blueprint to the configuration to production processing. It provides central access to tools, methods and preconfigured contents which you can use during evaluation, implementation and operational processing of your systems.
Features
Implementing and Upgrading SAP Solutions
     Central access to all tools for your project (Project Administration, Business Blueprint, Configuration, Test Workbench, create Group Rollout templates)
     Central management of all information for your Project (roadmaps, system landscape, project documentation)
     Compare and synchronize customizing in different SAP components
Solution Monitoring
     Central System administration
     Analysis of your system landscape with Service Level Reporting
     Real-time System Monitoring
     Business process monitoring
Services and Support
Access to programs and Services to monitor and optimize the performance and availability of your system landscapes, and minimize risks when running your systems
Service Desk
Solution support with workflow to Create and Process Problem Messages
Change Management
Manage change requests, with workflow to trace and audit changes and transports in your system landscape with Change Request Management.

Delta not working in Solution Manager

Similar Messages

Maybe you are looking for