Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

Similar Messages

How to extract the data by using function module?

hi experts,
what are the steps i have to fallow to extract the data from R/3 by using FUNCTION MODULE.
thanks & regards
venkat

Hi,
Extracting data from R/3 extract structure thru function modules
You can proceed with create function module using SE37, thereu2019s sample in system RSAX_BIW_GET_DATA_SIMPLE,
You need to know the logic how to populate the structure,
after that RSO2, create datasource specify extract structure and
function module,
activate and replicate to bw.
Chheers
Raj

Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Error while extracting the data

Hi All,
i am facing a problem while loading the data from the flat file to the DSO. i am working on BI 7. data is loaded to psa but all columns com under the one column. like this 10, jjj, a10, m10, s10, n. i know that i had made a mistake pls help me out.
Thanks & Regards
KK

Hi KK,
If it is a CSV file you need to select 'data format' as CSV... and 'data separator' as ',' in the extraction tab
Assign points if this helps.
Regards,
Anil

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Date problem while loading the data

Hi Guys,
When we are extraction the data from the DataSource 0CRM_SALES_ACT_1, it is giving an error for 0calday.
If the date is greater than 2012, it is giving an error. i.e., it is taking date upto 31.12.2012. If the date is greater than that date is giving an error as "date is later than factory calendar definition".
In that case we are modifying the date in the PSA and make date less than 2013 and loading the data.
Even we have done Transfer Global setting at the source system and we checked the factory calendar in SCAL tcode it is setup to 2098.
Can you please advice how to solve the problem when we are loading the date which is greater than 31.12.2012.
Thanks in advance
Jagan

Hi Jagan,
In the info package selections tab.
for 0CALDAY field give to value as 31.12.9999 and try loading you will get all the records
Regards,
Venkatesh

Creation of Generic Data source using function module based on the program which was used to created ABAP report

Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
Ravi

Hi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query

Problem in getting public holiday class using function module

Hi to all
I am using function module
HR_PERSON_READ_WORK_SCHEDULE.
for getting the employee's actual work schedule and public holiday class FTKLA.
But I am unable to get the correct public holiday class.
Please guide me.
How to do that.
Regards
Anubhav

Hi,
form build_work_schedule tables b_psp structure pdpsp
                                b_day_psp structure pdsppsp
                                b_employees structure pdpnr
                         using value(b_begda) like sy-datum
                               value(b_endda) like sy-datum
                               value(b_read_db) type c.
data: counter type i. "Note 495298
call function 'HR_PERSON_READ_WORK_SCHEDULE'
       exporting
            begin_date          = b_begda
            end_date            = b_endda
           grouping_dws        = motpr    "VEX Modif
           grouping_attendence = moabw
           grouping_substitute = mover
            read_from_database = b_read_db
            im_read_no_locked_records = 'X'                 "803380
       tables
            pernr_tab           = b_employees
            psp                 = b_psp
            day_psp             = b_day_psp
       exceptions
            error_in_build_psp = 1
            others              = 2.
read table b_employees with key error = 'X'
                         transporting pernr.
if sy-subrc eq 0.
    read table d3000_pers with key pernr = b_employees-pernr
                                           transporting name.
    if sy-subrc eq 0.
      message s582 with d3000_pers-name.
    else.
      message s582 with b_employees-pernr.
    endif.
endif.
Hope it helps you.

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Delta Problem while extracting the data by using function module

Similar Messages

Maybe you are looking for