Delta selection Issue

Dear All,
We are pulling 2 years data into Bi for OM 2LIS_11_VAKON. The selection is based on Doc Number. My problem is , if a new number range is created in the source, how can i fetch the delta for the same since we would have already started the delta for the selection made now.Please suggest and guide on the same.
thanks in advance
MAneesh Birthwar

As far as i understand you mean you have a delta in place and you load data to BW for a particular doc range.
Since you have a delta in place already for a Doc range and now that you are going for a new doc range ,all you need to do is delete the setup tables and fillup the setup tables for your new doc range. Once you fill up the setup tables, Just do an init in BW with data transfer for your new document range. By this you can ensure that you do not loose any delta data and your existing delta is not affected.
This is the case when you do not have any overlapping doc ranges.

Similar Messages

Menu selection issues in Flash CS4 for Mac

I'm having a few menu selection issues in Flash. It seems some fields are de-selecting automatically (and quickly). For instance:
1) When I double-click a layer to change it's name, it highlights then immediately de-selects. I can only rename by right-clicking and bringing up the Properties dialog.
2) Fields highlight briefly then immediately de-select in the Properties menu when using the Tab button to advance or cycle thru fields. I have to click on each field individually to enter dimensions/characters.
Possibly related...
On occasion, I'm having an issue in Photoshop where the tools are off by 30 pixels or so. Examples:
- Paint brush affects an area approximately 30px to the right and down from the brush head.
- Selection tool selects an area approximately 30px to the right and down from the arrow head.
This only happens on occasion and can be fixed by restarting Photoshop. I have not had any luck fixing the problems experienced within Flash.
I'm experiencing this on two different machines that have CS4 installed. My only guess is a conflict with a Logitech driver OR a Wacom driver, but I have uninstalled the software and unplugged the Logitech mouse and Wacom tablet to no avail.
Long time Flash/Photoshop user.... never had a problem like this.
Anyone else have these issues or know a fix?
Mac OS X 10.5.7
Macbook Pro & iMac
Logitech Control Center 2.7.0
Wacom Driver 6.1.1-2(RC) for Mac OS X v. 10.4 & 10.5

Hi there,
This is a known issue, however we have not been able to reproduce it internally. The way to fix it (assuming it's the same problem) is to change your workspace (such as resetting to a default shipping layout, and then modifying from there), as it seems as though something about the workspace is causing the problem. It could be very specific to where its layed out on your monitor(s), some exact pixel size of a panel and/or grouping - and so on. However, we haven't been able to reproduce this internally yet - only reproed and fixed similar problems - so I cannot say for sure, however changing the workspace has fixed it for the other users I've talked to seeing this one.
If you are able to share the following about one or both of your computers and send it to jdh (at) adobe, greatly appreciated:
* workspace XML file from the Configuration directory (before changing the workspace!)
* description monitor layout (ie: primary on left, secondary on right... or "one" )
* monitor resolution(s)
* screenshot(s) of your layout exhibiting the problem
Thanks!

Datagrid select issue

I am using flex builder 2.01 and have been using datagrids
for a while now. I have recently ran into a weird situation where I
have one datagrid out of three that just will not allow a manual
selection. If I set the index to 0 for instance, the initial view
of the datagrid shows the first item selected. If I go to select a
different item, the first item becomes unselected and no other item
can be selected. If I leave the initial state to be no item
selected, I can never select an item. All other datagrids are
working fine. I have tried to set selectable to true but that
didn't help. This is really odd, any assistance would be greatly
appreciated.

Mmmm... Well the good news is I fixed it. The bad news is I
have no clue why it fixed it. This particular datagrid is in a
different tab in a tabnavigator panel. Attached is the expanded
working code. On the line:
<mx:Canvas label="Archived" width="100%" height="100%"
id="ArchiveTab">
I had a click="{GetPropertyArchive()}" to refresh the data on
tab selection. This was old code that was made unnecessary at a
later date but I did not remove the code. My guess is the datagrid
assumed the characteristics of the parent tabnavigator and instead
of ... wait that can't be right. If that was the case then changing
the datasource would not have fixed the select issue because the
'click' definition on the tabnavigator still existed. I would
really like to understand why this mattered so I could avoid this
issue in the future. Any ideas??

Delta Initialization with different selections issue for Purchasing.

Dear Experts,
I have a scenario where in my source system i have data for Purchasing from April 07 to till date.
i want to report on Open PO value, so i planning to do the below.
1. As i don't want anything other than PO which are open for a certain Business area only (if i do this the data volume will be less)
i will extract as init only those open PO of that BU from April 07 to September 08. and after loading that i will load all the data for month of October 08 by way of init giving selection as october 08 to october 2020 so if any changes happen to the old po then the changes will come as i have already initialized them and from now on new PO and changes to PO from October will flow.
Is my thinking correct or else am i doing something wrong.
Thanks and regards
Neel

Hi,
If I remember correctly, the open PO is designated by 2 other flags don't recall them at the top of my head) and not by BU or date.
If you initialize by using dates and BU selection, its going to bring in all types of POs not just closed and moreover, you'll be losing out POs for other BUs.
I suggest you initialize the data for the whole of Purchasing and bring that to the EDW layer. Then from there you can create a reporting layer and put filters to extract the data only for open POs, or BU specific , etc.
The other way you could structure your design here is to bring in all the Purchasing data and then restrict it in the query to report only open PO, etc
You might require the other Purchasing data in future even if there is no requirement now and then you'll again have to reinit and you might want to avoid that.
Cheers,
Kedar

ISU 0uc_sales_stats_01 Delta extraction Issue

Hi All,
we have a strange issue.
We recently went through migration/conversion during which we did a reinit of 0uc_sales_stat_01.
I have re inited it on 10th then on every day it adds up the delta records starting from 10th till that date.
on 11th it brings 10 & 11th, on 12 it brings up 10th 11th and 12th etc,.,.
When i did analysis from my end i can see table DBESTA_BWTRIG which is used for initial selection of posting date & recon keys in standard extract.
Once mass billing, Mass invoicing happens i get entries in this table.
But these entries do not go away even after the data is extracted into bw.
I can see entries in this table against 0uc_sales_stats_02. i deleted the active version of 02 DS and checked but still the entries remain same.
What is the exact behaviour of this table DBESTA_BWTRIG? how is it updated and deleted or modified?
How do i identify what is the exact reason for this delta issue?
Is there any setting where i am missing in ISU?
Thanks & Regards,
Jana

Hey Steve,
have a look on Des Gallaghers Post in 0UC_SALES_STATS_01 data missing
He describes that one has to load at first in Full-Mode. You will also find a hint on table DBWESTA_BWPROT in IS-U. There will be the records with open reconciliation key which aren't be extracted because of that.

Generic Datasource Delta upload Issue

Hi all,
I have created a Generic Datasource for Solution Manager ODS 0crm_process_srv_h which contains the userstatus, transaction number, transaction desc and GUID of CRM Order Object (ods key field),only these fields.
I have taken transaction number as delta field and it is as timestamp. But delta upload is not happening. If I give GUID or Status also delta upload is not happening . Please suggest which is the best way to give to delta upload.
Thanks and Regards,
SGK.

Hi,
in your case you need to create a function module as a extractor. Create a extract structure as well and add a timestamp field (lets call it zdeltahelp) to be used as the delta relevant field of the datasource. After successful init the last extraction timestamp will be passed to the fm and you can start selecting all resb entries for orders created and/or changed from that time on as well as the ones deleted (but therefore you need to read the change documents as well). For more information about generic extraction using fm search the forum or check out my business card. There you will find a link to a weblog about that issue.
regards
Siggi

Delta load issue in COPA

Hi All
We are using COPA datasources and daily delta loads will goingon from source system R/3 without any issues.
last day the delta load from source system was failed due to some basis problem( non availability of WP) and we deleted that bad request in the DSO and then repeated the failed IP in the process chain,then the delta load was succesful but 0 records has been updated.
So we are missing that delta records,I guess this is due to the time stamp set in the source system.
In which table does this timestamp exists and what is the procedure inorder to solve this issue
How do I need to solve this type of issues.
Please let us know .,
Regards
Shankar

Hi Shankar........
I think u hav'nt make the QM status red.......when a delta load will fail............always make the the QM status red before repeating the load...........it will set back the QM status.........and when u will try to repeat the load.....system will ask for a repeat delta...........and a repeat delta will pick all the failed records along with the new records(if any).......
I think u should do reinit............ie.......
1)Delete the init flag
2) Fill the set up table with selection.........did u know which values r missed........any selection criteria..like date.......
3) Then do Full repair
4) then delta....
If u don't know the selection..............then u hav to load data for a selective range.........check ur DSO.....if the Update mode is Overwritten........then no probs.........otherwise there may be duplication of records.........then u hav to do selective deleteion........
Hope this helps......
Regards,
Debjani..........

HP Laserjet 2200dtn paper select issue

I have an HP Laserjet 2200dtn connected via jet direct with a direct ip. I can print to the device with one issue. All print jobs using the "Automatically Select" option for paper tray go to the manual tray and require me to tell the printer to continue. Prior to Snow Leopard the driver would go to the first available paper feed drawer (if paper was in manual it would go there, otherwise it went to either tray 2 or tray 3 on its on). Any Ideas? I would rather the printer automatically select tray 3 to print from and have me manually select tray 1 when I need it.
Thanks.

Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

[Wine] Sound card selecting issues

Since a month or too, after one of my weekly updates, wine started to select the wrong sound card for its audio playback. Thus, alas, no sound in wine applications.
When selecting the audio tab in winecfg, I get the following console output:
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
fixme:jack:JACK_drvLoad error loading the jack library libjack.so.0, please install this library to use jack
I don't use jack, so that can be ignored. The HDA NVidia - the S/PDIF on my NVidia video card I presume, I don't use either. What I do use is my onboard sound chip in combination with alsa, which works perfectly on non-wine applications.
So, I got the following set up:
$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: SB [HDA ATI SB], device 1: VT1818S Digital [VT1818S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ ls -l /sys/module/snd/holders
total 0
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec -> ../../snd_hda_codec
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_hdmi -> ../../snd_hda_codec_hdmi
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_via -> ../../snd_hda_codec_via
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_intel -> ../../snd_hda_intel
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hwdep -> ../../snd_hwdep
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_pcm -> ../../snd_pcm
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq -> ../../snd_seq
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_device -> ../../snd_seq_device
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_oss -> ../../snd_seq_oss
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_timer -> ../../snd_timer
$ lsmod|grep '^snd' | column -t
snd_hda_codec_hdmi 22593 4
snd_hda_codec_via 52963 1
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 21837 1
snd_hda_codec 74577 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6222 1 snd_hda_codec
snd_pcm 72321 2 snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 12 snd_hda_codec_hdmi,snd_hda_codec_via,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
Note that I already blacklisted snd_hda_codec_nvhdmi, which was in the above output before blacklisting.
Also note the weirdness of having two identical modules for card 0 and card 1. I guess the chip on the video card is Intel as well. I this possible?
Now the list of things I tried, all without a positive result.
First, I completely reconfigured my alsa set up.
Secondly, I blacklisted snd_hda_codec_nvhdmi in /etc/rc.conf
Thirdly, I used the info from http://wiki.winehq.org/UsefulRegistryKeys to force wine to use card0:
AutoScanCards=N
AutoScanDevices=N
DeviceCTL1=hw:0
DevicePCM1=hw:0
Fourthly, I edited .asoundrc to force alsa to use only card0:
# define soundcard to use, hw0:0
pcm.!default {
type hw
card SB
# device 0
# define control device to use, hw0:0
ctl.!default {
type hw
card SB
# device 0
Finally, I tried the above globally in /etc/asound.conf
I even waited two wine updates to see if that would fix it.
All above did not solve the sound issue and winecfg still gives the same error output as before.
Note that the sound works fine in everything, except in wine.
Anyone has any ideas or insight?

Hi!
Similar problem here
[zom@myhost ~]$ winecfg
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
fixme:winmm:proc_PlaySound Couldn't play header
fixme:winmm:proc_PlaySound Couldn't play header
[zom@myhost ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[zom@myhost ~]$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
I will follow some of your steps and research a bit to see if I can find something.
Please remember to post if you get it working!
Regards,
Edit:
Seems the card is not well specified in your /etc/asound.conf
% cat /etc/asound.conf
pcm.!default {
type plug
slave.pcm {
type hw
card 0
device 3
I think you should put the device also, as shown on your "aplay -l". Try and let me know (I will try asap).
Edit: Forget what I just said and just follow strictly the wine wiki page. In my case it was a problem when installing lib32-openal from the repos. It gave an error and did not install the first time, but I thought it was removed from the repos and wasn't needed anymore.
Last edited by Darkzom (2011-03-24 01:00:55)

F150- Free selection issue

Hi,
Dunning run is carried out only for a particular group of Industry (KNA1-BRSCH) in the transaction F150. It is not even selecting a single customer in the group when we consider it in the free selection. I have not ticked the exclude check box in the free selection tab when I consider the industry wise dunning.
But when we take individual customers and run then it is giving us the log.
please provide your inputs on this issue.
kind regards
sap student

Hi,
Please find length of the field KNA1-BRSCH in table KNA1 using transaction code SE11.
If industry value you enter in free selection (F150) is less than the character length defined for the field then you have to prefix it with Zeros.
For example if reconciliation account is of length 10 in table but your GL account length is 8 characters then you have to add two zeros before you GL account while using reconciliation account in free selection in F150 or F110.
Thanks!
Raju

Path Selection issue in Table Test

Hi All
I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
Can any one suggest why the Path is not selecting ...?
Appreciate your feed back.
Regards,
Sairam

Hi Deepu,
Please find the code below while doing text matching test
web.window("//forms:window[(@name='WIN1')]").verifyText(
"uniform", "365", Source.DisplayContent,
TextPresence.PassIfPresent, MatchOption.Exact);
Regards,
Sairam

Path selection issue

Hi All
I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
Can any one suggest why the Path is not selecting ...?
Appreciate your feed back.
Regards,
Sairam

Hi Deepu,
We are using OATS version 12.2, JAVA Version 6.0.350 and erp application is our own application developed in oracle 10g forms. We did not get any errors while installing OATS.
Regards,
Sairam

Web font selection issue in Muse?

Web font issue in Muse, when I load web fonts which have various weights i.e. regular and bold I an unable to select this font in any weight at all. Is anybody else experiencing this issue and has anybody got a solution?

Hi Zak
Just a quick follow-up after checking this issue at home. I opened Muse and loaded several web fonts, some of which had various weights available. I was able to select these fonts and change the weights fine. However I left Muse open and returned several hours later and found that I was unable to select any of these fonts.
So you workaround (turning Muse off and on again) certainly works but the bug is still there. FYI I am using the latest version of Muse on an iMac using Yosemite OSX. One thought, I have a screensaver set up on my home iMac, could this possibly cause this problem?
I will continue to monitor Muse on my iMac at work running on OSX Maverick to see if I get the same problem. I don’t have a screen saver set-up on this iMac as it’s never left long enough for it to start up.
This then may help determine if this is either an OSX Yosemite issue or a screen saver issue.
Kind Regards
Jeremy

Variable selection issue

can someone plzzz help me regarding the following issue..........
how to limit set of master data values in variable selection during query execution?
cheers
hari.

Hi,
check this link
it's for increasing the limit you can use it to decrease the limit.
BEX - number of displayed values
Thanks

Delta selection Issue

Similar Messages

Maybe you are looking for