Delta Setup/Link Broke After System Refresh in Sandbox with Prod

Hi All,
   We have done the System Refresh for Sandbox with Production in BW. After that, we tried to load 0FI_GL_4 Delta and it failed with 'Queue 0FI_GL_4 is not available in the Source System' in Monitor. It means something went wrong in System Refresh process and the Delta setup broke. The 'Status' traffic light for 0FI_GL_4 DataSource is in RED in 'BW Delta Queue Maintenance' (RSA7) in R/3 system. When I display this Status (Red traffic light) it says 'There are still no parameters available for the delta transfer'.
   Since the Delta link broke, I have deleted the 0VENDOR_ATTR Master Data DataSource in RSA7 in R/3 and Initialized the Delta in BW for this 0VENDOR_ATTR and it completed successfully and now 0VENDOR_ATTR Master Data DataSource in RSA7 in R/3 is in GREEN.
   But, we have GL InfoCube which has 120 million records and if we initialize the Delta it will take atleast 7-10 days. It will take atleast 2 weeks for all the InfoCubes and ODS's.
How could we restore the Delta setup/link and the Status of the DataSources will turn into GREEN in RSA7 in R/3, PLEASE ?
Thanks in advance.

Hi,
Ask your BASIS team to run BDLS. That should take care of the problem. It'll repoint the delta queues to the correct source system. With the refesh the delta DS will point to the system it was refreshed from, hence the problem.
Cheers,
Kedar

Similar Messages

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

Portal down after system refresh

Hello all,
We have done a system refresh for QAS from PROD for BI with export import of the backup into test. Everything was ok and refreshed BI is working fine but the SAP BI PORTAL is down. Nothing it is working. I can`t acces the link of the portal nor the visual admin nor configtool. Can you help us making the test working. I know a solution of reinstalling the portal with sapinst but i do not belive that this is the only solution.
The Test Portal have nothing changed. It is the same like it was but the BIT has changed a lot. Can anybody give some ideas how to make it work?
I give you some information found in logs:
dev_jrfc.trc :    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Tue Aug 24 09:21:56,809<
RfcException:
    message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=11 GWHOST=localhost GWSERV=sapgw11 PCS=1
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '127.0.0.1:sapgw11' not reached
TIME        Tue Aug 24 09:21:56 201
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2513
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     8
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
default trace: #2#================================== Connection ==================================
ID                            502279030649651208
Type                          QueueConnection
Mode                          STOPPED
isClosed                      YES
com.sap.jms.server.SynchronousNetworkAdapter@32af32af isClosed = false waitTableSize = 0 conectionId = 8----
ConnectionMetaData -
JMSVersion                    Version 1.1
PorviderVersion               Version 1.0
SupportedJMSXProperties       JMSXGroupID, JMSXGroupSeqJMSXDeliveryCount
================================================================================
#javax.jms.JMSException: JMS Service is stopped
SO we can`t acces Visual Admin and configtool.
Thanks in advance

So i have open both files services / hosts.. and everything seems to be ok. On services i found
sapgw11       3311/tcp      # SAP System Gateway Port
The servers are AIX and the DB si Oracle. Nobody changed these files for more than 2 years and before refresh oh QAS the portal worked just fine. Practically the problem is that there is no connection between BI TST and TST portal. Nothing even at unix level. I think the problem is soewhere between DB and portal.. because he can`t find any connection.
Some other log files:
database.1.log :
#1.5 #001A64E912A200310000003B001570BE00048E8BC8337BDA#1282630917258#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectConnection#######SAPEngine_System_Thread[impl:5]_27##0#0#Error#1#com.sap.sql.jdbc.direct.DirectConnection#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection beta:BIT:SAPBIPDB: code=17,002, state="null", message="Io exception: Connection reset";
SQL statement is "ROLLBACK".#5#17002#<null>#Io exception: Connection reset#beta:BIT:SAPBIPDB#ROLLBACK#
server0.log : #1.5 #001A64E912A200450000082C001570BE00048E8BC83E8D97#1282630917983#/System/Server##com.sap.caf.eu.cc.content.svc.CCServiceFrame#######SAPEngine_System_Thread[impl:5]_75##0#0#Error#1#com.sap.caf.eu.cc.content.svc.CCServiceFrame#Plain###Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl
javax.naming.NoInitialContextException: Cannot instantiate class: com.sap.engine.services.jndi.InitialContextFactoryImpl. Root exception is java.lang.ClassNotFoundException: com.sap.engine.services.jndi.InitialContextFactoryImpl
     at java.lang.Class.forNameImpl(Native Method)
1.5 #001A64E912A200680000003B001570BE00048E8BC82CCE12#1282630916813#/System/Security#sap.com/com.sap.workflow.j2eemoni#com.sap.engine.services.security#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.engine.services.security#Java#security_3031#com.sap.engine.services.security.exceptions.SecurityResourceBundle#Cannot get run_as identity for the security role "".#1#MBeanCreator#
#1.5 #001A64E912A20009000006CF001570BE00048E8BC83BC936#1282630917802#/System/Security##com.sap.engine.services.userstore#######SAPEngine_System_Thread[impl:5]_64##0#0#Info#1#com.sap.engine.services.userstore#Plain###Service userstore stopped OK#
Thanks

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

TMS, profiles after System Refresh

Hi All,
I have done a system refresh from PD1(old prod) to PRD(new prod) on new server.
I faced following problem after the refresh.
1. The instance profile of PD1 had many parameter.., after copying that in PRD, sap wont start. So I have commented many of those parameter from the instance profile of PRD?
2. After the refresh, since PRD doesnt have the transport request of PD1, how do I put those request to PRD?
I have the backup of \trans folder of PD1.
Regards
Prash

Hi,
Rename the file from \trans\buffer\HD1 to PRD worked!!!
-> the only concern if transport buffer is clean up in between then some request was missing in import queue of PRD.
zcsa/installed_languages = DE
this should be ED
zcsa/system_language = E is OK.
install/codepage/appl_server = 1100 -> this is for codepage installed on your application server
I get message like PXA_NO_SHARED_MEMORY occured
and SYSTEM_NO_ROLL occured..
-> are you using 32 bit OS ?
check Note 103747 - Performance: Parameter recommendations as of Release 4.0
Note 88416 - Zero administration memory management as of 4.0A/ Windows
also consider Note 129813 - Windows: Problems due to address space fragmentation
regards,
kaushal

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

No infopackages after system refresh.

Hello,
We have recently completed a system refresh from our BI production system to our BI training system for the first time.
Our customer then wanted us to link our refreshed BI training system to our pre-production ECC system. After some initial issues setting up the connections between the two systems we finally got a successful test connection in RSA1 from our BI training system to our ECC pre-prod system. We had our BI functional team test, they told us that they do not see any of the infopackages and that transfer rules for loading hierarchies from our ECC pre-prod system are missing. Does anyone know how this could happen and what we can do to resolve/get the infopackages into our training system ?
We are on BI 7.0 and ECC 5.0
Solaris OS
Oracle DB
Thank you,
Steve

Hi Steve,
I would assume you deleted the sourcesystems, as adivised by the system copy note (886102). When you delete the sourcesystems, all its dependant objects are deleted too (like the infopackages, for example).
You can get them via transport, as suggested in the scenario B3, from that same note.

Lost Bluetooth after system refresh 15-4010nr

With the whole 8.1 upgrade debacle, I had to wipe my system and start fresh. Now I just realized I have no bluetooth on my laptop. I'm mostly sure I had it, but I cannot find it on the device manager. Any idea where I can download the driver?
Thanks

Hello DrKrizzle,
I see you're trying to find the bluetooth on your Notebook after doing a system refresh. I will try to help you with this.
If the refresh has reverted the Notebook to Windows 8, you may use this link for the driver which should enable the bluetooth for you again. Intel Bluetooth Driver. If you have upgraded back to 8.1 after the refresh, there is currently no driver listed.
You may also use the HP Recovery Manger to try to restore lost drivers. Using Recovery Manager to Restore Software and Drivers (Windows 8).
I hope this is able to help you, let me know how it goes.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Unable to login in EP 6.0 after system refresh

After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.

Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish

How to handle the CRM Middleware after system refresh?

Guys,
We are using CRM 5.0 & R/3 4.6C. We have the middleware configured and set up. We finished all inital loads & delta loads are activated as well. The system works perfectly.
Now for some reason the client wants to refresh the R/3 system. (Basically they are copying over the R/3 Dev system to refresh the R/3 Sandbox system. Our connection is currently between the 2 sand box systems) What impact will this have on the CRM system? Will it cause mass delta downloads? I have already referred to notes 588701 & 765018. Any additional information or watch outs will be appreciated.
Secondly what's the best practice do a refresh in the future? Is there a SAP recomendation on how to go about with system refresh when CRM & R/3 are connected?
ARP

Hello ARP,
as always: It depends what to do:
a) do you have a CRM DEV System available? If possible you should get the connection working over there and then do a Landscape Copy of the R/3 DEV + CRM DEV to the Sandbox Landscape.
b) Let them copy the R/3 DEV to the R/3 Sandbox. Then use the Data Integrety Manager (Transaction SDIMA) to get the missing Customers, Transactions exchanged.
In the future they normally have to do a Landscape Copy.
Regards
Gregor

Windows 8.1 will not activate on HP19-2113w after system refresh.

Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Re-transport the transport request to NQA server after system refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

Amar,
Depending on how many tarnsports you have and also if this is one time, what you can do is ask Basis guys to write a small script which adds to the buffer to your NQA system.
Steps:
1) under /usr/sap/trans/buffer rename the NQA buffer file.
2) create a new empty file NQA (make sure permissions are identical)
3) Provide the list of transports and ask Basis team to put it in a file at Unix level
4) Run a script which will add to the buffer from the source file.
5) From STMS refresh the NQA queue and you should see all the transports ready for import.
Hope this helps.
Thanks,
Naveed
Edited by: Naveed Qureshi on Dec 4, 2008 8:52 AM

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

Adding transports to import queue after System Refresh

Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
Ravi

Thanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi

Delta Setup/Link Broke After System Refresh in Sandbox with Prod

Similar Messages

Maybe you are looking for