Delta update for the extractor 0FC_PAY.

Dear Friends,
I replicated the SAP ISU FICA extractors 0FC_PAY. However when i am trying the delta update it shows an error:
Error Message: 'Delta-Extraction for payments is not active'.
Please Help.
sinha_s

did you check the world wide web?
http://help.sap.com/saphelp_tm70/helpdata/en/6a/e8f2f0d32243fcb986e905a3d6b087/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/5d/5dafbea009436eb019bc863a74a004/content.htm

Similar Messages

The delta update for the InfoCube ZCUBE is invalidated

Hi BI Experts,
I am working on BW 3.5.
For the datasource 2LIS_13_VDITM there were some requests(deltas) missing for 3 days. So I got all the documents there were missing or not updated in BW. I deleted the setup tables and filled them with the new document numbers.
I did a full repair request from the Infopackage level and the data got updated in ODS.
But the DM Status is missing for all the requests in the ODS.
And the data for the full repair request didnt get updated in the Cube and I got the following error:-
The delta update for the InfoCube ZCUBE is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
And the following delta was also not successfull.. How can I clear up this mess and ensure smooth flow of deltas. How can I set the DM status.
Thanks
Kumar

Thanks for your reply.
When I did a Full Repair Request on the ODS the data is in the New table and the DM status got reset(vanished). And the following day delta got failed( data for that request did not get updated in ODS and Cube)
How can we bring back the DM Status and make the deltas successfull.
Thanks
Kumar

Delta update for generic extractor ?? Urgent!!!!

Hi All
In my project I am pulling data from 4 R/3 tables... I have created view & then Generic DataSource.
Can a delta update be set-up for the generic extractor based on adds/changes to the R/3 tables?
Thanks & Regards,
Sheetal
Message was edited by:
Sheetal Dhore

Hi,
Please take a look at the following doc.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Regards,
®

Delta support for the Generic extracter

Hello Roberto,
I have created the generic extractor (view-VBRK,VBRP) and it is working fine now i want to create the delta support for the extractor at R/3 side , please guide for the same .
Regards,
Milind

Hi Milind,
Under R/3, go to TCODE RSO2, you are presented with 3 options "Transaction Data", "Master Data", "Text". You choose which is the type of Generic Extractor you want.
There is a button labeled "DELTA" on the upper left corner of the screen. You indicate there which of the fields in your Extract Structure will be used as DELTA indicator or reference point.
You can choose either via Numeric Pointer, Timestamp, Calendar Day.
Hope that helps...
Do award some points if helpful...
--Jkyle

Resumable downloads and delta updates for App Store

Hi all,
since I didn't find any place where to add product improvement suggestions, I post it here and hopefully someone can point me (and or this post) to the correct location.
I'd like to vote for resumable downloads (even a shutdown is in between) and delta updates for the Mac App Store. The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
Thanks and regards,
Michael

Hi Michael!
Apple employees are not going to see feature feedback posted here, but you can use the Apple Feedbck site. There is not currently a category for the App Store but you can use the OSX feedback form here:
http://www.apple.com/feedback/macosx.html
The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
Curious, are you on dial-up or satellite? As I live in a low-population state with lots of miles between towns of even modest size, I hear the slow connection issue a lot when helping users locally. We get 50mbps service in Lewiston, but people in the back country are struggling with some really slow satellite providers.

Delta update for datastore is invalidated

Hi experts,
we're on SCM 7.0 and I'm trying to copy data from livecahce into a cube for backup. Have set up the datasource, dso and cube and this has been working. We had this process running with the data extracting to the cube all fine.
Something has happened to cause this error below and I'm not able to fix.
The delta update for the InfoCube DS_PAGGL is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
Procedure
Initialize your delta update again.
The data load to the dso work no problem but when it trys to transfer to the cube where it errors. it shows as a Repeat of the last delta in the type of data update. Request status stays yellow but if you call the monitor is shows as red with message above.
Error message no. is RSBM113
The dso is on a full update and the cube is on a delta.
I can't reinatialise this as when i call up the IP this option is greyed out.
I've deleted the update from the cube, dso and psa but when its rerun it comes up with the same error each time.
If we can't initialise, then what other options do we have?
Thanks
Edited by: Paul_111 on May 11, 2011 5:15 PM

Hi Venkat,
Delta request REQU_429VZAIHRVBTP2OUFU2AP8T4Q is incorrect in the monitor A repeat needs to be requested
This is bcoz, Your last delta from ODS to CUBE is not success full.
Just delete the initialization from ODS to CUBE and reinitalize with out data transfer. And pull the delta from ODS to cube after initialization. It will solve the problem.
Hope it Helps
Srini

Delta update for 0CRM_CN2P is invalidated

Hi Experts,
I am getting the same error from last three days while monitoring.
The error message is :
Delta update for 0CRM_CN2P is invalidated.
The delta update for the InfoCube 0CRM_CN2P is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
Please suggest , what will be the solution.

Hi,
Do a Full repair then again start the delta.
Some delta entry is missing either in source or target.
I hope it will help.
Thanks,
S

Delta update for 0FIA_DS11 is invalidated

Hi All,
The below description explain about the error that I am facing. But it is in the case of an Info cube that this description is valid. Now, I am facing this error when I am updating data into DSO, Info Cube from another DSO. I am performing delta update from DSO 0fia_ds11 to 0fia_ds12, 0fia_ds13 and Info cube 0fiaa_c11. Can anyone suggest if you know about this how to resolve.
Delta update for 0FIA_DS11 is invalidated
Message no. RSBM113
Diagnosis
The delta update for the InfoCube 0FIA_DS11 is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
Procedure
Initialize your delta update again.

Hi,
Have you checked whether the initialization was successful? Go to the info package and select Initialization options for source system and check initialization is successful.
It is better to re initialize the delta after deleting contents of the cube.
With Regards

BDoc error in Delta Update for CRM_SRV_IBASE_ATTR

Hi Gurus,
I'm having troubles with the delta queues in CRM 6.0 (2007) , I really appreciate if you can help me out.
I'm using the extractor CRM_SRV_IBASE_ATTR to get the installed bases. I have no problems with the INIT but at the moment of updating deltas there are always 0 records in the DELTA UPDATE, (even after creating new IBASE's).
I was cheking the transaction SMW01 and noticed that the BDocs are being created with status in RED (Incomplete), I guess that's the reason which I don't see any record (LUW) in RSA7 for this extractor and therefore the reason which I get always 0 records in the DELTA UPDATE.
The BDoc error message reads:
14.10.2008 14:36:18 Outbound call for BDoc type CRM_IBASE_MESS to adapter module CRM_UPLOAD_TO_OLTP failed.
Area: SMW3. Nº: 5
14.10.2008 14:36:18 Service that caused the error: SMW3_OUTBOUNDADP_CALLADAPTERS
Area: SMO8. Nº: 47
I've been reading SAP documentation but have no clue so far about this issue.
Have you got any idea about what could be happening? I really appreciate your Help...!!
I'll give you points.!!
Regards,
Carlos

hi,
The problem may be due to adapter object is set to inactive, while in administration console, the all business transaction mesg is subscribed. So try settimg the adapter object to active and re-process the bdoc.
after reprocessed the error bdocs, then automatically queue to BW started to piling up .
hope this helps you ..
Reagrds,
Shikha

Delta update for spend analysis fails

Hi,
I am using Spend Analysis in BI 7.0. The delta upload for this gives 0 records.
I have checked RSA7. The data source shows 0 records even though new records are available in the line item table. Delta field is TIMESTAMP.
The data source is delta enabled but still RSA3 does not allow Delta extraction test.
Can anybody tell me how delta is loaded for spend analysis data and why RSA7 is not showing any records.
This is a very urgent issue. Points will be rewarded for helpful answers.

hi venkat,
are you able to solve the problem? I got a similar problem like yours, not really familiar with delta updates with generic extractor.
If solved already can you share the solution? I am stuck after init delta, a little research indicate there's some V1/V2/V3 updates that i need to set in R/3 and also delta queue..
Thanks...
Heng Meng

Delta update for Info cube, How it will be works, what are mode to select.

Hi all,
              How delta update works for info cube, Generic data source delta update options are
              1) time stamp
              2) Calday
              3) Nemeric pointer
Please explain briefly delta update for infocube and delta init and delta update.
Thanks,
Gowda

Hi,
How delta update works for info cube
When you are updateing the data to cube from ods then data would extracted from change log their delta pointer get setup in the source request (in Source you can check the option beside the reqest says updated to target object.... it means the records are updated to target hence we would not update the same request )
Incase of PSA to cube Also in the PSA request get stamped as last updated .
Regarding Generic Datasource
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
Re: Extraction, Flat File, Generic Data Source, Delta Initialization
Regards,
Satya

Delta field for LO Extractor Datasources

Hi All,
Can anyone tell me how to find the delta field for LO Extractor. Because currently i am facing some problem in Delta like, if i do any changes in sales order in Item Level those changes are not reflected in RSA7. And the next change if i do it in header level i cld see the change along with my previos change being displayed. Problem is i dont find as seperate record for my changes in ITEM level.
Ex. x 3040404 001 oooo ppppp oooo hhhh kkkk
3040404 001 oooo bbbbb oooo hhhh kkkk - this is for header level chnage
Item level chnage: Not shown as seperate records
Next header change displayed properly as above.
Pls advise me this is a very urgent issue.
Thanks.
Bhu.

Hi Nagesh,
Thanks for your reply.
Onething to tell is i am handling diff clients. All my clients r using 3.5 except this client. Very Unfortunate. They r using 2.1c. Its long back i used this version
In LBWE i found they have only one update type i.e V3 update.
I have checked SM13 also. There is one update records for each change in header level data. Also this time i found when i change Route i found one update record. But not when i change Schedule line date.
Pls let me know if u need any further info. Anyideas welcome.
Cheers!
Bhuvana.

BI Query Statistic - Delta Update for 0TCT_C01.

Hi gurus,
I have installed certain Standard content objects (Infoproviders and respective queries). One of such infoprovider is 0TCT_C01. I donot have a process chain for this infoprovider, hence I load data every morning manually into this cube via a delta.
The number of records that come in with first delta run for the day is around 400 - 500. Yesterday, I ran this delta in the afternoon as well And I got 4 records in the update.
Now, this cube would have details as to how many times a particular query has been run, How many queries have been run for the day, what are the users etc.
My question is that when I ran the delta the first time in the morning, i got 450 odd records, but how come the count is so less when I ran it in the afternoon.
One thing I would mention is that there are a lot of users who use a lot many queries very frequently, so its would not be correct to say that only few queries have been run since morning.
Could anyone put some light on this.
Rgds,
Sree.
Edited by: Sree Nair on Oct 15, 2009 7:51 AM

No update,
So closing the thread

Delta update for ... is invalidated

I try to load my cube from another cube (as an infosource) via an ODS.
In the InfoPackage I select 'Full update'. Under 'Processing' I have checked 'Data Targets Only'. Under 'Data Selection' I have selected a limited set of data to load (one month).
When the loading process is finished, I get a popup message "Express document "Check Load from InfoSource 8ZOSACTCV" received..." When opening this document I read "Check Load from InfoSource 8ZOSACTCV , Packet Delta Package for Update by ODS ZOSACTCV".
The loading of the ODS is completed successfully. When monitoring the InfoCube loading process, I get a red light. The error message is "Delta update for ZOSACTCV is invalidated".
Both the ODS and the cube was empty before loading (although I first tried it with existing data in the cube). What is wrong? I see the request in the cube is called "Delta Package for Update by ODS ZOSACTCV". Why is it called a delta package when I requested a full load? Is this a part of the problem? I have tried "Delta Update" and "Initialize Delta Process" with "Initialize Without Data Transfer". I always get the same result.

Hai,
I understand that you are loading from Cube to ODS and then to another cube from this ODS. The data load from Cube to ODS is sucessful but the full load from ODS to Cube doesnot work. Is it?
Check few things below for load between ODS and the final cube:
1. See if there is any active initialization in the infor package. Go to your infopack and in Menu>Scheduler>Intilization option for source system.
If there is any delete it and try the load. A full load destroys a prior initilaztion.
2. If step is not the case, delete all the contents of the Cube and load. You can do this by hitting 'Delete' icon and 'delete all entries' or by right clicking on the cube and 'delete data'.
3. If even thats not the case, try to just load till PSA and then go to your PSA and simulate the upadte. See whats the problem is...you can find more details in the details tab screen in Monitor.
Let em know if these doesn't work. Provide me any other relavent information. We can work it out.

Delta update for 0FIGL_O02 is invalidated"

Hi Gurus,
I am facing the above stated message when i am loading the delta from ODS to Cube.
What happened.
we r deleted a request which is having data mart satus ok.
After that we reconstructed the same request into ODS.
After that the delta to cube from the same ods is giving the message like
"Delta update for 0FIGL_O02 is invalidated"
What i have to do in this case.
May i reinit cube.
Or any other way to solve this .
The data mart status for all requests in ODS is vanished.

Hi
See if the steps followed for delta are Init without data transfr, full repair and then delta if this is not the case follow the steps mentioned and if it is so u can do one more thing
do init with data transfer once again this will include each and every data but first delete the previous req of init. There is no need to do delta up till the time next delta comes after init with data transfer is done
Hope it helps Assign Points if applicable
Thanks
Puneet

Delta update for the extractor 0FC_PAY.

Similar Messages

Maybe you are looking for