Delta update from cube to cube

How will be delta calculated for Cube to cube load, as in case of ODS changelog table.
Thanks in Adv
Shrish.

Hi
Regarding Generic Extraction:
You can find the Safety interval in R/3 -> RSO2 -> Data source -> Delta. Generally if the delta is based on calday option then it is 1 day and for timestamp based it depends on the data load frequency.
this is from help.
Safety Interval Upper Limit of Delta Selection
This field is used by DataSources that determine their delta generically using a repetitively-increasing field in the extract structure.
The field contains the discrepancy between the current maximum when the delta or delta init extraction took place and the data that has actually been read.
Leaving the value blank increases the risk that the system could not extract records arising during extraction.

Similar Messages

Error when loading delta update from DSO to cube

hi Experts,
I am loading a delta DTP, get dat by requests from an dso to a cube, while doing that encounter an error :
"Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP,
include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 210). "
Any pointers ?
Thanks.
Sharat.

Hi Sharat,
We are getting the following error while loading data form DSO into InofCube.
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP, include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 231).
Message no. RS_EXCEPTION000
Please help us in resolving this.
Thanks,
Shalin

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Problem with update from ODS to Cube

Hi All,
I had an issue, when i was loading from ODS to Cube everything was fine except one data package failed coz of some object locked( User : myself, though i wasn't running anything else except this), but i check in SM12 no locks exist for that particular time.
apparently the load failed coz of this single package, its a load from ODS to Cube, so no chance of Manual update from PSA.
any suggestion: do i have to repeat that load all over again( sucks !!! it is for 40 mil)
Regards,
Robyn.

Hi Hoggard
Check the Job log fro ur Job in the SM37 and check for that Datapackage is there any thing failed liek
"ARFCSTATE-SYSFAIL" if this is there .. it means its an Deadlock .. please check the ST22 dump...
U can use the PSA...
1) go to the 8ODS infosource and copy the Delta IP
2) check the option in the processsing as Update PSA and the subsequently into the data targets
3) Schedule the IP manually
hope it helps
regards
AK

New field added to cube, delta DTP from DSO to cube is failing

Dear all,
Scenerio in BI 7.0 is;
data source -delta IPs-> DSO -
delta DTP---> Cube.
Data load using proces chain daily.
We added new field to Cube --> transformation from DSO to cube is active, transport was successful.
Now, delta from DSO to cube is failing.
Error is: Dereferencing of the NULL reference,
Error while extracting from source <DSO name>
Inconsistent input parameter (parameter: Fieldname, value DATAPAKID)
my conclusion, system is unable to load delta due to new field. And it wants us to initialize it again ( am i right ?)
Do I have only one choice of deleting data from cube & perform init dtp again ? or any other way ?
Thanks in advance!
Regards,
Akshay Harshe

Hi Durgesh / Murli,
Thanks for quick response.
@ durgesh: we have mapped existing DSO field to a new field in cube. So yes in DTP I can see the field in filter. So I have to do re-init.
@ Murli: everything is active.
Actully there are further complications as the cube has many more sources, so wanted to avoid seletive deletion.
Regards,
Akshay

Viewing the delta updates from a months of data

Hi experts,
i am loading the data as delta update everyday and once i fail to run the delta update.at the end of month client asks me to show the history of deltas for a month?where i can show the delta updates of a month?is there any tables for showing the delta updates ?

Hi,
I think it willbe in table ROOSPRMSC, here u can find out the time stamp of delta uplaods.
Regards-
Siddhu

Error in Data updation From ODS TO CUBE

hello Experts
We are working on BW 3.5
for FI GL line items we are loading the data to ODS and than to Cube.
earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload its giving Error
Value 'Ã
Â ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
thanks for replies

Hi,
Goto All Elementary Tests in RSRV
Goto Master data
Select the required test
Select your Infoobject
Execute the test
You will get the result with errors or no errors
If you get errors, then you click "Correct Error" button.
Regrds,
Suman

Data is not updating from DSO to CUBE

Hi Friends,
Can any one please Guide me.
Data is updating upto ODS but not from this lower level ODS to top of the cube from last week and displaying error as " Exception condition "DATE_INVALID" raised" .
How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
BR,
Venkat

hi
check the transformations between dso and cube, and check any inconsistence. if not then follow the link
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
this may help you.

Delta load from ODS to cube failed - Data mismatch

Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annie

Hi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie

Double Records in Update from DSO to CUBE

Hi,
I have a standard flow of DataSource - DSO - InfoCube - Multi Provider
The data in DSO is correct BUT the data in INFOCUBE is DOUBLED.
Question, could this be due to mis match of Key Fields ?
I only have a subset of DSO Key Fields in my InfoCube.
Could this be the reason

Hi,
once the DSO loads the request into infocube with some records.But the DSO wont be allowed to load the same request in second time. it transfer only '0' records.please check the request in Infocube.
if that cube have the double data you can delete data in Infocube after compression based on request Id. we can go for Reverse Posting. We can reverse post the data only when we process the data through PSA.
If u reverse post the data for a compressed request, the data for the compressed request is taken from PSA multiplying with -1 for the key figure values and loaded into the data target.Now the data in the data target is available in F table with negative key figure values.then Compression of Info Cube the data moves from F table to E table and nullifies the data in Infocube for the request ID.
Note: for deleting the zero key fig values by check mark zero elimination option in collapse tab.

Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

Delta update for Info cube, How it will be works, what are mode to select.

Hi all,
              How delta update works for info cube, Generic data source delta update options are
              1) time stamp
              2) Calday
              3) Nemeric pointer
Please explain briefly delta update for infocube and delta init and delta update.
Thanks,
Gowda

Hi,
How delta update works for info cube
When you are updateing the data to cube from ods then data would extracted from change log their delta pointer get setup in the source request (in Source you can check the option beside the reqest says updated to target object.... it means the records are updated to target hence we would not update the same request )
Incase of PSA to cube Also in the PSA request get stamped as last updated .
Regarding Generic Datasource
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
Re: Extraction, Flat File, Generic Data Source, Delta Initialization
Regards,
Satya

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

Delta Load failure from ODS to Cube

Experts,
After CRM upgrade, I had to reinitilized the delta process. In this, I reloaded ODS with first init delta without data and then delta load with new data created in CRM. This worked good so far. After this when I tried to load cube with init. delta without data, no issues. But delta load from ODS to Cube doesn't work. Does anybody have any suggestions, please?
Thanks,
Nimesh
Following error observed in Status for delta load from ODS to Cube.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been

Hi,
As far as i understood, you have successful deltas' loading to the ODS and you want to update entire ODS data to the Cube followed by daily delta's.
If this is the case,
Make sure that you have active update rules exist between ODS and Cube.
First goto your ODS and right click and select option 'Update ODS data in data target'.
Select Init update > IT will take you to the init info package where you select init <b>with data transfer</b> (Init with data transfer will bring all the records from ODS to Cube)
Once init is completed ,you can schedule to load delta's regularly form ODS to Cube by following the same steps.
Hope this helps
Praveen
Message was edited by:
Praveen Vujjini

Delta update from cube to cube

Similar Messages

Maybe you are looking for