Delta  update

hi guru's,
i m doing Lo cockpit extraction,in the delta i have loaded  100 records from setup tables, and the second delta is started what could be the status of those 100  records which are already in setup tables
thanks

Hi,
I think your post is unclear...
<i>hi guru's,
i m doing Lo cockpit extraction,in the delta i have loaded 100 records from setup tables, and the second delta is started what could be the status of those 100 records which are already in setup tables</i>
You have loaded 100 records for the DELTA?!?
Anyway, trying to decipher your post, I assumed you have performed INIT already and the extraction your are refering  here are DELTA Updates. Now you want to know what will happen if you performed Filling of Setup Tables with 100 records and you executed a DELTA Update?
Here are the facts:
1.) The contents of the SETUP Tables are only relevant during INIT and FULL Request. BW gets data from the SETUP tables if the request mode is either INIT or FULL
2.) Delta Request gets data from the extraction queue or should I say DELTA Queue from R/3 which have accumulated there by means of a periodic job or thru LIS technology that uses change pointers to extract DELTA Updates...
So in your case, the extractor wont get that 100 records from your setup table. It will extract data from the DELTA Queue/Extraction Queue (RSA7 and LBWQ) if theres any records there for DELTA Update.
Hope I have helped. If I did, please grant pts...
Regards,
--Jkyle

Similar Messages

  • Delta Initialization vs Delta Update

    We're having some issues with performance when loading our GL cube.  What I would like to do is perform many delta initializations, each delta inititialization containing one month/period.
    My confusion is in the fact that the last time I attempted this, when I subsequently went to run my delta UPDATE the same selection criteria was automatically inserted into my delta update.
    So for example my INIT may look like this;
    REQUEST1: Selection = 001.2005
    REQUEST2: Selection = 002.2005
    etc........etc...
    REQUEST12: Selection = 012.2005
    Next the UPDATE info package seems to inherit the same criteria... doesn't this mean it will not update anything beyond that criteria??
    I'm just wondering if it is possible to do an incremental initialization and still be able to enable delta updates for future periods?
    Thanks!

    Hi Patrick,
    The delta update will load the data as per the selections made in the Init run. A delta requested after several initializations, contains the sum of all the successful initial selections as a selection condition. This selection condition can then no longer be changed for the delta.
    Take a look here for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/content.htm
    Hope this helps...

  • Get back the Data mart status in ODS and activate the delta update.

    I got a problem when deleting the requests in ODS.
    actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
    - the request 132185 already retrived by the data target BP4CLT612.
    -Delta update in BP4CLT612 must be deactivated before deleting the request.
    - Do you want to deactivate the delta update in data target BP4CLT612.
       I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
    in the same it happened inthe 3 ODS's(3rd level).
    I got clear that if we load further data from source system. it will load all the records from starting.
    so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

    Hi Satish,
    U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
    Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
    Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
    To correct this..
    To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
    Do similar from L2 ODS to Cube.
    then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
    see below thread..
    Urgentt !!! Help on reloading the data from the ODS to the Cube.
    cheers,
    Vishvesh

  • How can i correct a delta update?

    Hi ALL,
    i have a delta update in an InfoCube that is failed the 28/07/2007 the processing is a procedure to load data from yesterday (27/07/2007) (after that date all deltas was finished correctly) i don't have an error message, in the status tab of the monitor i have: short dump in the warehouse, diagnosis: The data update was not completed. A short dump has probably been logged in BW providing information about the error.
    my problem is: there is a query bex based on a multicube that return no applicable data found and this cube is a part of the multicube.
    when i click on the manage menu on the cube in the Requests tab on the second column i have: Request for Reporting Available and in this column i have the query sign that request is availble for reporting until the date where i have the failed delta load. (i don't know if there is the problem affected my query Bex)
    one time i have seen somebody that was corrected a delta fail going in the monitor status tab clicking on the red light and after he set the set Overal Status to red (status not ok) but when you click save you get another popup ask you: set all updated requests in the ICs to this QM status?
    i'm blocked in this step because i'm afraid to make a many troubles in the Cube and i don't know if i choose yes if it will affect all the requests after my failed delta request.
    can Someone help me please???
    Thanks in Avance
    Bilal

    Hi Amit,
    1) the datatarget is being feed by one datasources.
    2) after the RED request in the data target i have 5 green requests, they use PSA and update subsequently in Data targets, but when i have checked the PSA today
    i see that i have only the data for yesterday and today.
    i don't have reference in PSA for the load that have failed 28/07/2007
    About the RED request:
    1) i don't have reference in the PSA for that request
    2) in the monitor of that request i have 661682 from 661682 Records
    when i check the Header tab in the monitor i have the processing: From PSA into data targets and the update mode: Full update
    when i click on the infopackage i have the processing tab: Only PSA and update subsequently in Data targets, the update tab is full update...i don't know why they give the name MA DELTA for the infopackage.
    i have deleted the RED request and the system had put automatically the next green requests like available for reporting ....i execute the query in this time return data but without value for the june's months ...i don't know if i have make a mistake to delete the requests or no!!!
    somebody have opinions
    thanks Bilal

  • Delta Update in data Target Must be Deactivated Before deleting the request

    Hi Experts,
    I got an error while deleting a request from an ODS target.  In breaf Let me explain..
    Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM  Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
    So I forcefully made the request red to delete the request from the targets. But  I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
       But the thing is , when I tried to  Delete the ERROR request from  the other two related Data Targets ( 0CRM_CN2P  and   0CRM_CNT1) , I fount these warnings..
                    --> Request 140522 already retrieved by Data Target BWPCLNT600
                    --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                    --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
       I clicked on YES.
    I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
    Thanks,
    Utpal.

    Hi shanthi bhaskar ,
    Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
       and  Shanthi, Won't be any problem as  I got the warning as mentioned above.. ?
    Thanks,
    Utpal

  • Problem with delta update on customised export data source.

    Hi all BW gurus,
    I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
    While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
    In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
    Does anybody have some idea on this?
    I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
    And how do others do for executing delta update of the customised data source?
    Thanks a lot!!
    The utility program of <Z_CHANGE_DELTA_PROCESS>:
    =================================================
    report z_change_delta_process .
    *P_DATAS DataSource
    *P_DELTAP Delta Process for DataSource
    parameters:
      p_datas type roosource-oltpsource,
      p_deltap type roosource-delta.
    tables:
      roosource.
    data:
      ls_roosource type roosource.
      if p_datas(2) ne 'Z_'.
       message 'The DataSource needs to begin with ''Z_''.'  type 'E'.
      endif.
    select single * from roosource into ls_roosource
           where oltpsource = p_datas
           and objvers = 'A'.
    if sy-subrc eq 0.
       ls_roosource-delta = p_deltap.
       update roosource from ls_roosource.
    message 'The DataSource has been updated successfully.' type 'I'.
    else.
       message 'The DataSource entered is not valid, try again.' type 'E'.
    endif.

    Doesn't anyone have any idea on this topic?
    Appreciate for all the help. Thanks.

  • How to Delta Update in Flat Files

    Hi all,
    I would like to know is delta update is supported in flat files ? If yes how does this work ..... is there a SAP white paper or document on this
    Thanks
    Nathan

    Hi......
    Yes Delta upload is supported by Flat files..........In this case........when the delta data records are loaded by flat file......... This delta type is only used is 'F'.......for DataSources for flat file source systems. Flat files are imported to the PSA when you execute the InfoPackage. The staging process then begins.........The delta queue is not used here.
    As Siggi already told in the Following thread......post your flatfile data to an ods object with update mode overwrite. The ods object will do the delta for you then.........
    Delta Upload for Flat File
    Also Check this.......
    SAP NetWeaver 7.0 BI: Data Transfer Process with “Only get Delta Once”
    SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / The “Normal DTP” ...
    Hope this helps........
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Nov 12, 2008 9:40 AM

  • WHEN WE GO FOR DELTA UPDATE  WHAT  HAPPENS IN R3 at same instant of time

    hi all
    when we go for delta update in bw at same time what the process takes place in R3

    Delta queue in R/3 T code is rsa7, the data comes to these tables before it is pulled in to BW. Nothing really happens in R/3 when you do a delta extraction. The delta queue keeps getting refreshed with the data for your next delta update.
    Thats my 2 cents
    SR

  • Deactivate delta update before deleting the request from ODS

    Hi all,
    Happy New Year wishes to all.
    I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
          I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
    “Request 98888 already retrieved by data target BWVCLNT”
    “Delta update in data target BWVCLNT must be deactivate before deleting the request
    “Do you want to deactivate the delta update in data target BWVCLNT?
    So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
    “Delta request is incorrect REQXXXXXXX in the monitor”
    “A repeat needs to be requested”
    “Data target still include delta request REQXXXXX”
    “If the repeat is now loaded, then after the load”
    “There could be duplicate data in the data targets”
    “Request the repeat?”
    After execute changes it is showing only “zero” Records only.
    What is that mean and why zero records it is displaying instead of delta records.
    Anybody faces this type of problem please let me know. This is somewhat urgent to me
    Thanks and Regards
    Satish Chowdary

    <i>Hi Satish,
    First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
    I hope this helps.
    Thanks,
    Krish
    Dont Forget to assign Points.</i>
    Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

  • 10.10.2 will not install - tried Mac App Store and Delta updater

    I'm trying to install the 10.10.2 update on a 15" MacBook Pro (Mid 2010) which currently has 10.10.1 on it and its not going well!
    The Mac App Store shows the 10.10.2 update, I click Update and dropdown says "Some updates need to finish downloading before they are installed. Your computer will restart to complete the updates." with the options "Not Now" and "Download & Restart". Doesn't matter which one I choose, after a click the update progress bar appears for a few seconds and then reverts back to displaying the Update button again. Have restarted, fixed permissions etc and it makes no difference.
    So I downloaded the Delta update (not the combo) and go through the install steps and the system restarts to compete the installation, but the system simple restarts and does not update to 10.10.2, its still at 10.10.1. Have tried a few times, always the same.
    One slightly odd issue is that the Apple remote Desktop update 3.8.2 appears to have been installed 5 times in the "Updates Installed in the Last 30 Days" section of the Mac App Store and yet it also still appears in the updates available section below the 10.10.2 update.
    I've repaired permissions, restarted, checked Activity Monitor for any non responding services and checked disk space availability - 170GB available. Can't see anything obvious.
    Anyone else having trouble installing this OS update?
    Thanks

    I have the exact same problem. Tried to install the normal and combo update. Nothing happens.
    I tried the repair permissions and even the reset password method. Nothing.
    Did the system restore help ? did you try to re-install yosemite first keeping your files and applications ?
    It's really weird.
    Thanks
    MacBook Pro 15" early 2011, OS X Yosemite (10.10.1), 16GB Ram

  • How to catch Delta Initialization and Delta Update in a Function Module

    Hi Experts:
    I'm developing a FM to extract data from R3. I wonder if anybody knows how to catch when i'm making a delta initialization and a delta update in my FM, because i have different parameters and routines from each one.
    Thanks in advanced.
    Points for helpfull answers.

    Hi,
    Keep one dummy date field in the structure. Make this dummy date field as delta enabled field. When you do Init load this date field value will be blank and next time when you do load it will have the last upload (in this case init load) date. You have to write a code before open cursor as below:
          LOOP AT s_s_if-t_select INTO l_s_select.
                                  WHERE fieldnm = '(dummy date field name)'.
             l_date = l_s_select-low.
          ENDLOOP.
    l_date will have the last upload date. This you can use to select the delta records from the table or for the further processing.
    If you want to check the value during Init or delta load, go to RSA3 and debug it(Don't use F - Full load. Use I or D in the update field).
    Hope this helps.
    PB

  • The DataSource ZGLOBAL_SPND still has no target system for the delta update

    Dear Experts,
    I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
    Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
    Source system is already created.
    For some of the datasources iam getting this msg.
    regards
    KV

    Hi,
    Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
    If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
    Regards
    Ram.

  • How to use Delta Update in InfoSpoke

    How to use Delta Update in InfoSpoke & to include in Process Chain

    Initialization / delta updates are what we do every day, and it is usually the update method of choice for most data targets. The delta mechanism ensures the consistency of transactional data. So if some data is wrong in the early stage of data flow, we have to not only correct the data itself but also the related records in subsequent data targets.
    Unfortunately, such data can't be avoided in daily extractions. In some situations, the data to ODS is correct but reports errors while loading from ODS to Cubes.
    Here is one example:
    Some FI documents transferred in R/3 with LSMW's background mode and one of the line items 'Negative posting signal' was inserted with 'x' while the right one should be 'X'.
    This line time stays cool in my ODS Z1CCWO01, but encounters errors while loaded into several Cubes when the process chain's running.

  • Can someone tell me how to delta update data from db like oracle?

    Hi gurus:
         as the title,can someone tell me how to delta update data from db like oracle?
    and can someone give me some link about the detail of delta update?
        thanks very much.
    chan

    Hi,
    Check help links
    Data Transfer with DB Connect
    http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
    http://www.bwexpert.com/downloads/DBConnectMakingDELTAABAPCode.doc
    Delta Concept
    http://help.sap.com/saphelp_nw04/helpdata/en/84/81eb588fc211d4b2c90050da4c74dc/frameset.htm
    Thanks

  • Last delta update is not yet completed

    Hi,
    in data loading we are facing problem, and the error is
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    today data is not loaded i have checked the data targets there are two error(red) records are there, so i deleted these red records diectly with out marking to red  even though records are in red.
    now i am repating the loading system is showing the above message.
    please help me how to load the data.
    Regards,
    Satya.

    HI Satya
       First make the status red in DSO or cube what ur loading by doing QM activity.Then goto monitor RSMO and then make the status RED.So only u can able to reload.If u didnt make the status red u will get the above message.
    Regards
    Arun kumar

  • Error in RSA3 - no target system for the delta update

    Hi friends,
    I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
    Regards
    Suyash

    Hi Suyash,
    First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
    Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you  check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
    Regards,
    Prakash

Maybe you are looking for