Delta Upload for Flat File

Hello Everyone
i am srikanth. i would like to know wheather do we have a facility for Delta Upload for flat file. If yes can u please give me the steps.
thanks in advance
srikanth

Hi Sabrina...thank you for ur help...i did load the data from cube to ods
steps.
1. i generated export data source on the cube
2. i found the name of the cube with prefix 8<infocube name> in the infosource under DM application component.
3. there are already communication structure and transfer rules activated but when i am creating update rules for the ods..i am getting the message 0recordmode missing in the infosource.
4. so i went to infosource and added 0recordmode in communication structure and activated but the transfer rules in yellow colour..there was no object assigned to 0recordmode but still i activated.
5.again i went to ods and created update rules and activated (tis time i didnt get any message about 0recordmode).
6.i created infopackage and loaded.
a)Now my question is without green signal in the transfer rule how data populated into the ods and in your answer you mentioned to create communication structure and transfer rules where in i didnt do anything.
b) will i b facing any problem if i keep loading the data into the ods from cube (in yellow signal) ..is it a correct procedure..plz correct me..thanks in advance

Similar Messages

Delta upload for flat file extraction

Hello everyone,
Is it possible to initialize delta update for a flat file extraction, If yes please explain how to do that??

Hi Norton,
For a Flat file data source, the upload will be always FULL.
Please refer to following doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0b3f0e2-832d-2c10-1ca9-d909ca40b54e?QuickLink=index&overridelayout=true&43581033152710 if you need to to extract delta records from Flat file. We can write routine at infopackage level.
Regards,
Harish.

Using Web Upload for Flat File in BW-BPS 3.5 Stack 13

Hi,
I am attempting to implement the "How To Guide Load a Flat File into BW-BPS Using a Web Browser" (the 7/2005 version). However, certain BSP files named in the How to Guide, such as "JS.htm" and "checkbrowser.htm" do not exist in my generated BSP application. We are on BW-BPS version 3.5 Stack 13. Is this guide compatible with this BW version?
Thanks,
Cynara
(Note: I have already attempted to correct the incompatibilities by changing the statement <%@include file="js.htm" %> to <%@include file="JS3.htm" %> and eliminating the code <%@include file="checkbrowser.htm" %>. However, I still get the JS3.htm error "field R_PAGE is unknown".)

Hi Cynara,
I try to do the same.
I left out those both lines and also the line concerning the style.
<link type="text/css" href="<%= cstyle %>" rel="stylesheet">
The upload worked then so far except that no data was written into the cube. Even if I press save button nothing happens.
Any ideas?
Regards,
Juergen

How to Delta Update in Flat Files

Hi all,
I would like to know is delta update is supported in flat files ? If yes how does this work ..... is there a SAP white paper or document on this
Thanks
Nathan

Hi......
Yes Delta upload is supported by Flat files..........In this case........when the delta data records are loaded by flat file......... This delta type is only used is 'F'.......for DataSources for flat file source systems. Flat files are imported to the PSA when you execute the InfoPackage. The staging process then begins.........The delta queue is not used here.
As Siggi already told in the Following thread......post your flatfile data to an ods object with update mode overwrite. The ods object will do the delta for you then.........
Delta Upload for Flat File
Also Check this.......
SAP NetWeaver 7.0 BI: Data Transfer Process with Only get Delta Once
SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / The Normal DTP ...
Hope this helps........
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 12, 2008 9:40 AM

How to allow users to upload a flat file to BW

Hi All,
For a planning application I would like to permit our users to upload a flat file on their local desktop to the infopackage and execute the load.
We would like to empower the users to prepare and upload their flat files into BW from their desktop without asking for BW support.
Please let me know if any of you have followed this approach.
Thanks
Karen

Hi,
The possible steps..
1. Create a small program and then give
Selection Screen:
FIle name : -
Note: Ask users give always same file name i.e. xyz.csv
Once user will give file name and execute it then file will save in Application Server (You fix the path like /usr/sap/BI1/DVEBMGS00/work, you create seperate folder in Application server)
2. Create a small Program with is using Events..
REPORT ZTEST_EV.
DATA: EVENTID LIKE TBTCJOB-EVENTID.
DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
      EVENTID = 'ZEVENT1'.
      EVENTPARM = 'ZEVENTPARAM'.
CALL FUNCTION 'RSSM_EVENT_RAISE'
          EXPORTING
            I_EVENTID                         = EVENTID
            I_EVENTPARM                  = EVENTPARM
          EXCEPTIONS
           BAD_EVENTID                            = 1
           EVENTID_DOES_NOT_EXIST       = 2
           EVENTID_MISSING                     = 3
           RAISE_FAILED                           = 4
           OTHERS                                    = 5
        IF SY-SUBRC <> 0.
                 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
3. Once user will upload the file in Step 1, then he need to run this Program,.
4. You craetea Process Chain using this Event, then once User will run this program then the Data Loads will happen through Process Chain.
Note: Eventhough this is lengthy process, it is protected 100%, because we are not giving any access to User, we just given reports/programs to execute.
Thanks
Reddy
Thanks
Reddy

Error message while uploading the flat file

Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshay

hi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

How to upload a Flat file into sap database if the file is in Appl'n Server

Hello Sap Experts , Can you tel me
" How to upload a Flat file into sap database if the file is in Application Server.
what is Path for that ?
Plz Tel Me its Urgent
Thanks for all

Hi,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
* Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.

Delta updates via Flat Files

Hello Guys,
We need to define the structure of the flat files we'll receive from our ETL team to specify how we'll manage the updates of the records we already loaded into BW.
We'll load those flat files through PSA then into an ODS that will feed an InfoCube. The records can contain new or modified characteristics and/or key figures.
I read a lot of documentation about deltas but I didn't find a clear answer regarding this subject for flat files:
Do we need to specify, for every single record in the flat files, if a record is either a new one, a modified one or a deleted one, or can the ODS figure that out by itself? I guess it can't (at least for the deletion part) so do we have to add an additional field to flag what type of modification (new, modif or delete) a record belongs to?
If we do have to add that information, can I just use ' ' for a new record, 'N' for a modified record and 'D' for a deleted record?
Thank you in advance (and don't worry, I'll reward you).
best regards,
SF

Hi Sebastien.
The answer really depends on what you types of records you are working with. If your record has a well-defined key (like a document number) and your ETL team gives you after-images of the changed records, you can set your ODS Object up with the same key and use Update Rules set to Overwrite. Then, the ODS Object change log will automatically provide delta-compatible updates to the InfoCubes.
hope that helps.
ADam

Time taken to upload a flat file in SAP BI

Hello Experts,
Want to know , about how much time it will generally take to upload a flat file in SAP BI having data volume near about 10 million .
OR what is standard time taken to upload the data from a flat file what ever be the size of the the flat file in terms of records ,
please provide me the detaild information regarding the time taken , plz clarify it , and thanks in advance

Hi,
there are some other points that you need to consider while trying to evaluate your question:
- how wide is your file/how many columns it has?
- what's the type of interface you using for flat file upload? is it: flat file loaded from user workstation? from application server? from web interface (like planning app)?
- how complex is login used to transform the data from flat file before data is saved in BW objects?
In general 10mil of records is not a problem is not a problem if you using upload from application server. If you using load from user workstation thsi can be an issue. Even less performant is load of that much data via web interface.

How to upload a flat file into a Z DB table

Hi All,
For a planning application I would like to permit our users to upload a flat file to a internal table to be persisted on to any given database Z Table. From here we would use it in a planning application.
Please kindly share the code and approach to implement this in BSP.
Thanks
Karen

Hi Karen,
Check the links mentioned below.
[Excel to internal table|Excel to Internal table in BSP;
[upload excel into BSP|upload excel sheet into BSP application;
The two links show how to convert an excel file data to internal table in BSP application.Similarly you can convert the flat file data to internal table and then modify the Z DB table to store the data from internal table.
Regards,
Anubhav

To upload a flat file into BW using a variable entry in web application

hi guys,
how to upload a flat file into the web browser using a
a variable entry in the wad application.
Thanks,
your help will be duly appreciated
Message was edited by:
Vj.R T

thanks arun
but is it not possible to load the flat file at bex level which
might be the same at wad level
and also what do you mean the load package
triggered from the backend and how do i
manipulate the data is it at bex level or wad level
please elaborate.
thanks
your help will be rightly acknowledged.

Golden Gate for flat file

hi,
I have tried with GoldenGate for Oracle/ non-Oracle databases. Now, I am trying for flat file.
What i have done so far:
1. I have downloaded Oracle "GoldenGate Application Adapters 11.1.1.0.0 for JMS and Flat File Media Pack"
2. Kept it on the same machine where Database and GG manager process exists. Port for GG mgr process 7809, flat file 7816
3. Following doc GG flat file administrators guide Page 9 --> configuration
4. Extract process on GG manager process_
edit params FFE711*
extract ffe711
userid ggs@bidb, password ggs12345
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
add extract FFE711, EXTTRAILSOURCE ./dirdat/oo*
add rmttrail ./dirdat/pp, extract FFE711, megabytes 20*
start extract FFE711*
view report ffe711*
Oracle GoldenGate Capture for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows (optimized), Oracle 11g on Apr 22 2011 03:28:23
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-11-07 18:24:19
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 4628
Description:
** Running with the following parameters **
extract ffe711
userid ggs@bidb, password ********
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 1G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.77G
CACHESIZEMAX (strict force to disk): 1.57G
Database Version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Database Language and Character Set:
NLS_LANG environment variable specified has invalid format, default value will b
e used.
NLS_LANG environment variable not set, using default value AMERICAN_AMERICA.US7A
SCII.
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "AL32UTF8"
Warning: your NLS_LANG setting does not match database server language setting.
Please refer to user manual for more information.
2011-11-07 18:24:25 INFO OGG-01226 Socket buffer size set to 27985 (flush s
ize 27985).
2011-11-07 18:24:25 INFO OGG-01052 No recovery is required for target file
E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, at RBA 0 (file not opened).
2011-11-07 18:24:25 INFO OGG-01478 Output file E:\GoldenGate11gMediaPack\V2
6071-01\dirdat\ffremote is using format RELEASE 10.4/11.1.
** Run Time Messages **
5. on Flat file GGSCI prompt-->_*
edit params FFR711*
extract ffr711
CUSEREXIT E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\flatfilewriter.dll CUSEREXIT passthru includeupdatebefores, params "E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\sample-dirprm\ffwriter.properties"
SOURCEDEFS E:\GoldenGate11gMediaPack\V26071-01\dirdef\vikstkFF.def
table ggs.vikstk;
add extract ffr711, exttrailsource ./dirdat/pp*
start extract ffr711*
view report ffr711*
Oracle GoldenGate Capture
Version 11.1.1.0.0 Build 078
Windows (optimized), Generic on Jul 28 2010 19:05:07
Copyright (C) 1995, 2010, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-11-07 18:21:31
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 5008
Description:
** Running with the following parameters **
extract ffr711
CUSEREXIT E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\flatfilewriter.dll CUSE
REXIT passthru includeupdatebefores, params "E:\GoldenGate11gMediaPack\GGFlatFil
e\V22262-01\sample-dirprm\ffwriter.properties"
E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\ggs_Windows_x86_Generic_32bit_v11
_1_1_0_0_078\extract.exe running with user exit library E:\GoldenGate11gMediaPac
k\GGFlatFile\V22262-01\flatfilewriter.dll, compatiblity level (2) is current.
SOURCEDEFS E:\GoldenGate11gMediaPack\V26071-01\dirdef\vikstkFF.def
table ggs.vikstk;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 1G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.87G
CACHESIZEMAX (strict force to disk): 1.64G
Started Oracle GoldenGate for Flat File
Version 11.1.1.0.0
** Run Time Messages **
Problem I am facing_
I am not sure where to find the generated flat file,
even the reports are showing there is no data at manager process
I am expecting replicat instead of extract at Flatfile FFR711.prm
I have done this much what to do give me some pointers.....
Thanks,
Vikas

Ok, I haven't run your example, but here are some suggestions.
Vikas Panwar wrote:
extract ffe711
userid ggs@bidb, password ggs12345
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
ggsci> add extract FFE711, EXTTRAILSOURCE ./dirdat/oo
ggsci> add rmttrail ./dirdat/pp, extract FFE711, megabytes 20
ggsci> start extract FFE711
You of course need data captured from somewhere to test with. You could capture changes directly from a database and write those to a trail, and use that as a source for the flat-file writer; or, if you have existing trail data, you can just use that (I often test with old trails, with known data).
In your example, you are using a data pump that is doing nothing more than pumping trails to a remote host. That's fine, if that's what you want to do. (It's actually quite common in real implementations.) But if you want to actually capture changes from the database, then change "add extract ... extTrailSource" to be "add extract ... tranlog". I'll assume you want to use the simple data pump to send trail data to the remote host. And I will assume that some other database capture process is creating the trail dirdat/oo
Also... with your pump "FFE711", you can create either a local or remote trial, that's fine. But don't use a rmtfile (or extfile). You should create a trail, either a "rmttrail" or "exttrail". The flat-file adapter will read that (binary) trail, and generate text files. Trails automatically roll-over, the "extfile/rmtfile" do not (but they do have the same internal GG binary log format). (You can use a 'maxfiles' to force them to rollover, but that's beside the point.)
Also, <ul>
<li> don't forget your "table" statements... or else no data will be processed!! You can wildcard tables, but not schemata.
<li> there is no reason that anything would be discarded in a pump.
<li> although a matter of choice, I don't see why people use absolute paths for reports and discard files. Full paths to data and def files make sense if they are on the SAN/NAS, but then I'd use symlinks from dirdat to the storage directory (on Unix/Linux)
<li> both windows and unix can use forward "/" slashes. Makes examples platform-independent (another reason for relative paths)
<li> your trails really should be much larger than 5MB for better performance (e.g,. 100MB)
<li> you probably should use a source-defs file, intead of a dblogin for metadata. Trail data is by its very nature historical, and using "userid...password" in the prm file inherently gets metadata from "right now". The file-writer doesn't handle DDL changes automatically.
</ul>
So you should have something more like:
Vikas Panwar wrote:
extract ffe711
sourcedefs dirdef/vikstkFF.def
rmthost 10.180.182.77, mgrport 7816
rmttrail dirdat/ff, purge, megabytes 100
table myschema.*;
table myschema2.*;
table ggs.*;For the file-writer pump:
+5. on Flat file GGSCI prompt+
extract ffr711
CUSEREXIT flatfilewriter.dll CUSEREXIT passthru includeupdatebefores, params dirprm\ffwriter.properties
SOURCEDEFS dirdef/vikstkFF.def
table myschema.*;
table ggs.*;
ggsci> add extract ffr711, exttrailsource ./dirdat/pp
ggsci> start extract ffr711
Again, use relative paths when possible (the flatfilewriter.dll is expected to be found in the GG install directory). Put the ffwriter.properties file into dirprm, just as a best-practice. In this file, ffwriter.properties, is where you define your output directory and output files. Again, make sure you have a "table" statement in there for each schema in your trails.
Problem I am facing_
I am not sure where to find the generated flat file,
even the reports are showing there is no data at manager process
I am expecting replicat instead of extract at Flatfile FFR711.prm
I have done this much what to do give me some pointers.....The generated files are defined in the ffwriter.properties file. Search for "rootdir" property, e.g.,
goldengate.flatfilewriter.writers=csvwriter
csvwriter.files.formatstring=output_%d_%010n
csvwriter.files.data.rootdir=dirout
csvwriter.files.control.ext=_data.control
csvwriter.files.control.rootdir=dirout
...The main problem you have is: (1) use rmttrail, not rmtfile, and (2) don't forget the "table" statement, even in a pump.
Also, for the flat-file adapter, it does run in just a "extract" data pump; no "replicat" is ever used. The replicats inherently are tied to a target database; the file-writer doesn't have any database functionality.
Hope it helps,
-m

How IE works for flat file

Hi all:
As we all know that, when IE gets a idoc's service name from SLD, then use it with idoc's message type and Idoc type to do receiver determniation, what about flat file ? how can we know its Service name and interface name if there is only a flat file on FTP? how IE works for Flat file ?
Couldn't thank you more

Hi,
For any idoc scenarious, you would use business systems rather than business service which is stored in SLD. So the IE would fetch it from SLD at runtime.
For file based scenarious also, you can create business system as type third party and use the same.
Is that answer your question?
Regards
Krish

When we go for Flat File creatin

Hi gurus,
When we go for flat file creation.Can any one give me one Scenario with example.
Thanks in advance

Hello Srikar,
How r u ?
We go for flat file in some scenarios like,
1. The source system could not be connected to the BW System (here u could generate a FlatFile)
2. If the Customer asks for a different kind of report (in our case we do FlatFile Creation for a complex time management - Employee Working Time is 1st merged with R/3 data, then we combine both together as 1 FlatFile)
3. Sometimes the customer will give the FlatFile data generated by them
4. We also take FlatFile reports from Data Targers, using InfoSpokes
More scenarios are there,
Best Regards....
Sankar Kumar
+91 98403 47141

Delta Upload for Flat File

Similar Messages

Maybe you are looking for