Delta upload full upload

Hi Gurus,
In ODS already delta is loading every half an hour. But, I don't see any data for one field in ODS. In that case, I want to load the data again to see if i can get the data? how can i do a full upload while delta is enabled? do i need to stop this delta and enable the full upload? or just full upload?
any help appreciated.
thanks

hi S.K.B,
i guess you enhanced business content datasource,
yes you need to populate the new added field in r/3
via user exit zxrsau01 (transaction data), take a look
sample code
Enhancement
User exit
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also weblogs on enhancement
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/ajay.das/blog/2005/03/28/custom-fields-in-standard-extractors--making-a-mixed-marriage-work--part-12
(http://www.ko-india.com/content/weblogs/weblog_custom_fields_1.pdf)
hope this helps.

Similar Messages

- Differences between delta and full uploads of transactional data

Hi All,
This is with refrence to the loading transactional data into the cube.
I know that delta and full uploads of transactional data into the cube is done for the following reasons.
1. Delta upload allows change in transactional data (add/delete/modify) for the particular period selected but this is not the same in full upload.
2. Full upload takes less time compared to delta upload for the particular period.
Please let me know whether my understanding is correct. Otherwise, please explain these two concepts with examples taking loading transactional data into the cube.
Regards,
Ningaraju

hi,
full upload is done to avoid more time to load the data .if u use initilallization then it will take more time to laod the same amount of data when compared to full load.
however your statement about the delta is correct.
u can perform delta only after sucessful initiallization.
so
1.first full load(to avoid more time0
2. inirtilallization with zero recored.
3. delta
regards

Generic Delta: Init, Full Upload and Deltas...

Dear All,
Last week on 10.04.2014 I've created "Generic DataSource with Generic Delta" and used CalDay as Delta-Specific Field and lower limit kept to blank and upper limit to 1. On 11.04.2014 I've initialized the Delta with Data Transfer using Process Chain: Time 1:15 p.m (Note: Posting was on)
see below screen shot:
Result: Process Chain was scheduled to immediate and it executed and initialized the delta and brought records as well. See below screen shot of RSA7:
Q: 1: Why generic delta current status is 10.04.2014, as I'v scheduled delta through process chain on 11.04.2014 @ 20:50: and why Total column is showing 0 records? Even I've checked Display Data Entries with Delta Repetition, but could not find any records?
Following is the InfoPackages which I created for Delta Loads and used in another Process Chain for Delta scheduled (daily @ 20: 50).
Following is the DTP used into Delta Process Chain:
On 12/04/2014 when I checked my InfoCube, and found that same number of records being loaded again despite InfoPackage and DTP were created as Delta, see screen shot:
On 12/04/2014 See below PSA table:
On 14/04/2014 when I checked InfoCube and I saw deltas being loaded successfully: see below screen shot:
On 14/04/2014 see below PSA table:
On 14/04/2014 see below RSA7 BW Delta Queue Maintenance screen shot:
Q: 2: Why am I unable to load the Delta records on the day(11/04/2014) when I initialized it with Data and why same number of records being loaded again on 11/04/2014?
Q: 3: On 11/04/2014, around 1:15 p.m I've initialized Delta with Data successfully and the same day (11/04/2014) was my first load of delta records (Time: 20: 50), could this be a problem? as the posting period was on when I initialized and I tried to load the delta on the same day?
Q: 4: Why the pointer is showing me Current Status: 12/04/2014 today and this time around I can find last delta records from "Display Data" option with Delta Repetition?
Q: 5: Have I missed something in the design or data flow?
Q: 6: How can I verify deltas records accuracy on daily basis; is it from RSA3?
or How can I verify daily deltas with ECC delta records?
Q: 7: What is the best practice when you load full data and initialized delta and schedule deltas for Generic DataSources with CalDay as delta specific field?
I will appreciate your replies.
Many Thanks!!!
Tariq Ashraf

I clearly got ur point.....But
If i have situation like ....." I loaded the LO data from R/3 with Init delta......then i loaded 5 loads of delta too.......due to some error in data now i am trying to load all th data......In this case if i do Full upload it is going to bring all the data till 5 th delta load .......If i do Init delta again it is going to bring the same data as full upload..........In LO while loading both Full load or delta init load we need to lock R/3 users....I believe we can load delta even after full upload by using "Init delta without data transfer"............So that wont be the barrier....then what is the difference or how should i figure out which load should i do.............If i am wrong please correct me.......
Thanks

Deltas and full upload

Hi all,
Let's say we have a scenario like this.
For document number 1001 and document item number 10,
the order quantity was 200 initially. This was transferred to infocube. Now, the order quantity changed to 180. I assume that in a delta upload, -20 will be transferred to the cube. But, for full-upload what value gets transferred to BW. Is it 180? If so, how does these values get tallied? I mean, 200+180=380. What really happens here?

hi Pooja,
initialize in infocube
doc no doc item order quantity
1001   10       200
change to 180 in delta upload, records in infocube will be
doc no doc item order quantity
1001   10       200
1001   10       -200
1001   10       180   (value in report = 180)
full upload
1001   10       200
1001   10       180 (value in report = 380)
hope this helps.

Delta and full uploads in the same data target?????

I have found that delta load and full update from different infopackages are getting loaded into the same data target that is ODS object. when do we go for such situation, can any one explain me in detail or give me some documents to know more about it.

Hi,
You have not clearly mentioned that those infopackages are ctrated on the same Datasource or not.
This way of uploading is very common when we need to upload some data from R/3 and some other data from Flat file into the Info cube. And GenerallyFlat file data would not be given in Before image and after image way, thats why we need to do full uplaod. The deleetion of already uploaded flat file data fromt he cube (before new upload from flat file ) depends up on whether the data to be uploaded from flat file system is always new data or not. And generally R/3 Extractor is capable of giving deltas, thats why only delta loads to the cube.
With rgds,
Anil Kumar Sharma .P

ODS optioin- Is it going to be full upload or init delta?

Hi frnds,
I got a query where the scenerio goes like this,
Data loading from ods to infocube. Let us suppose in ods settings, i have selected the option Update data targets from ODS object automatically. Then my question is whether it will be a init delta or full upload.....please explain the scenerio.
thanks in advance
regards,
dubbu.

Hi Vinit,
This will be dependent to the load in ODS,
if the load is init in ods the further upload will be init.
If the load to ods is delta the further upload will be delta
Reward if useful
Manish

Full upload misses records while delta brings them

Hi experts,
I'm using 2LIS_12_VCHDR extractor and with delta exctractions everything is worknig correct. The problem comes when I want to make a full upload. It is not taking the last records (while delta took them). It is not bringing records into BW since the exact day I reloaded the 12 LIS tables.
If I create a sales order, and this order is delivered, my delta infopackage brings it into BW, but my full infopackage is not bringing it.
Any clues?
Points will be given,
Thanks

My scenario is the next one for 2LIS_12_VCHDR:
- Full upload on Nov 13th (6 months ago) and it takes 170103 records.
- I make another full upload today and I obtain 107103 records (the same as 6 months ago, and there are a lot more).
- I make an init request > I create a delivery in ECC> I make a delta upload an it takes it.
- Then I make a full upload and it is not taking it. I still have 170103 records.
Do I have to reiniciate the 2LIS_12 in ECC (OLI8BW)?
In the other hand I have the 2LIS_12_VAITM working with delta every day. How it will affect to this extractor if I reiniciate all the 2LIS_12? I'm going to miss data? I'm going to duplicate data?
Thanks

I am running full upload daily now i want to load delta records how can i

Hi Gurus,
I am running full upload daily now i want to load delta records how can i do that could any body help recording this..
Regards
Kiran Kumar

Hello Kiran,
First make sure that you datasource is delta enabled. If so create a new infopackage for Init without data transfer and execute it. Then create a InfoPackage for Delta.
Thanks
Chandran

Datamart full Upload

Hi all,
FIGL , Inventory cubes loading with delta records in BI, whenever loading same data into SEM but it is not loading with delta, every time doing full upload only, but those cubes having huge data so it is impact on load , even i did init w/o after full upload but its not loading for delta, every time its loading the whole data from the both cubes. pl suggest me to do delta.
Thanks
Pinky
Edited by: pinky reddy on Apr 25, 2009 9:31 AM

Hi Pinky,
Could you check your info packages update tab strip whether it is in delta package or init package
Thanks,
Vijay.

Full Upload

Hi Experts,
Would like to seek assistance on this...
In the case of full upload to info providers what is the normal loading strategy?
Is it always delete the existing records[requests] before loading the records again.
I know delta is very straight forward that after initialization next step delta update takes care..
Pls advise.
Alok

Hi,
The stratagy depends on your data model and the type of data you are extracting.
If you are using ODS as a staging layer in BW, you need not delete the previous request.
If you are using any selections in info packages you need not delete the previouos full load request.
If you are not using any selections in info package and updating the info cubes, and the data contains some previously loaded records then you need to delete the previous request.
Hope this helps.
Praveen

Iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

You actually need to give information to get help - just stating an abstract problems (which is most certainly not a problem at all) gives the volunteers hearer nothing to work with to help you
What version of iPhoto? Of the OS? What exactly is the problem (iPhoto does support the resolution of your camera so that is NOT a problem)? what exactly are you doing? What error messages do you get? why do you incorrectly think that iPhoto does not support full resolution?
At this time your question is like my car won't start - why not? Could be anything from you did not put the key jun to being out of gas to having the engine stolen - no way to tell anything - except that the problem you claim is not true (at least in my example I would know that the car did not start)
LN

Full upload between ODS's

Hi,
I have two ODS Objects (ODS1, ODS2 both identical ). I am doing a full upload from ODS1 TO ODS2. ODS1 has approximately 2.5M records. Load ran well for a while and then it froze. I couldnt even open a new session nor execute a transaction.
Can some one send me a solution for this ASAP.
Can we do a full upload for a such a huge set of records.
Best Regards,
Ravi.

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - Job log can also be helpful.
Thanks,
JituK

Delta to Full load

BW gurus
I have ODS1 updating to ODS2, ODS3,ODS4 and cube1, ODS2 is updating to cube2.
All data targets are delta update.
Now if I change to full load for ODS1 only ,will be there any problem with data in ODS2,ODS3,ODS4,cube1 and cube2.
will the Delta functionality works for other ODS s and cube s ?
There are few reports on ods2, cube1 and cube2.
Will be there any problem?
Any advice greatly appreciated.

Hi Manoj,
If you change the Upload mode to Full Upload for ODS1. The final data in the Active table of ODS1 is not effected as the data which is already uploaded will be overwritten in Change log table.
The delta from ODS1 is always from Change Log table so the delta data from ODS1 to ODS2, ODS3 and ODS4 is taken from changelog table of ODS1. Because of Change Log concept of ODS the final data (Active Table) in these three ODS are not effected.
The delta to the Cube1 will not be effected as well. Because according to Cube's Delta management all the data in the full upload is Delta. Since the delta data is always taken from Change Log the volume of delta data from ODS1 to Cube1 might be huge but the final data for reporting is unaffected. ( This Delta to Cube will actually pick the Before Image and After Image records from ODS Change log. )
Also the delta from ODS2 to Cube 2 is not effected and all the reports on these Infoproviders gives the correct values.
Thus your change in Upload Mode does not effect any of the Cubes or ODS
Hope this helps...
Cheers,
Raj
Message was edited by: V.P.R

Need a single point of view on date selections for Delta and Full load IP's

Hi Experts,
Every year we are facing issues on date selections for data extraction, for example the Delta or Full selections for particular IP is like 2005 to 2008 , in this situation, for the year 2009, this IP is picking 0 records as the selections are upto 2008 only.
My requirement is, I need to check the selections of all the IP's in the system and want to change on need base if the selections are getting expired instead of going and checking manually to each and every IP as the system is having around 3000 IP's, which is a tedious job.
Guys, please let us know if there exits a Table/Program or any other way to check it.
Inputs appreciated.
Regards
Nandu

Hi
Persistent through module RSSM_SHIP_PSEUDO_DVERSION_WRI
Primary table RSLDPIOSH
RSLDPIO Links datasource to infopackages
RSLDPIOT InfoPackage Text Description
RSLDPRULE ABAP source code for InfoPackages
RSLDPSEL Hardcoded selections in InfoPackages
RSMONICDP Contains the request-id number by data target
RSPAKPOS List of InfoPackage Groups / InfoPackages
http://help.sap.com/saphelp_nw70/helpdata/en/2e/20d704d45be7458582cdfcc5487090/frameset.htm
Hope it helps

InfoSpoke Extraction Mode change from Delta to Full?

Hi,
I am having one InfoSpoke having Extraction Mode: Delta.
I am having one requirement from client that they need data from Same InfoSpoke with Extraction Mode: FULL from the period: 01.2007 to 04.2009.
Can i change InfoSpoke Extraction Mode from Delta to Full directly in the existing InfoSpoke? Will it impact any thing?
Please let me know.
Best regards,
Venkata

Hi Venkat,
It's better to create one more infospoke rather than changing the present Delta one.
As you see it may remove the Delta marker and further it may cause problem in delta extraction from infospoke.
Regards,
Ravi Kanth

Delta upload full upload

Similar Messages

Maybe you are looking for