Delta with Generic Extractor using function module

Hi,
I have created an extractor using function module and it work fine (mode FULL)
It's an extractor based on the FM RSAX_BIW_GET_DATA_SIMPLE.
In TCODE RSO2, I have specified a delta field (AEDAT).
In table ROOSOURCE, this extractor is defined by :
DELTA = AIE
EXMETHOD = F1
When I extract data in Init mode, there is no problem. But delta don't extract any entries.
When I trace with TCODE ST01, in Init mode the function module is executed but in delta mode, there is no trace of any use of this function module.
I don't know how to do to make this extractor work fine in delta mode.

Hi Pascal,
The same function module i have used and succesffuly doing delta using it. So it works for both full & delta.
How ur testing it and where are you testing it for delta.
Do the delta testing through BI end. Set the
As u have already set the delta field., now Follow below steps:
1. First set the safety interval upper limit to -1, so that it will extract the delta data of 1 day back records also.
2. Please make sure wether the delta records are available or not in r/3, if there is no records to be fetched in for delta then u will not be able to track out wether delta is working or not.
3. Now do the init from BI end first. Delta initialization without data transfer. - It will give u green status with 1 dummmy record.
4. Now do the delta. It will extract the delta records.
Before that make sure that if any selection your giving in Infopackage should be met out by these delta records.
Thanks
Dipika

Similar Messages

Delta fo Generic extractor using function module

Hi,
I am using the following function module for generic extractor but its always showing me extraction error.Could anyone please suggest to resolve the issue.
Thanks in advance fo rsuggestion.
FUNCTION Z_BW_SALESDATA_EXTRACT_CHNG2.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA OPTIONAL
*" E_T_SOURCE_STRUCTURE_NAME OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
The input parameter I_DATAPAKID is not supported yet !
Example: InfoSource containing TADIR objects
TABLES: VBFA,VBRK,tadir.
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
user defined variables.
DATA : X_UPDMODE(1) Type c, " Update Type
 X_LastUpdate Like Sy-Datum. " Last Update Date
 X_LastUpdate TYPE RODELTAID. " Last Update Date "TCS_KAP
Select ranges
RANGES: L_R_VBELN FOR VBAK-VBELN,
 L_R_AUDAT FOR VBAK-AUDAT.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
 buffer input parameters
 prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
 IF NOT g_flag_interface_initialized IS INITIAL.
 IF 1 = 2. MESSAGE e008(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '008' "message number
 ' ' "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDIF.
Check InfoSource validity
 CASE i_isource.
 WHEN 'Z_BW_SDDATA_CREATEON'.
 WHEN 'Y'.
 WHEN 'Z'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e009(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '009' "message number
 i_isource "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
Check for supported update mode
 CASE i_updmode.
 WHEN 'F'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e011(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '011' "message number
 i_updmode "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
Check for obligatory selection criteria
 READ TABLE i_t_select INTO l_s_select WITH KEY fieldnm = 'VBELN'.
 IF sy-subrc <> 0.
 IF 1 = 2. MESSAGE e010(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '010' "message number
 'PGMID' "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDIF.
 APPEND LINES OF i_t_select TO g_t_select.
Fill parameter buffer for data extraction calls
 g_s_interface-requnr = i_requnr.
 g_s_interface-isource = i_isource.
 g_s_interface-maxsize = i_maxsize.
 g_s_interface-initflag = i_initflag.
 g_s_interface-updmode = i_updmode.
 g_s_interface-datapakid = i_datapakid.
 g_flag_interface_initialized = sbiwa_c_flag_on.
Store Update mode in static variable...
 X_UPDMODE = I_UPDMODE.
 Select Single DELTAID
 Into X_LastUpdate
 From ROOSGENDLM
 Where OLTPSOURCE = 'Z_BW_SDDATA_CREATEON'.
 If X_LastUpdate Is Initial.
 X_LastUpdate = '19800101'. " The oldest..., this should not happen
 Endif.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
 APPEND LINES OF i_t_fields TO g_t_segfields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
 Following Calls FETCH only
X_UPDMODE = I_UPDMODE.
First data package -> OPEN CURSOR
 IF g_counter_datapakid = 0.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
 LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'VBELN'.
 MOVE-CORRESPONDING l_s_select TO L_R_VBELN.
 APPEND L_R_VBELN.
 ENDLOOP.
 LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'AUDAT'.
 MOVE-CORRESPONDING l_s_select TO L_R_AUDAT.
 APPEND L_R_AUDAT.
 ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
*added by Yogesh
 DELETE FROM ZBWSALEDATA.
*ended by Yogesh
 l_maxsize = g_s_interface-maxsize.
Check for supported update mode
 CASE X_UPDMODE.
 WHEN 'F' Or 'I'. " Full or Init
**get sales orders
 SELECT *
 INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
 FROM VBAK AS K
 INNER JOIN VBAP AS P
 ON PVBELN = KVBELN
 WHERE K~VBELN IN L_R_VBELN
 AND K~AUDAT IN L_R_AUDAT
 AND K~VBTYP = 'C'.
 IF I_SALESDATA[] IS NOT INITIAL.
 PERFORM F_GET_DATA. "get data
 PERFORM F_DEL_VATCOND. "delete vat conditions
 PERFORM F_GET_TAR_COSTUNIT. "get tariff cost unit
 PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
 PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
 PERFORM F_INSERT_DB_ZBWSALEDATA. "insert into table ZBWSALESDATA
 LOOP AT I_SALESDATA WHERE NETPR = 0.
 MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
 APPEND I_SALESDATA_FIN.
 ENDLOOP.
 SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
 DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
 COMPARING VBELN POSNR
 KSCHL.
 INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
 ENDIF.
 WHEN 'D'. " Delta
 SELECT *
 INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
 FROM VBAK AS K
 INNER JOIN VBAP AS P
 ON PVBELN = KVBELN
 WHERE K~ERDAT >= X_LastUpdate
 WHERE K~ERDAT >= X_LastUpdate+0(8) "TCS_KAP
 AND K~VBTYP = 'C'.
 IF I_SALESDATA[] IS NOT INITIAL.
 PERFORM F_GET_DATA. "get data
 PERFORM F_DEL_VATCOND. "delete vat conditions
 PERFORM F_GET_TAR_COSTUNIT. "get tariff cost unit
 PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
 PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
 PERFORM F_INSERT_DB_ZBWSALEDATA. "insert into table ZBWSALESDATA
 LOOP AT I_SALESDATA WHERE NETPR = 0.
 MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
 APPEND I_SALESDATA_FIN.
 ENDLOOP.
 SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
 DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
 COMPARING VBELN POSNR
 KSCHL.
 INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
 ENDIF.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E011(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '011' "message number
 I_UPDMODE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
**end get sales orders
 OPEN CURSOR WITH HOLD g_cursor FOR
 SELECT (g_t_fields) FROM ZBWSALEDATA.
 WHERE pgmid IN l_r_pgmid AND
 object IN l_r_object.
 ENDIF. "First data package ?
Fetch records into interface table. There are two different options:
- fixed interface table structure for fixed InfoSources have to be
named E_T_'Name of assigned source structure in table ROIS'.
- for generating applications like LIS and CO-PA, the generic table
E_T_DATA has to be used.
Only one of these interface types should be implemented in one API !
 FETCH NEXT CURSOR g_cursor
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE l_maxsize.
 IF sy-subrc <> 0.
 CLOSE CURSOR g_cursor.
 RAISE no_more_data.
 ENDIF.
 g_counter_datapakid = g_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
Best regards,
Yogesh

Dear Yogesh,
Try to debug the code by putting a break point at select statement...is the FM Syntactically correct ??
Check the Select statements..if all fields are not required avoid using Select * , and use always for all entries rather than JOINS..
Note : For Joins you have to specify the Fields in the Select...Dont use Select * ....
Hope it helps..
Thanks,
Krish

Generic Extractor using Function module with Complex Interface

Hi,
Has anyone created Generic extractor using Function module with Complex Interface?
What is the difference between Complex and Simple interface in Function module?
Pls explain.
Thanks,
Gopal

Hi,
Go through this link.....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
GTR

Create a generic extractor using Function module, what steps must I follow

Hello gurus team
I need to Create a generic extractor using Function module, what steps must I follow?
Just I have a function module not estructures or something, only the program.... and I have intented to do it in rso2 using the fm option, but give an error... somebody can helpme???
BR

Hi,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Thanks,
JituK

F1 & F2 interfaces in generic extractors using function module

Hi experts,
I created generic extractor using copy of function module RSAX_BIW_GET_DATA_SIMPLE with Delta capability. In ROOSOURCE, DataSource Extraction Method showing as F2. I checked In some blogs that we need to change the DataSource Extraction Method in ROOSOURCE table from F2 to F1 using test program . here my concern is:
1) What is meant by complete(F1) and simple(F2) interface, where our generic DataSource differs with this interface?
2) Do we need to change it from F2 to F1 in my case?
Many thanks,
Zakir.

Here is the difference between an F1 interface and a F2 interface (more importing parameters for the F1 interface):
Interface F1 :
FUNCTION BUPA_CCARD_EXTRACT_BW.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*"     VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*"     VALUE(I_S_TIMEINT) TYPE SBIWA_S_TIMEINT OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE RSONLYREAD OPTIONAL
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_BUS0CC_BW STRUCTURE BUS0CC_BW OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Interface F2 :
FUNCTION RSVL_CHARNO_GET_MASTER_DATA.
""Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE
*"                             OPTIONAL
*"             VALUE(I_INITFLAG) LIKE RSAAPI_IF-INITFLAG OPTIONAL
*"             VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE
*"                             OPTIONAL
*"             VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR OPTIONAL
*"       TABLES
*"              I_T_SELECT STRUCTURE RSSELECT OPTIONAL
*"              I_T_FIELDS STRUCTURE RSFIELDSEL OPTIONAL
*"              E_T_DATA STRUCTURE ROVERCHAR OPTIONAL
*"       EXCEPTIONS
*"              NO_MORE_DATA
*"              ERROR_PASSED_TO_MESS_HANDLER
The function module you copy (RSAX_BIW_GET_DATA_SIMPLE) seems actually more compatible with the F1 interface than the F2 (due to the I_REQUNR parameter).
So yes, I think you should switch your interface type to F1.
Regards,
Fred

Generic extractor using function module

Hi all,
We have created a generic extractor using a function module.
We created a new custom function copied from 'RSAX_BIW_GET_DATA_SIMPLE'. has been set as the delta date for this data source in transaction RSO2.The function module is a custom version of the FM RSAR_BIW_GET_DATA_SIMPLE.

Hi Anitha,
Please send your email id...
I will send the documnent to you.
My mail id [email protected]

Error occurred while loading Generic extraction using Function module

Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....

Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS    =
REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 10737418240                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM

Creating a Generic Datasource using Function Module

Hi Guru's
              We are tryin to create a Generic datasource using function module, we have found few old how to guides for doing the same but it is not effective and need to be altered. Can anyone suggest me the latest step by step procedure to create the above, also if you have the how to guide kindly paste the link as it will be a great help at this point.
Thanks in advance
Regards
Liquid

Hi,
Please goto the Following links :-
                                                                      PDF
1)         http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?quicklink=index&overridelayout=true
2)        http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
                                                 SAP Forum
3)        Re: DataSouce based on FM
4)       http://forums.sdn.sap.com/post!reply.jspa?messageID=10050614
5)       https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
6)       Re: Generic datasource with functional module
7)       Generic Extractor (FM based) - Delta Enabled
Regards
Obaid

Custom extractors using function modules

Hey all
Does anyone has a document regarding how to Develop Custom extractors using function modules?Step by step method would be great
Also document regarding CTS in BW?
Appreciate it
Thanks

Hi,
See here:
Generic Extractors
Generic data sources
Generic DS
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Best regards,
Eugene

Can anybody explain me creating Generic Datasource using Function module?

Hi,
can anybody explain me creating Generic Datasource using Function module?
Thax in advance,
Ravi.

Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " E_T_DATA " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
is an example
1.Create a function group .
2. Structure ZTEST123
ZMATNR MATNR CHAR 18 0 Material Number
ZMTART MTART CHAR 4 0 Material type
ZMBRSH MBRSH CHAR 1 0 Industry sector
ZMATKL MATKL CHAR 9 0 Material group
ZBISMT BISMT CHAR 18 0 Old material number
ZMAKTX MAKTX CHAR 40 0 Material description
3. Create function module (i.e. ZTEST.) .
FM - YMARA_DATA_TRNS
FUNCTION YMARA_DATA_TRNS.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZTEST123 OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
data : ZTEST123 type ZTEST123 occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX.
DATA: begin of t_mara occurs 0,
ZMATNR type MATNR,
ZMTART type MTART,
ZMBRSH type MBRSH,
ZMATKL type MATKL,
ZBISMT type BISMT,
end of t_mara.
DATA: begin of t_makt occurs 0,
ZMATNR type MATNR,
ZMAKTX type MAKTX,
end of t_makt.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZZMARA_DATA'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
select MATNR
MTART
MBRSH
MATKL
BISMT
from mara up to 10 rows
into table t_mara.
if not t_mara[] is initial.
select MATNR
maktx
from makt
into table t_makt
for all entries in t_mara
where matnr = t_mara-zmatnr.
endif.
loop at t_mara.
read table t_makt with key zmatnr = t_mara-zmatnr.
ZTEST123-zmatnr = t_mara-zmatnr.
ZTEST123-ZMTART = t_mara-ZMTART.
ZTEST123-ZBISMT = t_mara-ZBISMT.
ZTEST123-ZMBRSH = t_mara-ZMBRSH.
ZTEST123-ZMATKL = t_mara-ZMATKL.
ZTEST123-zmaktx = t_makt-zmaktx.
append ZTEST123.
clear ZTEST123.
endloop.
clear E_T_DATA.
refresh E_T_DATA.
E_T_DATA[] = ZTEST123[].
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extractio
ENDFUNCTION.
3. Create the data source using transaction (RSO2).
4. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter E_T_DATA.
5. Test the datasource in R/3 using transaction RSA3.
6. Transfer the data source to BW System and replicate it in the BW-System.

Generic Extraction - Using Function Modules

Hi Friends,
Can you pl let me know the step by step process for creating generic extraction using function module?
Thanks in Advance.
Regards,
Ari.
Please search the forum before posting a thread
Edited by: Pravender on Aug 5, 2010 7:31 PM

Hi,
Plz find this doc.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33.
And go this link...
http://www.sdn.sap.com/irj/scn/advancedsearch?query=genericextractionwithfunctionmadule
Regards.....KP
Edited by: kundan.sap on Aug 5, 2010 4:35 PM

Creating generic datasource using function module in R/3 4.6c

Hi,
I am not able to see the option (in TC RSO2) to create generic datasource using function module in R/3 4.6c. Is there any special plug in or some SAP Note to be applied to get the option ?
Waiting for a quick response.
Thanks and Regards,
Deepak

Hi Sat,
Thanks for the reply.
I know that creating generic datasource from function module is available in R/3 4.7.
In 4.6c version there are only two options available. They are Extraction from DB View and Extraction from SAP Query.
The third option i.e. Extraction from Function Module is not available in 4.6c. I wanted to know if there is any plugin that needs to be installed to get this option.
Thanks and Regards,
Deepak

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

Generic extraction using function module and view

hi every one ,
iam new to bw and can anyone plz tell me how to extract the data from R/3 to bw using generic extractor by creating function module and a view
thank u,
kishore

Hi Kishore,
Check this blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Also Check this doc:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Generic Extractors
Generic data sources
Generic DS
Bye
Dinesh

Generic data extractor using function module

Hi All,
I want to create a generic data extractor using a function module within the BW system. i.e. the extractor will run in BW and and store the data in a cube( in BW). No R/3 is invloved. I proceeded as follows:
1. Created a structure through se11.
2. Created a function module. But while defining "E_T_DATA" in the "Tables" section of the function module, I am getting the error "TABLES parameters are obsolete". I defined as follows:
E_T_DATA TYPE ZBW_EXTRACT
ZBW_EXTRACT is the name of the structure.
What should i do in this case ?
Thanks,
Satya

Hi,
I went to se80. Copied the function module "RSAX_BIW_GET_DATA_SIMPLE" to my function group. When i tried to change the associated type from "SFLIGHT" to my own structure, it again gives a warning that "TABLES parameters are obsolete!". It does not allow me to either save, check or activate the function module. What should i do ?
Please reply urgently.
Thanks,
Satya

Delta with Generic Extractor using function module

Similar Messages

Maybe you are looking for