Delta with reversal into cube from LO extractors

Hi SDN,
In our LO extraction design we have write-optimized DSO used as EDW as the first layer in BI. Then data is sent to Business Content infocubes, such as 0PUR_C01 though we are using their copies and instead of Update Rules/Transfer Rules, we are using PSA, Transformation, Write Optimized DSO, another transformation and onto the cube. DS and all other objects in the data flow are BI 7.
What we are not clear about is the role or ROCANCEL when passed to both STORNO and RECORDMODE and its impact on the cube after the write-optimized DSO. Some key figures are reversed for 'R' but others are not.
We had thought that 2LIS_02_ITM via a Write Optimized DSO will pass on STORNO and RECORDMODE to the cube which should have reversed all key figures in the cube if the value is 'R'. But it is not happening. Whatever key figures were reversed in the source system, they remained reversed, others are still there and adding another row in the cube with some positive values.
Can anyone shed light on this or provide reference to documentation regarding delta processing in the cube, especially from LO extractors like 2LIS_02_ITM, etc.?
Thanks
SM

Friends,
Thanks for the reply.
My question is more fundamental.
In 3.5 There was expected to be no DSO between Source system and the cube. How were the Update, add and delete handled then?
As I see it, write-optimized DSO is no hindrance because essentially the data is coming into the cube as if there was no DSO in the middle. I do not see SAP suggesting a DSO anywhere between the source and business content cubes, especially in our case dealting with 2LIS_02_ITM, SCL, etc. to handle delta.
Are you saying that no delta management is possible without inserting a DSO before the cube? Please realize that WO DSO only brings data request by request without any summation and overwrite confusion.
What I puzzled at is the lack of comprehensive unfied and detail information either in documentation or a blog.
Please advise.
SM

Similar Messages

Update data into Cube from 2 ODS

Hello Guys !
I have error in updating data from my 2 ODS to Mu infoCube.
I get this error :
10 records sent (0 received)
Any one have some idea why it doesn't work.

I have 2 ODS, I need to update my infocube with these 2 ODS.
on the ods context Menu : Update ODS data into Target ...
I get a Yellow Icon on the monitor.
on the details tab under Extraction, I get a yellow warning :
it says : 10 records sent (0 records received)
I'll check out the updates rules between ODS and my Cube.
thanks for your help.

Why can't I import sound with video into iMovie from digital camera?

This is disturbing. I have a digital video camera that took great video + sound. I import into iMovie (using my DV cable that came with the camera) and get video but no sound.
Now, in the past the sound came in, but no longer. Any and all advise is requested. I have to make number videos of lectures starting Wednesday evening and have to be able to provide video with audio.
Thanks.

Try importing video shot with the camera's internal
microphone. If that doesn't work either, the mic is
not the problem.
I have no problem importing sound with video when using the internal video camera mic. No problem (other than sound quality issues with the speaker being 40 feet away from the camera's internal mic!
But I can play back the video made with the external mic in the camera and the sound is stunningly clear, crisp and loud. It's just a matter of getting it out of the camera into my Mac. I don't think it's the microphone; it must be the computer.
I just find it sad to believe that Apple's software is so limited--even in Final Cut Express HD.

Interacting with the ssas cube from a web application

Hi All,
I have a requirement in which we are using a web application to show the reports designed in ssrs. As of now we are hitting the Database and getting the reports. But now we have developed a cube and we want to display the reports from ssas Cube.
My issue lies here. How to populate the filter drop down lists from ssas Cube ( how to read the mdx format ). Is there any way or work around to do it in ASP.Net..
To be more clear the report output will be from ssrs dashboard. Filters should be populated from cube.
Thanks in advance
Regards
Balaji - BI Developer

Hello,
You can use .NET AdoMd Client to connect to SSAS and to run MDX queries agains a cube; see
ADOMD.NET Client Programming and
Microsoft.AnalysisServices.AdomdClient Namespace
Olaf Helper
[ Blog] [ Xing] [ MVP]

Problems with accessing Essbase cube from Interactive studio

Hi All,
I have a report in IR for which essbase is the source. When i try to process the report i am getting an error as below.
Request [Report] from user[username] was terminated since it exceeded the time limit
Any idea on how this could be resolved ?

Probably query governors on the Essbase server, contact the Essbase DBA.
Hope this helps.
Andy King
http://www.analitica.co.uk

Explain full , inti , delta , with res to cube, ods , in 3.5 , 7.0

Naresh,
Most of your questions asked below are generic .. and many of them can be found by searching the forums , request you to search the forums before posting so that you can then ask specific questions and get relevant answers
Hi Gurus
give me the detail informatio about ,
1)Full , init , delat
in init we have some options , and also in DTP WE dont have init . plz give me the detail formation about
these things and in which scenario we go for these , and in 3.5 and 7.0
thanks in advance
Edited by: Arun Varadarajan on Feb 19, 2009 4:38 PM

Hi,
Go to the infosource tab in the RSA1 and search for 8(your infocube technical name).
Eg: if your source infocube 0tct_01 then search for 80tct_c01.
Create an infopackage on the 8.* ICtechnical name and schedule the load. This will load data from your source IC to Target IC.
If it is not clear please let me know.
Thanks
Santosh R C

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Can not reboot into OSX from Windows using Bootcamp assistant

I'm having a bit of a problem with rebooting into OSX from Windows on bootcamp. Clicking on the icon in the system tray produces a message that Windows can not find the OSX disk. Trying to open the Bootcamp preferences also generates an error. I have no problem getting back into OSX if I shut down Windows and restart the MacPro while holding down the option key. This is with a Windows 7 install on Bootcamp, but I had the same issue with a previous install of Win XP. I nuked and paved OSX and the WIndows disk between installs so my current problem is not carry over from the XP install.

My bad I should have been more clear. The problem is actually with a XP install via bootcamp, my Win 7 install is in VM Ware Fusion.
The XP install is on a second drive. Since you asked about this I'm assuming it may be the reason Im having problems.
The error is I get when trying to access bootcamp via the Windows control panel or by right clicking the sys tray icon is - "An error occured while trying to access the start up disk settings. You may not have privileges ...blah, blah, blah. I only created one account and I have enough privliges to change admin stuff in windows so I cant see privliges being the issue. I reassigned the OSX partition a new drive letter and rebooted windows but this didn't help.
The only drivers I installed, other then updating the video driver, are the bootcamp drivers
Sys tray icon - small diamond shapped icon in systray for accessing bootcamp functions.

Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

ABR complete delta with deletion flag via delta queue (cube compartible)

Hello
DS 2LIS_04_P_COMP is delta enabled with ABR complete delta with deletion flag via delta queue (cube compartible)
Is it possible to use this type of delta for ods? If yes , what kind of changes are required
Thanks

Hi
ABR means
A - After Image
B - Before Image
R - Reverse Image
Since updating DSO is usually in overwrite mode it requires After Image.
So u can use the data source with ABR delta to load into DSO (ODS).
Cheers.

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

Error encountered while loading data into an Essbase cube from oracle DB

Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
Priya

The error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Emergency! Please Help. I have an iPhone 4 with all my pictures from the vacation on it and I plugged into my computer and it sync'ed to my ipod. all of my pictures are gone. How do I get my pictures back?

Emergency! Please Help. I have an iPhone 4 with all my pictures from the vacation on it and I plugged into my computer and it sync'ed to my ipod. all of my pictures are gone. How do I get my pictures back?

If all you did was sync your phone, and if you haven't synced again since this happened, you can restore your phone from the backup that was created at the beginning of the sync process (camera roll photos are included in the backup). If you have synced again since this happened this backup has already been overwritten and your photos are lost. Also, if you restored your phone from the backup of your iPod, rather than just synced, then your photos are lost too.
If you have an intact backup that contains these photos, do the following:
Without connecting your phone, open iTunes on your computer and go to Preferences. On the Devices tab check "Prevent...from syncing automatically".
Connect your phone to your computer, right-click on the name of your phone when it appears in iTunes on the left sidebar and select Restore from Backup, choose your most recent backup to restore from.
When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing.

Delta with reversal into cube from LO extractors

Similar Messages

Maybe you are looking for