Delta2 Platinum - Error installing Ethernet drivers on WinXP SP2

Hi guys, I have a problem with installing Gigabit Ethernet driver for my Delta2 Platinum... It says that the drivers cannot be instaled because the name is already used... I've tried new drivers for nForce and nothing... Help me please...

You need to uninstall the existing ethernet drivers first before installing the drivers for the giga-lan.

Similar Messages

IPod Nano Black 1gb error installing ipod drivers

Hi there i just bought an IPOD Nano Black. My problem is that i want to install the drivers for the ipod but i'm getting an error: 1608: Unable to create InstallDriver instance, Return code: -2147024894
I don't know what to do can anyone help me with this? Thx in advance

I tried already --> http://consumer.installshield.com/kb.asp?id=Q108440
but it didn't work

How to install audio drivers for xp sp2 on intel based macmini

Processor Name:
Intel Core i5
Processor Speed:
2.3 GHz
Number of Processors:
1
Total Number of Cores:
2
I hv installed WinXP SP2 with help of refit.Bootcamp only allows Win7.Graphics fine.No audio.Tried drivers from bootcamp given by Apple,didn't work.Pls help.
Thanks in advance.

serial # should be printed on the CD .....

Vox USB 2.0 Drivers for Winxp SP2

Hi,
Could someone please direct me to newest drivers for The Vox USB 2.0 WinXp SP2. All I've been able to find are the same drivers which are issued with the included CD. I've searched on the forum, MSI site and on this FTP site;
[please do not post MSI FTP links - Stu]
This Version: msi pvs3.0 beta2 2005225.zip <--- could not find
Stus Version: MSIPVS Test 3.0 Build 079.540 <--- coud not find
Thank You,

the most recent drivers are these ones here:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=536&kind=10
there are no later versions

Errors Installing Nvidia drivers

Good evening all.
I just finished installing Arch Linux today and I am looking to install a GUI now. Although I am having trouble downloading the drivers.
The graphics card in my laptop is the NVS 5400M. It is a part of the NVC1 (GF108) codename.
Following the wiki, I use the following:
# pacman -S nvidia
Many, many errors appear, the last of which being:
"warning: failed to retrieve some files
error: failed to commit transaction (download library error)"
I have traced it down to be something wrong with either my mirrors, or my DNS is not resolving any hosts.
Is there any way to reconfigure my network, if this is the case?
Please tell me if I need to post more information.
Thank you all for your help.

theotherroom wrote:I might try to connect with ethernet
This is probably the easiest way.
The relevant interface is the one starting with enp.
At least the wireless interface(s) seem(s) to be already properly recognized, on my MacBook it was not.
Btw, can somebody say, what the difference between wlp* and wwp* is?
If you want to establish a wireless internet connection you should probably have a look at the wiki.

Error installing motherboard drivers

I recently had to format my hard drive and reinstall Windows XP. When I use the download from HP to reinstall my mother board drivers I keep getting an error: "Application failed to initialize properly (0xc0000135)." in the error window that comes up after I close that message I get: "1800: Error opening file/pathToInstall=FileGet(filename,""). Winbatch 32 2009B. WILversion: 6.09bib." When I do a "Traceback" it shows: "291 pathToInstall=FileGet(fi...instll.wbt)
After I clear my screen of all the error messages the winow showing that, "Lightscribe System Software" is in progress. But nothing happens except the little green bar keeps going round and round and round. How do I fix it or how do I find the drivers that will install?

Most reinstalls require the motherboard drivers at first step. The chipset drivers first of all. I would wipe the install and try again. Without the model number it is difficult to give good advice.
BTW: what are you using to install WinXP? If you use the Recovery DVD set or the Recovery partition, that will also solve any reisntall problems.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Installing 10g R2 on WinXP SP2 NL gives ORA-19870, ORA-19612, ORA-06512...

I'm trying to install version 10g R2 on the following configuration:
ASUS K8V SE board + AMD 64 Athlon + 512Mb Ram + 160GB SATA HD + 18GB IDE HD Windows XP SP2 NL
When I install 10g without creating the db then it installs without problem.
If I try to create the db (afterwards or during install) I get the following errors:
(Translated from Dutch to English)
ORA-19870: Error by reading backup part C:\ORACLE\DB10G2\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB
ORA-19612: Data file 3 is not fixed because of missing or corrupt data.
ORA-06512: IN "SYS.X$DBMS_BACKUP_RESTORE", line 5149
ORA-06512: IN LINE 16
I get the option to ( Ignore ) or ( Abort )
Ignoring brings other simular problem and at the end I dont have a database.
The files are on the HD and are readable, even installed from a second download gives the same errors.
I have tryed several things even disable BitDefender 9 internet security but nothing helps.
Can someone give me some hints ?
Thanks in advance

Hi damorgan,
Thank for your reply. I try what you say at the first time but it's failed because of missing file. If it is successfully installed for you, I will try it.
For me I ignore the database config process and end installation. After that I create successfully my database by orace configuration and migration tools > database config.
Regards.
Edited by: dialaya on 27 avr. 2010 14:58

Error installing SQL Compact 3.5 sp2 on 2012 64-bit server.

Sql Compact 3.5 sp2 will not install on 2012 64-bit server. I'm getting an error that the replication components need to be installed for Sql 2008. My Sql Server is at sp1 (11.0.3393) and is replicating currently to another Sql Server.
Both 64 and 32 bit installs gives me this error.

First, you need the latest tools, build 8089, download links here:
http://erikej.blogspot.dk/2010/08/sql-server-compact-35-sp2-downloadable.html
And secondly (I assume this is a 2 server configration, with separate IIS and SQL Server?) - you need to install the 2012 database engine as well, to get the replicaation components installed (just stop and disable the SQL Server service after install, so
it does not consume any unneccesary resources)
And thirdly, SQL 2012 SP1 is not enough, you must install the latest CU, both on the IIS server and on the database server.
Let me know if that was unclear.
Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

Installing BIPublisherDesktop.exe on WinXP sp2 with Word2007

Hi all,
I am trying to install BIP wth word2007 and getting an error:
Please close MS Word and try again
but nothing is running....
What do I do?
Thanks,
Eugene

Pff I had this one in the past as well... but don't know what was wrong anymore.
But first try to restart your computer and if you've done that and it isn't working, try to reinstall the software?
You also got a program called Template builder for word.. you can try if that solves the problem

ITunes 8.2 won't install on WinXP SP2 64bit

Installed my new computer (WinXP SP2/ 64bit) updated via Windows Update and tried to install iTunes 8.2 for Windows (64 bit). My system meets the requirements for this version, according to the Apple iTunes page. At the beginning of the installation I get the error "This installationprogram of iTunes requires a 64bit version of Windows Vista."
Yes, I checked if my Windows Updates are all up to date.
Maybe I cannot read, but on the downloadpage of this version, it says clearly that a Windows XP SP2 should do.
So I tried to install the 32bit version, which worked for the installation. The only problem is that my iPhone nor iPod will be recognized when connected. That gives the error "Install this version in a 32bit OS".
I like to install the 64bit version, but I don't see what I am doing wrong??

I am also having a similar issue. I can install earlier versions of iTunes, 7 and earlier, however, my iPod is only compatible with iTunes 8 or later. When trying to install it on my custom machine with XP Pro x64 on it, I consistently get messages recommending to install the 64-bit version (which is only compatible with Vista), or at the end of the setup initialization I get an error message saying I need to have Service Pack 2 or better. I keep my machine fully updated at all times so I KNOW I have SP3. I have tried multiple times reinstalling the service packs just to make sure I'm not crazy and the Microsoft update site isn't lying when it says in my update history that I have in fact installed ALL updates available. No change whatsoever. Does anyone have a link to a fix for this? Getting incredibly frustrated trolling forum after forum looking for an answer, and talking to clueless customer service reps that don't know what I'm talking about half the time...
Thanks in advance,
Chris

I installed bootcamp 4.0 4033, installed window 32 bit but can't install the drivers for some reason i keep getting error message. i have a macbook pro mid 2011 version. Please help

I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac. Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install. I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit. I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5). Also, my bootcamp assistant is version 5.. I have no idea if that matters. Help please.. been searching online for hours.

What model/year is your Macbook Pro? What operating system version?

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MSIExec error when re-installing printer drivers

Hello,
Recently I had to uninstall and install again drivers for my printer since Windows went crazy and did not let the printer accept Word document to print. But when installing it shows MSIExec error (image below). I tried to uninstall all the printer goodies (apps and help center), tried to clean registers manually with regedit and tried to change data USB connector. No success.
Since I live in Czech Republic, use czech version of Windows and czech installer, the text shows in czech. The important is below.
What's that error kind of and what does the return code mean? How to fix it?
Using printer LaserJet 100 color MPF M175a on Windows 7 Ultimate 32bit edition...
Please, help quickly, I need to print some important document...
This question was solved.
View Solution.

Hey @Polda18,
Generally the error 'an install operation took too long to execute' is related to system files on your actual computer. There should be no reason you would need to increase the RAM on your computer. Cleaning up the registry is not a bad idea but I'm going to suggest a few more steps first under your normal User Account.
Step 1: Install Using HP Smart Install:
1. Press the Power button or switch to turn off the product, if it is not off already.
2. Disconnect the USB cable from both the product and the computer, if you already connected it.
3. Press the Power button or switch to turn on the product.
4. Reconnect the USB cable to the product and to the computer
The HP Smart Install program should start automatically. Follow the on-screen instructions to install the software.
Should this also fail, please proceed to the next step.
Step 2: Disable Smart Install:
On the front panel of your printer select the 'Setup' button (the wrench)
Under the Setup menu right arrow over to Service Menu and select OK
Under Service Menu right arrow to 'Smart Install' and select OK
Under Smart Install please turn OFF this feature and select OK
Once Smart Install is disabled, proceed to the next step.
Step 3: Run a Selective Startup on the Computer:
Click on your Start menu and in the 'search programs and files' box type msconfig and hit enter
A System Configuration Utility box will now open. Under the 'general' window select 'Selective Startup' and only uncheck 'Load Startup Items'
Click on the 'Services' tab at the top
At the very bottom select the checkbox for 'Hide all Microsoft Services'
Select 'Disable All' on the right
Select Apply and then OK and restart your computer when prompted
Step 4: Run an SFC /SCANNOW:
This is a scan that will run on your computer. Should it identify any system corruption it will tell you. Should the scan request that you insert your Operating System disk it does indicate that you have a corruption of your actual computer and your Operating System will need to be reinstalled.
Go to your Start menu and type CMD
CMD will populate as an option above, right click on this and 'run as admin'
When Command Prompt opens type sfc /scannow and hit enter
Allow the scan to complete and take note of any errors it may fine
Restart your computer once the scan is complete
Step 5: Run Windows Updates:
Please ensure that all your Windows Updates have been completed.
Open Windows Update by clicking the Start button , clicking All Programs, and then clicking Windows Update.
In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer.
If any updates are found, click Install updates. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Install Windows updates
Once these steps are complete try to install your software and drivers again. Please let me know if these steps resolved the issue. Should you end up getting any other error messages please let me know. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Remotely installing enic drivers via pnputil results in timeout error even though it is successful

This is a followup question to my previous post regarding an error I was getting using pnputil remotely
http://social.technet.microsoft.com/Forums/windowsserver/en-US/05116983-7de5-4987-919d-d0032c65c0bb/remote-use-of-pnputil-results-in-invalid-inf-passed-as-parameter?forum=winserverpowershell
I was able to get the script working copying the files locally then installing. Basically I'm doing:
if (!(Test-Path -path $DestinationFolder)) {New-Item $DestinationFolder -Type Directory}
Copy-Item -Path $SourceFNIC -Destination $DestinationFolder
Copy-Item -Path $SourceENIC -Destination $DestinationFolder
Invoke-Command -ComputerName $servers -ScriptBlock {pnputil.exe -i -a "C:\temp\fnicwl64.inf"}
Invoke-Command -ComputerName $servers -ScriptBlock {pnputil.exe -i -a "C:\temp\enic6x64.inf"}
The fnic installs no problem & reports back. The enic, understandably, loses connection temporarily while the driver updates. It then sits at: Processing inf:
enic6x64.inf for about 30 seconds before I get the error message:
Processing data from remote server failed with the following error message: The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote
Management service is enabled. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OperationStopped: (System.Manageme...pressionSyncJob:PSInvokeExpressionSyncJob) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
The blip for installing the drivers is maybe 5 seconds. Is there a way to get the script to wait for successful reply or for it to check again to make sure it was installed before it times out? Again, it is successfully updating all enic drivers, so just
trying to make the remote script see that for verification over multiple servers.

That should work in theory... however the problem I'm running into is that the job will report a "fail" everytime no matter what because it loses connection with the remote host while it's updating the network drivers. However, on the server, all network
drivers are in fact updated. The only results I get from the receive-job is a timeout, but if I redirect the actual results from the command to a text file on the server, then just wait 15 seconds for the drivers to complete their install I can read what actually
happened. I'm not sure why the job is timing out. It waits for a good 30-45 seconds before timing out when the host is only blipping for about 10 seconds, but it never tries to establish a connection back.
Reading through, if our servers were updated with powershell 4.0 I could use the InDisconnectedSession
parameter I think... Hmmmm I'm gonna look into upgrading our powershell versions anyways.

[nForce] K7N2 Delta2 Platinum w/Version B.5 BIOS, trouble with post and XP install.

I have
K7N2 Delta2 Platinum
MS-6570E Version 1.0 motherboard
AMD Sempron 2600+
Elixir 500MB PC-3200 DDR (3 sticks, total 1.5GB)
eVga Nvidia MX4000 64MB AGP card
Maxtor ATA-100 PCI controller
I pulled everything else out of the box. I've tried the B.3, B.4, and B.5 BIOS and set everything to Optimized Defaults. I created a striped RAID Array of 4 WD 80GB drives on the primary and secondary onboard controller. The CD is on the Maxtor controller.
There are some problems I can't figure out.
1) The mobo identifies the CPU as Athlon XP 1100
2) The POST hangs just before seeking the IDE drives. I have to hit a key for it to continue.
3) The LED's on the D bracket have the top right light dark until the key is hit. Something to do with initializing the floppy controller.
4) The XP install fails to a blue screen just after hitting the F8 key to accept the license. The code is 0x0000007B.
Can someone tell me what these issues have to do with each other and how I can correct them?

Quote from: dmichael34 on 17-September-05, 22:42:56
The Maxtor controller was removed when you originally suggested to do so. The add on controller is an SIL 680 RAID.
I will try reseating the processor next.
I can also attempt a boot through POST without the array, as this shouldn't affect the boot process.
I did notice that the ctrl-alt-del on the LEFT side of the keyboard doesn't work.
However, the ctrl-alt-del on the RIGHT side of the keyboard does work.
Maybe I've been looking for a serious problem and overlooking the obvious.
I do not see how the CPU temp would cause a pause at boot until "any key" is hit... it sounds more to me like the system has paused to either look for a device or boot a BIOS on a device card.
If I am not mistaken, you are using a RAID card to boot windows? Is this correct?
If that is true it is possible the boot sequence is not set correctly in the BIOS such as "BOOT OTHER DEVICE" ( I cannot remember the exact term in the BIOS)
I am not sure about that but you could try changing the boot sequence so your RAID card is above "HARD DISK" on the list

Delta2 Platinum - Error installing Ethernet drivers on WinXP SP2

Similar Messages

Maybe you are looking for