Deltas not picking up..

Hi experts,
In lbwe in job control i have scheduled a job for SD Sales. But when i checked the job in sm37 it was cancelled and the error message is:
Structures have changed (sy-subrc = 2).
In development for the datasource 2lis_11_vaitm we have enhanced the datasource and added 4 fields.
Now the problem is occuring in production.The datasource is active and when checked in rsa3 it is picking up values for the newly added fileds also.
How to solve this and schedule the datasource for picking up deltas ?
Thanks in advance..
Bhadri M.

Hi Bhadri,
1] Ask the respective team to stop the posting in R3 for the S&D area.. and u need to set the time frame for this activity as generally the down time shud be as minimum as possible. Before doing this one u need to analyze the data which has got blocked in SMQ1 or LBWQ.. this is depends on the way that ur V3.. if u are using the Queued then it will be there in LBWQ.. and if u are using the unserialized then it will with the SMQ1.. and if u are using the direct then it will be direct from the base tables to the Delta queue.
U shud not change the V3 mode without the proper knowledge.. .. so u need to make sure that u use the exising settings of the V3.. if u change the V3 type to some other .. then the posting will be moved from base tables to LBWQ or SMQ1 based on the type of V3 that u are going to select.
So make sure that u have the information about the data which is has got blocked.. for this u can check the base tables and in that u can check the documents from the date this issue has arised.. preferably u can take 1 days before the transport which has happend to till date.(both based on created on and changedon).. this clears both question 1 and 2.
3] For filling up the setup tables u need to delete the existing Setup tables data for this application(11).. and then u need to fill the setup tables for the missing document range or for the period range. once this is done in R3.. then u can take the repair full load to BW with the same selections(same as Setup selections).
4] once u have done the repair full.. then u can ask remove the down time... .. before this.. make sure that u have the proper V3 update for ur application.
5] after the down time u will get the data in LBWQ or in SMQ1 based on the V3 type... and u need to schedule the V3 job.. so that the data will move from here to the Delta queue RSA7.
and then u can schedule the delta loads normally.
If the existing data in BW is small for this application then u can look at filling the whole set up tables and then reload the content again..
As u have introduced new objects in ur DS and I hope u might have enhanced ur targets as well with those fields.. For getting the history to the new fields u need to take this setup tables filling anyway..
So plan the activities accordinly and then proceed further..
Make sure that u will take proper down time and also drain the queue before introducting the changes in the extractor level..
Thanks
Assigning points if the way to say thanks

Similar Messages

Deltas are not pick up by the data source

Hi,
From one weak onwards my data source is not pick any deltas today i found that the luw's are struck into LBWQ.I can see the luw's in lbwq .In rsa7 there is no luw'sie It shows 0.My data source 2lis_02_scl. The V3 job compleated success fully every day.
So how can i clear the LUW's to rsa7. Remember this is production .
This is very urgent please respond.
Thanks in advance.
Sharma.
Message was edited by: Amol Kulkarni

Hi
Here a few links on the topic..
/thread/101086 [original link is broken]
Luw in the delta queue.
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Regards..

Delta Extractor Is not picking changed values

Hi All,
When the values or texts in a PO are changed the delta extractor is picking up the changed values as deltas (provided the changes where done in PO Header or Item Overview) but when a PO values or text that are changed in the Item Details the delta mechanism is not picking up the changed values (the fields whose values are changed were initially not in the LO Cockpit Extractor they where added and the values to these fields are populated using an ABAP Program)
Is there a reason that Delta mechanism doesn't work for fields that are not delivered by the SAP Extractor or do we need to modify the code in order to collect these changed values by Delta Mechanism (Direct Delta as the Update Mode).
Please let me know if anybody came across the same problem .
Thank you all in advance.
Regards,
Dhanam

Hi,
this is another story.....
You'll have to
- enhance the PO items table (EKPO) with your fields
- activate the right customer exit for purchase orders (search in SMOD; or in this forum..) and populate your fields during this exit. if the field needs to be maintainable by the R3 user, you'll have find a SAP exit (again SMOD) in order customize one of the screen and populate your fields in R3.
- use another exit to populate the new fields to LO delta queue
- enhance your BW extract structure (done)
- and so on...
As you can imagine, the above get quite more complicated (an expert in MM shall support you) and it needs to be approved by the PM since you'll modify R3.
But that's basically it!
hope this helps...
Olivier.

Extractor not picking delta data

Hi All ,
I have a very peculiar problem with extractor 2LIS_02_SCN .
The Delta data's are not getting captured in BW as well as in the RSA3 .This is happening for few PO's .
I checked the extractor debugger as well (in RSA3) , but it shows only 1 record which is already there in BW , but the new delta data is not available in RSA3 as well .Deltas are running fine everyday . I also checked in the underlying table EKES for the Vendor Confirmations , I can see 2 records ie the previous as well as the changed records . Now my Problem is why the extractor is not pulling the new changed record . We have Update Mode in R/3 as Direct Delta
Note : There were no filling of set tables done since long time. set up tables are working fine .
Could anybody help me in this issue .
Thanks & Regards
Zeenath Syeda

Hi sidhartha,
SAP says :
To improve performance, this DataSource contains no information about scheduling agreements. This also applies to returns items, service items, and limit items.
So check whether your records(which are not extracted) are belongs to any one of above types.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Delta Upload picking no records

Dear All,
I have problem with delta upload, Intialize upload is happening but delta upload not picking the records but it is showing green signal with 0 records.
DataSource : 0CRM_SRV_PROCESS_H
the delta type for the datasource is AIMD.
I am really not very sure if my datasource supports delta.
I am pulling data from Solution MANAGER.
Please guide..
Thanks,
SGK.
Message was edited by: SGK

Hi,
Check your datasource in RSA2 there you can check whether or not it is delta enabled also you can check in rsa3.
Hope this helps
Assign points if useful
Regards,
venkat

CRM Datasource-Delta not Working

Folks,
I am using CRM Standard Datasource 0CMS_RTCM_TRAN-Resale Tracking and Claims Management data..
I have enhanced this Datasource with four fields and transported to Quality system..
no problem with the new additions..Datasource is extracting properly..
but Delta update is not working..Delta Queue is not picking any records..but new transactions are getting updated in the respective source tables..
when i checked in BWA1- am getting these messages:
error message:
(121) MS_RTCM_TRAN: Table SMOXHEAD contains no BDOC name.
Warning messages:
(111) MS_RTCM_TRAN: No mapping found for extract field SLSR_ADDRESS_I..similarily for all the Datasource fields, its showing the same no mapping warning..
its working fine with Full update..but for Delta update am facing these issues..
Can you please explain what could be the reason for this and suggest a proper solution..
Thanks and Regards,
Yog

Hi,
Are there any transactions to change the BDOC name for Standard Datasources??..
In BWA1, when i tried to change these ADAPTER settings, i am getting this message:
"DataSource 0CMS_RTCM_TRAN cannot be edited with this transaction"..
i hope if i specify the BDOC name, Extraction should be happening..
so please suggest where i can perform these changes??..
Note : currently no extraction is happening because of this..
Regards,
Yoga

Weblogic 10.3.2.0 installation does not pick the right JDK

The installation does not pick up the right jdk version that is jdk 11.6.0_11 . Although the machine is running the same. Instead it picks up jdk 1.6.0_14. have tested the machine many times. I am Installing Oracle SOA Suite 11g.

Inside "startWebLogic.sh" file add the JAVA_HOME like following (just below the "setDomainEnv.sh" call):
JAVA_HOME=C:\bea103\jdk1.6.0_17
See if this helps.
Thanks

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card and it has been reset but for some reason it will not pick up my wireless network, or any other wireless network. What is the problem?

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?

Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim

AP - Payment Process not picking up Invoices

Hi All,
I am running the payment process from AP(Payments Manager).I have created 5 Invoices on 12-Dec-2013 and have attached the Pay Group. Once i run the payment process with the pay group none of my invoices has been picked up for processing.I have given the date range from 01-Dec-2013 to 13-Dec-2013
Please help i need close this task ASAP
Regards

Hi,
What are the payment terms on the invoices? If these are not IMMEDIATE, and the payment is not due, the system would not pick them up until they are due.
What is the payment method on the invoice and in the PPR? Are you running the PPR for electronically paid invoices but the invoices are set to be paid by check?
Are there any holds on the suppliers you are trying to pay?
What are the other parameters you gave when running the PPR? It helps to check those against the invoice to make sure they would qualify.
Information about the pararameters you are using and one of the invoices to be selected would be helpful.
Cheryl

Document type KR is not picking to Clear GL account with T-code F-03

Hi all,
My client wants to clear GL account Cash-in-Transit which is open item managed. He has posted two items. One is with KR document type like Intercompnay adjustment account debit (40) and Cash-in-Transit account credit (50). Second item is with SA document type like Cash-in-Transit accont debit (40) and Intercompany adjustment account credit (50). He did not give vendor number and appropriate posting key (31) while postings. With document type KR, he posted with posting keys 40 and 50. Now while clearing the GL account through T-code F-03, system is picking only SA document type. The system is not picking document type KR. He wants to clear the items with each other. I have checked the document type settings. Check boxes Intercompany postings and trading partner are active in both above document types.
How can the GL account be cleared ? Are any configuration settings missing ? Kindly advice as soon as possible.
Thanks in advance.
Regards,
K.S.K

Hi,
First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
You posted a debit of 100 USD @ 40 = Rs. 4000.00
You posted a Credit of 100 USD @ 42 = Rs. 4200.00
Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
Hope it is clear to you now..
Regards,
SAPFICO.

Vendor account not picked in F110 payment run

Hi Sap Experts,
i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y for currency INR its not picking up in payment run even all the open item s are due,
could help me to solve the issue
Laxmi

Hi,
Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
2. Also see the dates entered in parameter tab of both runs
Regards,
radha

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

Document not picked in F110

Invoice doc: 5000000001
Due on: 12/30/2008
Baseline date: 11/10/2008
Payment terms: 50 days net due
Vendor master details:
Vendor: 241344
Payment method: E
Payment proposal Details:
Payment run on 12/29/2008 through F110 t-code
Parameters:
Identification:MTR1
Payment method: E
Vendor:1 to 99999999
Result : above invoice doc not picked
Second payment executed on same day 12/29/2008
Parameters:
MTR2
Payment method: C
Vendor: 1 to 99999999
Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
Again same executed on 30th but not picked but finally picked on 01/02/2009
My question is why document is not picked in MTR1 which has correct values.

Hi
In F110 , when ever you run Payment Proposal , it picks the invoices which are due for the Payment Run date. It also depends on the Next Run Date , Based on the Discount periods of the Payment terms.
In both MTR1 & MTR2 , check your Next Run date.
Regards
Venkat

Document not picked in f110 payment

Invoice doc: 5000000001
Due on: 12/30/2008
Baseline date: 11/10/2008
Payment terms: 50 days net due
Vendor master details:
Vendor: 241344
Payment method: E
Payment proposal Details:
Payment run on 12/29/2008 through F110 t-code
Parameters:
Identification:MTR1
Payment method: E
Vendor:1 to 99999999
Result : above invoice doc not picked
Second payment executed on same day 12/29/2008
Parameters:
MTR2
Payment method: C
Vendor: 1 to 99999999
Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
Again same executed on 30th but not picked but finally picked on 01/02/2009
My question is why document is not picked in MTR1 which has correct values.

Hi
Check the base line date for this IV - I dont think the document is overdue in MRT1 that is the reason it is not picked up (in frist payment run). It is overdue in the payment run (in January you run).
Check the invoice date for document getting picked up ( i hope it is with in the date), check the base line date for payment for payment proposal (I hope on 30th it is not overdue).
Thanks

HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up. My pc is running windows 8.1 os. I do not see that os in the list of operating systems.

I am trying to install a new iPod Shuffle and my pc does not pick it up.
My operating system is Windows 8.1 and windows 8 does not appear
in the list of operating systems.

You are referring to OFFICE 2010, not Windows XP or 7.
And which version of Windows do you have?
NEVER begin before you have a backup, ideally one you have tested and know works.
You don't really install Boot Camp, the Assistant is a partition tool utility.
You may just want Office 2008 for Mac.
If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

Deltas not picking up..

Similar Messages

Maybe you are looking for