Deltas problem(deltas set till 31.12.2007 only)

Hi
we have a data source called 0HR_PY_PP_1 which is feeding data to a ODS called 0PY_PP_C1.Currently deltas are running through process chains..But i have observed to day that deltas are set throuh selections( 0TRANSDATE=20040101-20071231;).I don't know why they have taken transaction date with selections in deltas...Init also done with these selections only.So, with these selections i can never get data from 2008..how to get deltas from 2008 onwards..
Please suggest...
Thanks,
Teja

HI Teja,
You cannot have delta load with selections, it is not enabled. It takes selection from the selection of init.
As far as ur scenario to get data for 2008 and ahead.. do another init for selection 2008 till 9999 and then it will fetch records for 2008 and ahead.
Thanks for more details post further,
Assign points if useful
Aadil...

Similar Messages

Does IOSD 5.1.1 support application delta set updates?

Does IOS 5.1.1 for iPad support application delta set updates?

Yes, fully supports.
          Daniel
          -----Original Message-----
          From: greese [mailto:[email protected]]
          Posted At: Monday, January 15, 2001 6:05 AM
          Posted To: servlet
          Conversation: Does Weblogic 5.1 Application Server support UTF-8 ?
          Subject: Does Weblogic 5.1 Application Server support UTF-8 ?
          Hi, can anybody kindly answer me if weblogic 5.1 application server
          suppport
          UTF-8 encoding ?
          Thanks in advance.
          Greese

Can't activate/deactivate(not the delta setting) 2lis_02_s174.

Hi guys,
I have setup BW 7.0 2lis_02_174 datasource, but unable to locate the
activation and deactivation setting in LBW1 or LBWE.
I am able to setup the statistical data, can run the RSA3 to see the
initial is available, just can't locate activation setting for the
2lis_02_174 as deactivation for 2lis_02_s174 is required for the
initial load.
LBW0 can only activate and deactivate the delta setting not the main
activation for LO datasource, I know how to activate/deactivate for
2lis_02_s012 as well as 2lis_02_SCL, ITM and HDR. Just can't locate
2lis_02_s174 datasource activation setting.
We are using LO extraction method for MM-PUR data, but using
2lis_02_s174 for service data.
Steps taken so far:
1. LBW0 to check 2lis_02_s174 is available.
2. Run statistical setup for the datasource.
3. Check the initial load via RSA3.
4. kick off initial load from BW.
5. initial load fail due to the 2lis_02_174 is still active.
6. LBW1 to check if 2lis_02_174 is still active, can't locate it.
7. LBWE to check if 2lis_02_174 is still active, can't locate it.
Hope anyone get help out as soon as possible as I have tried many things and many times, thanks you all.

Hi Joe
did you try TC OMO2 to activate. Select your info struc Menu/ Edit/ Parameters
For the initial load you have to activate update for LIS Structure.
To make sure that the info structures S174 will be updated, you have to activated it in R/3. For every application in LIS (eg. sales & distribution, purchasing) you have to activate the corresponding info structures you want to populate.
Specify the period split (eg. monthly, weekly) and the update mode.
If you can't see the tables S174BIW1 and S174BIW2 that are used to assist the delta update process within BW you have to set up the LIS environment with program RMCSBIWC or TC LBWO.
If the info source is not generated then ensure that the info structures in R3 can be used as source tables for BW, ffollow in LBW0 and generate the info source but seemingly you say that it is there.
Check in table TMCBIW if status for your info structure is active.
Try this out then follow with the delta updating do first the generate update and then activate.
hope this could help you
with the best regards
Boujema

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Problem in setting participant in business rule

Hi All,
I am facing problem while setting the target participant in business rule. I want to route the task to the target participant for the adhoc routing in serial process .It's not taking the value as participant name.
I have 5 participant for approve d task .But when I am writing
If PreviousOutcome.outcome=="'REJECT'"
then
call GOTO(participant:"CTU")
as CTU is one of the participant in the process.
But it gives the error while deploying the application as unknown participant .Please tell me how come I route to different participant as per the condition in serial routing.
please help me.
Thanks & Regards
Aseet

Multi-post:
http://forum.java.sun.com/thread.jspa?threadID=727161&tstart=0

Setting up a Wireless-N only network (WRT160N) problem.

Hi.
Now that I bought the wireless N adapter for xbox 360, all my wifi enabled devices are "N" capable. So, I've been trying to set my network to "n only" but everytime I do that, I can't connect any of my devices to my network.
Can someone please help me to properly configure my router/devices?
Here is a list of my network devices:
WRT160N router
MacBook Pro
Toshiba Satellite A505 Laptop
Xbox 360
iPhone (I do use wifi most of the time while at home)
iPad (same as iPhone)
So, as I said before, all my devices are N capable, but once I switch the router to wireless-N only, all my devices get disconnected. They all can see my SSID, but can't connect to it.
Any advice/suggestion/tutorial would be greatly appreciated.

Well... seems like the WPA security was the problem. I switched to WPA2 and is running like a charm. The only thing I have issues with is Media Center (usingo xbox as an extender). Everytime I run the network test, graphic or bar test shows a very unstable conection. The weird thing is that, if I run an HD video without media center (thru windows media playet sharing), the video file runs flawlessly.... so... should I blame the lame media center for this?

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Problem in Set Check for Duplicate Invoices

Hi,
I have did all the required setting s for check duplicate invoice , but when i do miro , its not giving any error or warning msge.. i did all the config as per blw link..
FYI- in migo, i have entered the 3434 as a invoice ref # in delveriy note column and while doing miro , i have entered 3434 in ref column and give the 3434 as a dlvery note # in item tab .. but its not giving any error?
Pls guide, where the mistake has gone wrongly??
Problem in Set Check for Duplicate Invoices
Edited by: UJ on May 15, 2009 1:45 PM

Hello,
Hope you have done all the required configurations for the checking of double invoice and ticked the vendor for the double invoice checking in vendor master record.
You have to understand the way the system does the double invoice check.
As per the configuration, if the system identifies an invoice for a vendor whose double invoice check is activated, at the time of MIRO, system will update a separate table.
So system will check for the double invoice entry among the invoices entered after making the tick in the vendor master.
i meant to say that, if you are introducing this double invoice check in between the transactions, the check will be valid only for the invoices entered after the activation of double invoice check.
Regards

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problem in set session varibales

hi
i have a problem in set roles varibale in OBIEE 11.1.1.6
i use a initialazion block and row-wize initialization
but it set the ROLES varibvale just by BIConsumer and Authenticated user
and it does not set my values
what should i do??
thanx for any help
medi

Hi Atul,
>> I am facing problem that in Item master "Set GL By" changes from Item level to Item Group automatically
I am not sure whether my reply will be of any further help to you or not!
However, would you please check whether this behaviour is also reproducible in demo database (say OEC computers) or any other database on the same server environment.
If you are able reproduce the same problem in all databases that are configured in your current server environment, I recommend to report the issue to support via a ticket (if not created already).
If the problem is with only one database then as already recommended by other experts on this thread:
1. Comment all user code in Stored procedure
2. Verify if any formatted search queries are active on Item Master (like auto number generation, like ...)
3. Is there any add-ons that are active on Item Master
Would appreciate if you also write back whether you are not able to update on change of "Set GL By" (or) it is getting changed automatically from item level to Item group.
Good Luck.
Regards
Satish

Problem in setting transperancy in Jframe

I have a problem in setting transperancy to the Jframe. I would like to know is there is any way for doing it, if it so how ?
With Thanks
John

Multi-post:
http://forum.java.sun.com/thread.jspa?threadID=727161&tstart=0

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Deltas problem(deltas set till 31.12.2007 only)

Similar Messages

Maybe you are looking for