Demand control key PM01 does not allow capacitive planning - ERROR MRSS

Hi Experts!
I need help with an error that is being presented today at MRSS when I want to assign an operation to any of the resources the system is throwing the message: DEMAND CONTROL KEY XXXXXX does not allow capacitive planning.
have not made configuration changes is why I do not understand that may be failing....
Regards!
Damy

Hi Pete & Rakesh:
Thanks for responding, I commented that the control keys are as you indicate me in the picture despite this error still occurs.
Deputy images:
In the transaction /MRSS/PLBOORG the error code is /MRSS/SGE087
What other settings can look.
Thanks
Regards!
Damy

Similar Messages

SQL server 2005 does not allow remote connnections error: 40 w/Synch Manage

I have a local server for B1 that I need to synch to a hosted Webserver. When I go to Synch Manager, I can't connect to the webtools on the hosted webserver even when I enter the IP address (which the firewall has been updated to allow).
When I try to connect is says "an error has occured while establishing connection to the server. when connecting to SQL server 2005 , this failure may be caused by the fact that under the default settings SQL server does not allow remote connections. [provider: named pipes provider, error:40. could not open connection to SQL server.
I'm not a firewall or Infrastucture expert so I need assistance.
any help would be greatly appreciated!
Heidi

turned out we just needed to turn on remote connections and named pipes for SQL.

Your profile option does not allow automatic numbering error when trying to load BSA

We are getting this error while trying to load BSAs. The profile option is set to always at the responsibility level,
The same code and settings were tested in lower instances and it went through fine
Document sequence is set correctly.
Any inputs to resolve this issue would be greatly appreciated. It has stopped out production Data conversi
Thanks
R

Hi Winsky,
Ensure Profile: Sequential Numbering must be set to: 'Partially Used' at app level
Refer the following note and check whether it helps:
I Get The Error: Your Profile Option Does Not Allow Automatic Numbering. [ID 560388.1]
In Order Import stuck record with error "Your Profile Option Does Not Allow Automatic Numbering" [ID 1083645.1]
Best Regards,

"server does not allow relaying" email error

Since upgrading to iPhone 4, sending an email always results in the error message "A copy has been placed in your outbox. The recipient "......@...." was rejected by the server because it does not allow relaying. This happens regardless of the recipent. It also happens to a friend of mine who still has the iPhone 3G but has updated software. HELP PLEASE.

Hi,
I was told there could be a problem with your Outgoing mail server settings and most likley have an Outgoing authentication error with your server. Make sure all your settings comply with your servers suggested settings for IMAP or POP3 etc. Usually located in options of the web version mail.
Most importantly make sure your username and passowrd are correct and added in the Outgoing Mail server
Hope this helps!
Contact your mail server provider for suggest outgoing settings if u can not find them
Michael

TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

KeyUsage does not allow digital signatures

Hello,
I'm getting the security: KeyUsage does not allow digital signatures error (in java log) when trying to authenticate our web-based java app using a smart card (CAC). The smart card authentication works fine on one test system, but not the other. Both are using the same 'certificate' (we believe). Both have the same IIS 6.0 settings, and same java setting...as well as IE browser settings.
Visually, the symptom presents itself via the sun java login prompt when clicking the link to load the java app. We have an asp client that works fine. Only our java app is asking for re-authentication. If we manually type the credentials of a system admin, it loads the applet fine. What I can't figure out is, "Why are we getting prompted for a log-in to begin?"
Note: We have verified that IIS (via IIS logs) that authentication is successful, yet still prompted.
Here is a snippet of the java log: ----------------------------------
security: Checking if SSL certificate is in Deployment permanent certificate store
security: KeyUsage does not allow digital signatures
Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
network: Firewall authentication: site=sditap10086.afsac.wpafb.af.mil/134.136.33.21:443, protocol=https, prompt=, scheme=ntlm
java.io.IOException: Server returned HTTP response code: 401 for URL: https://sditap10086.afsac.wpafb.af.mil/report.web/ASP/insight-inpage.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
Any clues?

One of the KeyUsage extension bits is DIGITAL_SIGNATURE which in your case has most likely not been enabled so try getting a certificate signed with the DIGITAL_SIGNATURE bit enabled. It would be a good idea to actual have a look at your certificate to see which KeyUsage bits are enabled and whether the KeyUsage extension is set as critical or not. If the extension is defined as critical, then all the bits have to be followed, whereas if it is not critical, then the bits can be ignored and it depends on the API used on whether they enforce what the bits say.

TS3899 The email arrives with no problem, but when making a rely, the message pops up stating "The server does not allow relaying" and the reply is not sent.

Received an iPad for Father's Day; during email setup, not able to send a reply to an email as a message appears stateing "Message not sent as server does not allow relaying." Can receive emails with no problem. Whoes server, theirs or mine.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

My ipad doesn't send emails because it says the server does not allow relaying. What is relaying?

My ipad doesn't send emails. Message says the server does not allow relaying. What does that mean and how do I fix it?

Copied from here.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
How to fix
If this is an AOL issue, try these: go Settings > Mail, Contacts, Calendars > select your AOL.com account > SMTP from the Account Info Page > SMTP from the SMPT Page > make sure that the Server is ON, make sure that the Host Name is smtp.aol.com. Further make sure your username and password are correct and added in the Outgoing Mail server; make sure that Authentication is set to Password and make sure that Server Port is 587
If this is not an AOL email: go Settings > Mail, Contacts, Calendars > Accounts >Account Info > SMPT> turn off primary server, turn on other (e.g. AT&T) SMTP server.
Go into Settings > Mail, Contacts, Calendars > Your Account > Outgoing mail Server SMTP > Primary Server then turn Server ON and fill in both User Name and Password under Outgoing Mail Server.

TS3899 My email keeps telling me the message failed because the server does not allow relaying. Please help

My e mail keeps coming back with a message saying failed because the server does not allow relaying. Please help

Check the suggestions at this website. They may help you get email working all the time.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don't man

I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don't manage to speak English on phone, bad hearing, to fast spoken, odd expressions.What can I do? Is there a possibility to write a complain?

You can use online chat to talk with Adobe. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

My control button does not allow me to return to the home page. I have to completely shut down the system and reboot to switch to another application.

My navigating button, key does not allow me to switch to other applications. To do this I have to
Shut down and reboot. I spoke with apple customer service on
Friday and they has me connect to the computer and download any new
And updated information. That resolved the issue for one day and the problem
Started again.

Try restoring your phone as a "new" device in iTunes, not from backup. When finished, eject your phone. Do not sync any content back to your phone. How are things working now? If OK, sync your content back to your phone. If not, make an appointment at an Apple store, as you most likely have a hardware issue.

IPhone 3G ** key does not allow me to access my land line voice mailbox...

OK, I have a great iPhone 3G issue for you. Here it is...
In order for me to retrieve my voice mail messages on my office land line, I have to call my office direct dial phone number. After that outgoing message begins to play, I have to press ** on my iphone keypad to prompt the voice mail phone system to let me know dial my extension number and password. On my old iphone 2G, it works fine. But with the new iphone, it does not. Another words, when I press **, it does not allow me to the part where I dial my extension number and password. It instead instructs me to dial my extension number and leave a message (not enter my password). Possibly the ** tones from the new phone are too short? Not sure? There are two other people at my company that are having the exact same issue on their 3G phones as well. I even went to the AT&T store and tested it on the display iphones there. Same problem...

I was on the phone for an hour today with tech support. I spoke first to a tech support agent and next to an iPhone product specialist. Neither had heard of this issue, but I referred them to this thread and they now know it is an issue.
The product specialist tried to solve the problem and could not. He told me he was emailing the engineers to determine a workaround. He told me he would call me by Tuesday at the latest. His name is Richard and I will continue to update our progress in fixing this issue as I receive information.
If we can't access our land line corporate voicemail I don't see how I can keep the iPhone even though it otherwise works well and has many positive benefits over the Windows-based smartphone I was using (and may have to go back to).

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance '. I changed my apple ID passwords, still same. help me please

Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

SharePoint List Form using InfoPath 2010 "Cannot insert the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls"

I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,

Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

Demand control key PM01 does not allow capacitive planning - ERROR MRSS

Similar Messages

Maybe you are looking for