Demand Management tables

Hi all,
I want to know the Demand Management tables. Please if anybody can speify SOP tables, will be very much needed & hence helpful to me.
Regards,
MHP

Dear MHP,
LPDX
M60I
PBED
PBHI
PBIC
PBID
PBIM
PBIV
T399Q
T450F
T450P
T459A
T459C
T459K
T459R
T459S
T459U
T459V
T459W
T459X
T459Y
TPHVP
TPLVP
TPSVP
sree

Similar Messages

Demand management table

Sir,
We are following the process of SOP in REM as follows:-
1) Creation of Product group.
2) Upload the Sales plan for product group
3) Desagregation of products
4) Copy to active version from inactive version
5) Transfer to demand management
we reqire the table for Sales and operation plan and also after transherring to demand management which table is updated. This is required as we are preparing a report for Sales Plan v/s Production plan.
Thanks & Regards,
Nilesh

Dear Nilesh,
Check these tables,
P445V                            Sales and Operations Planning: Versions
PGMI                             Product Group/Member Allocation
PGPL                             Sales & Operations Planning (SOP)
PGPLE                            SOP Characteristic Values
PGZU                             Product Group/Member Quantity Conversions
Regards
Mangalraj.S

Which table are Demand Management data (MD61) are stored?

Hello guys.
I need to know in which table demand management data from (MD61, 62 and 63) are stored?
Also I need to know if there is some tips/rules to prepare a load from a file to come from Excel spreadsheet?
Is there any BADI or BAPI to load these information directly into the table?
Just for information: My current client doesn't use SAP yet. It's being planned to make the implementation in the middle of the next year...besides they use SAP in other plants around the world...
The main idea is to use MRP from SAP to get the suggestion for purchase requisitions and also planned orders and proceed the production and purchase activities in the legacy....
Please give me some instructions.
Thanks in advance.
Harlen Pinheiro
SAP PP
Brazil

Hello Harlen
This information is stored on tables PBED and PBIM.
You can use BAPI BAPI_REQUIREMENTS_CREATE to load data to demand management.
Please also take a look on the following document before opening this kind of thread:
Landing page for new users in SAP PP - ERP Manufacturing - Production Planning
BR
Caetano

Demand Management Through SOP

Hello Everyone,
I have a scenario where I receive an 8 week rolling forecast from marketing. This is transferred to production. 2 weeks before actual production the plan is firmed.
I was hoping to implement this using SOP transfer to demand management. I was also planning to use an MRP type with a planning time fence. But am not exactly sure of the best practice to transfer Rough cut plann data to demand management. Do I directly transfer the Rough cut plan to a "requirements plan" version?
If not what would be the best possible solution to run SOP?
Also Please suggest as to any specific configuration settings to be maintained for SOP.
Any help in this regard would be greatly appreciated.
Sincerely,
Aji Kurian Mani

Hi
It depends on at which aggregation level you are receiving the Forecast.
if you are receiving at Plant -Material level. I would advice you to directly upload in to MD61.
SOP is required, if you need to do any forecasting in SAP.
or if you need to publish , analsyse the Historical and Forecasting Values at diffrent Org Levels(Plant, cutomer, Material,Sales org....etc)
using the planning tables you can maintain the Figures at one Level, which gets aggregated automatically.
Regards
Ratan

SOP - Flexible Planning u2013 Demand Management.

Hello Gurus
Can any one guide me SOP - Long term plannng / Flexible Planning - Transfer to demand managment Process
Thanks
JJ
Edited by: JJ_SAP_S on Jul 28, 2008 12:24 AM

Hi,
Transferring SOP to Demand Management :
Use:
You can pass on data planned in Flexible Planning or Standard SOP to Demand Management.
Demand Management determines the requirement dates and requirement quantities for important assemblies and specifies the strategies for planning and producing/procuring finished products. The result of Demand Management is the demand program. The demand program differentiates planned independent requirements and customer independent requirements. It gives the information needed in MPS and MRP for planning at SKU level. The placing of sales orders eventually consumes planned requirements and triggers updating to the Sales Information System. This actual data can then be used as input for future sales planning. For more information, see PP Demand Management.
Prerequisites:
The system distributes the data to the appropriate plants in Demand Management on the basis of the quotas you set in Customizing (in Define proportional distribution across plants). You can also make these settings in the Flexible Planning or Standard SOP menu by choosing Settings ® Plant distribution. Plant distribution works as follows:
If a plant or plants can be found for the material in the planning hierarchy, data is transferred to Demand Management for these plants.
If no plant can be found in the planning hierarchy, the system checks to see which plants have been maintained for the material in the material master record. It then checks to see whether distribution quotas have been maintained for the material. If quotas have been maintained, the transfer to Demand Management is based on these quotas.
If no distribution quotas are found for the material, the system checks to see whether you have set generic distribution quotas; that is, distribution quotas that apply to all materials. If so, the transfer to Demand Management is based on these quotas. If generic quotas exist for some but not all plants maintained in the material master record, the system assumes that the distribution quotas of plants without generic quotas are 0.
If no distribution quotas are found at allu2014neither material-specific nor generic onesu2014, the system splits the data equally among all the plants in the material master record.
See also:
Plant Distribution Quotas
Features
Independent requirements are created in Demand Management for all materials whose data has been transferred. These independent requirements are created in the base unit of measure of the material. The base unit of measure of the material is not necessarily the same as the base unit of measure of the information structure or the unit in which you planned the material. See also Switching Units in the Planning Table.
You can transfer SOP data to Demand Management in the following ways:
Transferring Online, Synchronously and Automatically:
You set the following information structure parameters in Customizing for Sales & Operations Planning (in Set parameters of info structures and key figures).
Field name of the key figure whose values are to be transferred
Planning version from which the data is to be transferred
Demand version to which the data is to be transferred
The system creates or overwrites independent requirements in Demand Management every time you save this planning version of the information structure in Flexible Planning.
Transferring Online, Asynchronously and Manually
You choose between the following options:
Transfer of the planning data of all members of a single-level product group from standard SOP (a single-level product group is a product group whose members are materials)
Transfer of the planning data created for one material from standard SOP
Transfer of key figure values from an information structure
You make the following general settings:
The material or product group whose data you want to be transferred
The plant of this material or product group
The planning version of the information structure in which the data is stored
The dates for which you want the data to be transferred
Whether you want to check what the data looks like as independent requirements before you transfer it
The requirements type
If you do not make an entry, the system sets the requirements type via the MRP group which is maintained in the material master record.
The version of the demand program to which you want the data to be transferred
Whether this version of the demand program is active and therefore relevant to MRP
Depending on the option you chose in step 1, you set one of the following strategies.
Transferring Planning Data from a Single-Level Product Group:
You transfer the sales plans of the materials direct.
You transfer the sales plans of the materials as proportions of their owner product group (using the proportional factors defined in the product group master record).
You transfer the production plans of the materials direct.
You transfer the production plans of the materials as proportions of their owner product group (using the proportional factors defined in the product group master record).
Transferring Planning Data of One Material from Standard SOP:
You transfer the sales plan of the material direct
You transfer the sales plan of the material as a proportion of the product group of which it is a member (using the proportional factor defined in the product group master record)
You transfer the production plan of the material direct
You transfer the production plan of the material as a proportion of the product group of which it is a member (using the proportional factor defined in the product group master record)
Transferring Key Figure Data of One Material from Flexible Planning
The information structure from which you want the key figure data to be transferred
The key figure whose values you want to be transferred
This key figure must be a quantity key figure.
For more details go to the following link :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a5/63238b43a211d189410000e829fbbd/frameset.htm
Hope this helps.
Reward if useful.
Regards,
Tejas
Hope this helps.

Retractor from BW to R3 Demand Management

Dear all,
I want to know if there is any standard retractor from BW to R3 Demand Management. I am already aware of KELR which retracts data from BW to R3 CO-PA.
Regards
Sapna

Hi,
If you are talking about sales DM THEN
Using Openhub in BW and collected sales plan quantities in a openhub table. This table is read by a program which is triggered in R3. This program selects data from BW table and inserts to R3 S076 table. S076 table stores SOP data and can be filled by a program.
reading data from bw:
CALL FUNCTION 'ZBFL_BW_BTC0001' DESTINATION p_dest
TABLES
t_s076 = t_bwtab
EXCEPTIONS
program_error = 99.
IF sy-subrc IS INITIAL.
WRITE:/ text-001.
ELSE.
WRITE:/ text-002.
ENDIF.
ENDIF.
adding sales figures into SOP table
LOOP AT t_r3tab.
INSERT S076 FROM t_r3tab.
IF sy-subrc IS INITIAL.
WRITE:/ text-005 , sy-dbcnt.
ELSE.
WRITE:/ text-006.
ENDIF.
ENDLOOP.
function in BW
FUNCTION ZBFL_BW_BTC0001.
""Local Interface:
*" TABLES
*" T_S076 STRUCTURE /BIC/OHBTC0001
select * into table T_S076 from /BIC/OHBTC0001.
ENDFUNCTION.
Regards
Ram.

Problem the PSI and Demand Management

Hi, we have a problem with using the PSI to step through stages in the workflow.
When we submit a Project to the Next Stage in a Demand Management Workflow with the PSI, the
Entry and Completion Dates of the previous completed stages changes to
the Submit date of the Current Stage:
When using the Normal Submit button in PWA this does not occur at all
Here is a Code extract that we use to do the PSI Call:
Has anyone had this before?
http://blogs.umtsa.co.za/nicoo

Hi Sai,
Please check the tabl entries in SE16 or similar
1. Assigned the site to the WH number (T340DT-LOCAT)
2. Activated TRM for the movement type/Storage types (T347A-KZINA)
2. Turned two step confirmation on for source and destination storage types (T331_B-QUEIN & T331_B-QUAUS)
Can you see anything in LTRM TRM monitor (no selections = only enter site number) i.e. a delivery number or TO?
If not please try:
1 Transaction LTRCC
2. Deleting the data delivery/TO and recreated it?
If this does not help, I could take a look at you setup if you allow external access?
Thanks James

Adding a note in Demand Management screen

Can I add a small 'note' some text verbiage like a memo in the demand management screen ( MD61, MD62, MD63).
THANKS

Dear,
You can enter a text in MD61/Md62/Md63 in the following
You can enter the text for the schedule line or item text
In table tab page select the line and
Goto -->item ttext...system gives the pop up no text exisits ...enter, it will take to the screen where you can enter the text
goto Schedule line tab page
Selcet the schedule line
Goto -->schedule line text...system gives the pop up no text exisits ...enter, it will take to the screen where you can enter the text
come bck if required

Transfer to demand management - Flexible Planning

Hi everyone,
I was wondering whether someone has carried out the next process in the following scenario. I am working with flexible planning in SOP (level-by-level planning and dual level planning type, since I am working with product groups).
Now I would like to transfer to demand management some data stored in a ratio associated to one field (disaggregated value) in my planning table.
I tried to do it using the online mode but I just could transfer aggregated level values. I also tried to do it with batch processing (by creating a trannfer profile, then an activity, then a job and finally scheduling and executing the job) but there was an error message that looks like "No dual planning requirements allowed".
I would be very grateful if someone could give some useful information about how to solve my problem. I guess that someone in this forum has faced this challenge formerly.
Thanks in advance and best regards.
Ben.

Hi,
Yes, dual level was specified in the MC8A.
Thanks.

Best practice for timing of Transfer of forecast to R/3 Demand Management

Hi All,
I have APO DP 4.0 with monthly bucket. What is best practice to transfer the planning results to R/3. Meaning how many times we should transfer it?
And when forecast (PIR) is transfered it replaces the old PIR in demand management for that month. How it will affect the consumption of forecast in R/3? Meaning let us say in same month first time forecast transfered was 100 and by middle of the month 50 has been consumed. Now in same month forecast has been carried out and now 200 has been calculated for the same month and transfered to R/3. Now ideally the remaining quantity to be made should be 150 in R/3. Is it so? Any idea?
TBR, MM

Hi Somnath,
Thanks for the reply. The problem with frequent transfer of forecast to R/3 demand management is that the latest forecast ignores the prior shipments made in that month.
I will give numeric example:
Let us say we are in September month and in first week transfered forecast of 100 for one product to demand management. In first two weeks 40 items have been shipped so remaining is 60.
Now we are in third week and planner realizes that instead of 100 we needed to plan 150 and 150 number is sent to R/3 demand management as a fresh forecast for that month.
Now for September month we should see net demand as 110 (=150-40). Somehow this is not happening. It shows as a whole 150 net demand. Any idea why it is not happening.
Thanks and Best Regards, Manoj

SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

Dear Experts,
I am configuring the mass transfer from SOP to Demand Management. I want to maintain the variant for the program RMCA0766 so that I can create the Mass transfer job.
But I get the message RMCA0766 does not exist. So, How do I generate this program in the client?
Any help would be greatly appreciated.
Reagrds
Tom

Hi,
Please refer the below document. It speaks about the mass processing on SOP.
http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
Hope you will get the answer you needed.
Regards,
Manimaran M.
Edited by: M Manimaran on Aug 9, 2011 8:01 AM

Error during transfer to demand management in tcode MC88

Hi Expert,
I am getting an error 'No data maintained for material F1475078 plant 2000 in transfer period' during processing transfer to demand management in tcode MC88. Anybody know what is the root caused behind?
I try to search in internet and no solutions have been found so far, I plan to inform basis to restart the SAP server and try whether can solve the problem or not, which is my last option.
Hope to get a solutions from you guys soon.
Thanks.

Hi,
Refer to the below threads, it should resolve your query, else revert.
Error "No data maintained for material XXX plant YY in transfer period"
No data maintained for material MAT1_AJ plant 0001 in transfer period
Re: SOP transfer to Demand Management
Regards,
Vivek

Demand management planning strategy

Hi there,
I am trying to set up demand management for simple make to stock. I am using standard requirements type LSF which is linked to requirements class 100.(OMP1) The requirements class has a planning indicator (PLNKZ) set to "1" (net requirements planning) in OMPO. This is what I want as we want the warehouse stock to be taken into account when procurement proposals are generated. The planning strategy assigned to the material master has the "1" setting (net requirements planning). However when I run MRP after entering planned independent requirements for LSF (MD61), the purchasing requisitions proposed are just for the independent requirements and ignore warehouse stock. There is a line in the Stock / Requirements list that says "Gross Requirements Planning" Does anyone know where it is picking up "Gross Requirements Planning" instead of Net Requirements Planning (i.e. check what is in stock before creating procurement proposals)
Any assistance is appreciated.
thanks
D

Hi Suhas,
I don't want mixed MRP as such but when I cannot get any procurement proposals (requisitions) when the setting is blank. It may be elsewhere that the procurement proposal is - I am still checking.
However, when I choose "2" for mixed MRP, it does generate requsitions (but gives me the other problem where warehouse stock is not taken into account)
The requirements class 100 has an entry "1" for planning indicator and "1" for requirements category. All other columns are blank at the moment. I am in the process of experimenting with these next.
thanks for your help so far.
Donal

Can anyone share how to integrate Demantra Demand Management to EBS R12?

Hi all,
Can anyone suggest how to integrate Demantra Demand Management to EBS R12?
I use Demantra 7.2 and EBS R12.
I search in Manual and in some blogs but not much data support. If possible, I want step-by-step starting from set up such as setup the instance.
More of my concern are;
- Is Demantra can integrate with MRP, without APS or ASCP?
- Is that necessary to integrate by using seed data? If I implement my series with all new series, how can I suppose to link them to EBS?
Thank you in advance.
Best Regards,
Tanya T.

Hi Tanya,
To begin with, you can refer to the Metalink doc 434991.1 for an in-depth explanation on the integration from a technical perspective. Apart from this, there is an ocean of knowledge in the Demantra Documentation libraby in the metalink.The Implementation Guide provides an overview of the integration processes that synchronize or move data between Oracle Demantra and E-Business Suite applications.
Now coming to your concerns:
- Can Demantra be integrated with MRP, without APS or ASCP?
After going through the above mentioned documents on Demantra, if you still want an integrated instance of Demantra and MRP without using APS, then it will have to be a highly customized solution.This scenario will obviously have a great impact on various business aspects,which is out of scope of this discussion.
- Is it necessary to integrate by using seeded data?How to link new series to EBS?
The Demantra - EBS integration adds two new responsibilities for Demand Management viz. i)Demand Management System Administrator and ii)Demand Analyst.
The System Administrator creates a new user in the E-Business Suite with the relevant responsibility for which the user is automatically created in Oracle Demantra.
The user with "Demand management system Administrator" responsibility can create new series that get added in the Demand management component on creation. This series can then be used as per requirement.
I hope my comments help.Feel free for further discussions.
Regards,
Shekhar

Tranfser from demand management to SOP

Hello All,
is it possible to send data from demand management (eg.MD61) to SOP - standard information structure S076 or flexible planning ?
The idea is to put values directly to MD61 and use them later in flexible planning
thanks a lot
KS

Dear,
It is not possible. In sap, the planning cycle will be SOP -> Demand management -> MRP
SOPu2019 is a forecasting tool enabling you to set up sales, production, and other supply chain targets based on existing, future, or historical data. SOP is most suitable for planning finished goods. SOP plans are passed on to Demand Management in the form of independent requirements (MD61), which in turn is fed in to MRP (Material Requirements Planning).
Hope it clear your doubt
Regards / US

Demand Management tables

Similar Messages

Maybe you are looking for