Demand Management Workflow

Is that possible to customize browse upload button in demand management workflow 2013 in Project Server 2013.

Hi Mukesh,
I'm afraid that I can't quite understand your concern.. Maybe because my own english is poor (as I'm french). But could you rephrase in a clearer way your issue? It will definitley help providing you answers.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

How to create demand management workflow using visual studio

Hello all,
I need to create demand management workflow (Project server 2013) using visual studio 2012. I need to understand how we can write code in it. Any references??

Hi Shanila,
Here are some of the articles you can use for designing workflows using Visual Studio.
Getting started Project Server 2013 Workflows :
http://msdn.microsoft.com/en-us/library/office/ee767694(v=office.15).aspx
Using workflow for Demand Management:
http://technet.microsoft.com/en-us/library/dn458861(v=office.15).aspx
Creating Project Workflows using Visual studio 2012:
http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx
Thanks,
Phani

Problem the PSI and Demand Management

Hi, we have a problem with using the PSI to step through stages in the workflow.
When we submit a Project to the Next Stage in a Demand Management Workflow with the PSI, the
Entry and Completion Dates of the previous completed stages changes to
the Submit date of the Current Stage:
When using the Normal Submit button in PWA this does not occur at all
Here is a Code extract that we use to do the PSI Call:
Has anyone had this before?
http://blogs.umtsa.co.za/nicoo

Hi Sai,
Please check the tabl entries in SE16 or similar
1. Assigned the site to the WH number (T340DT-LOCAT)
2. Activated TRM for the movement type/Storage types (T347A-KZINA)
2. Turned two step confirmation on for source and destination storage types (T331_B-QUEIN & T331_B-QUAUS)
Can you see anything in LTRM TRM monitor (no selections = only enter site number) i.e. a delivery number or TO?
If not please try:
1 Transaction LTRCC
2. Deleting the data delivery/TO and recreated it?
If this does not help, I could take a look at you setup if you allow external access?
Thanks James

Workflow Start "Failed But Not Blocking Correlation" - Project Server workflow for Demand Management

Hi,
I'm trying to "Create a Project Server workflow for Demand Management" with project server 2013 just like is explained
here.
But when I try to create a new project the implemented workflow failed to start with the follow state message in the job queue: Failed But Not Blocking Correlation.
The detailed error display the follow message:
Exception Starting Workflow: The scope _/SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208_ has no workflows under it. HTTP headers received from the server - ActivityId: 52fef415-409b-4545-a9f6-ed75519b425c.
NodeId: My-Computer-Name. Scope: /SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208. Client ActivityId : 9ded4d9c-7733-7004-2661-c8977270af98.. Trace:    at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content)   at Microsoft.Workflow.Client.WorkflowManager.StartInternal(String workflowName, WorkflowStartParameters startParameters)   at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.StartInstance(String
serviceGroupName, String workflowName, String monitoringParam, String activationKey, IDictionary`2 payload)   at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.StartWorkflow(WorkflowSubscription subscription, IDictionary`2 payload)
at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid, Boolean isNewProject, Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow' uid='e3bbb06b-1d38-e311-940a-001cc094718e'.
Error:
WorkflowCannotStartWorkflow (35100). Details: id='35100' name='WorkflowCannotStartWorkflow' uid='e4bbb06b-1d38-e311-940a-001cc094718e'.
Queue:
GeneralQueueJobFailed (26000) - WorkflowStartWorkflow.WorkflowStartWorkflowMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='e5bbb06b-1d38-e311-940a-001cc094718e' JobUID='68ee1040-1d38-e311-940a-001cc094718e'
ComputerName='90f7432c-fbc8-4ebd-86f3-0236ce62661c' GroupType='WorkflowStartWorkflow' MessageType='WorkflowStartWorkflowMessage' MessageId='1' Stage='' CorrelationUID='9ded4d9c-7733-7004-2661-c8977270af98'. For more details, check the ULS logs on machine
90f7432c-fbc8-4ebd-86f3-0236ce62661c for entries with JobUID
68ee1040-1d38-e311-940a-001cc094718e.
with this detailed entries in the log file
10/18/2013 13:47:57.38 Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                Queue
ad3fy Critical Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL:   SA Name: <unknown> PSError: <unknown> A queue job
has failed. This is a general error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued
jobs) and the trace log (which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 68ee1040-1d38-e311-940a-001cc094718e. Name of the computer that processed this job: 90f7432c-fbc8-4ebd-86f3-0236ce62661c
(to debug further, you need to look at the trace log from this computer). Failed job type: WorkflowStartWorkf... 9ded4d9c-7733-7004-2661-c8977270af98
10/18/2013 13:47:57.38* Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                Queue
ad3fy Critical ...low. Failed sub-job type: WorkflowStartWorkflowMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages). 9ded4d9c-7733-7004-2661-c8977270af98
10/18/2013 13:47:57.38 Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                Queue Jobs
ad3fy Medium Error is: GeneralQueueJobFailed. Details: Queue Attributes: 68ee1040-1d38-e311-940a-001cc094718e 90f7432c-fbc8-4ebd-86f3-0236ce62661c WorkflowStartWorkflow WorkflowStartWorkflowMessage 1
9ded4d9c-7733-7004-2661-c8977270af98 . Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified. 9ded4d9c-7733-7004-2661-c8977270af98
Any idea?
Thanks in advance,
Alexander.

Hi Alexander,I have seen that error when the workflow manager has not been registered correctly with the PowerShell command - that should be in the docs referenced - or
http://technet.microsoft.com/en-us/library/jj663115.aspx. Let me know if that doesn't appear to be the issue here and I can dig deeper. Best regards, Brian
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

EPM Multi language support for custom list in demand management

Dear Team,
We have installed EPM 2013 with English as base language and Arabic language pack as secondary language. We have implemented demand management and portfolio management as part of EPM implementation. Currently demand management have some workflow and
custom list supporting these workflow. Just want to check, when user changes language setting from English to Arabic then all the forms ( build using custom lists) supporting English input forms should able to take Arabic text as input to these forms.
Please let us know how we can achieve.
Please help..:(
Regards,
Anup
Anup Kumar Presale Lead Wipro

Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

Best practice for timing of Transfer of forecast to R/3 Demand Management

Hi All,
I have APO DP 4.0 with monthly bucket. What is best practice to transfer the planning results to R/3. Meaning how many times we should transfer it?
And when forecast (PIR) is transfered it replaces the old PIR in demand management for that month. How it will affect the consumption of forecast in R/3? Meaning let us say in same month first time forecast transfered was 100 and by middle of the month 50 has been consumed. Now in same month forecast has been carried out and now 200 has been calculated for the same month and transfered to R/3. Now ideally the remaining quantity to be made should be 150 in R/3. Is it so? Any idea?
TBR, MM

Hi Somnath,
Thanks for the reply. The problem with frequent transfer of forecast to R/3 demand management is that the latest forecast ignores the prior shipments made in that month.
I will give numeric example:
Let us say we are in September month and in first week transfered forecast of 100 for one product to demand management. In first two weeks 40 items have been shipped so remaining is 60.
Now we are in third week and planner realizes that instead of 100 we needed to plan 150 and 150 number is sent to R/3 demand management as a fresh forecast for that month.
Now for September month we should see net demand as 110 (=150-40). Somehow this is not happening. It shows as a whole 150 net demand. Any idea why it is not happening.
Thanks and Best Regards, Manoj

Which table are Demand Management data (MD61) are stored?

Hello guys.
I need to know in which table demand management data from (MD61, 62 and 63) are stored?
Also I need to know if there is some tips/rules to prepare a load from a file to come from Excel spreadsheet?
Is there any BADI or BAPI to load these information directly into the table?
Just for information: My current client doesn't use SAP yet. It's being planned to make the implementation in the middle of the next year...besides they use SAP in other plants around the world...
The main idea is to use MRP from SAP to get the suggestion for purchase requisitions and also planned orders and proceed the production and purchase activities in the legacy....
Please give me some instructions.
Thanks in advance.
Harlen Pinheiro
SAP PP
Brazil

Hello Harlen
This information is stored on tables PBED and PBIM.
You can use BAPI BAPI_REQUIREMENTS_CREATE to load data to demand management.
Please also take a look on the following document before opening this kind of thread:
Landing page for new users in SAP PP - ERP Manufacturing - Production Planning
BR
Caetano

SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

Dear Experts,
I am configuring the mass transfer from SOP to Demand Management. I want to maintain the variant for the program RMCA0766 so that I can create the Mass transfer job.
But I get the message RMCA0766 does not exist. So, How do I generate this program in the client?
Any help would be greatly appreciated.
Reagrds
Tom

Hi,
Please refer the below document. It speaks about the mass processing on SOP.
http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
Hope you will get the answer you needed.
Regards,
Manimaran M.
Edited by: M Manimaran on Aug 9, 2011 8:01 AM

Error during transfer to demand management in tcode MC88

Hi Expert,
I am getting an error 'No data maintained for material F1475078 plant 2000 in transfer period' during processing transfer to demand management in tcode MC88. Anybody know what is the root caused behind?
I try to search in internet and no solutions have been found so far, I plan to inform basis to restart the SAP server and try whether can solve the problem or not, which is my last option.
Hope to get a solutions from you guys soon.
Thanks.

Hi,
Refer to the below threads, it should resolve your query, else revert.
Error "No data maintained for material XXX plant YY in transfer period"
No data maintained for material MAT1_AJ plant 0001 in transfer period
Re: SOP transfer to Demand Management
Regards,
Vivek

Scanner calibration for colour-managed workflow

I would like to do a decent calibration of my Epson V750 Pro scanner to achieve a colour-managed workflow. I have the latest version X-Rite i1 Photo Pro 2 calibration kit, and although this enables me to calibrate my monitor and printer, it does not support scanner calibration. I do have Silverfast Ai Studio which includes a scanner calibration facility - is that the best available to me or are there any other options, possibly using the i1 spectrophotometer as I know that it used to be possible to carry out calibration with the older versions of that equipment? Other than that, I'm using an Espon 3880 printer, running Vista x64 and using Photoshop CS5.

Mike is probably right, the Epson profiles available in the Epson scanner sw are close enough. I;ve never seen any ******** about scanner output in this forum.

Demand management planning strategy

Hi there,
I am trying to set up demand management for simple make to stock. I am using standard requirements type LSF which is linked to requirements class 100.(OMP1) The requirements class has a planning indicator (PLNKZ) set to "1" (net requirements planning) in OMPO. This is what I want as we want the warehouse stock to be taken into account when procurement proposals are generated. The planning strategy assigned to the material master has the "1" setting (net requirements planning). However when I run MRP after entering planned independent requirements for LSF (MD61), the purchasing requisitions proposed are just for the independent requirements and ignore warehouse stock. There is a line in the Stock / Requirements list that says "Gross Requirements Planning" Does anyone know where it is picking up "Gross Requirements Planning" instead of Net Requirements Planning (i.e. check what is in stock before creating procurement proposals)
Any assistance is appreciated.
thanks
D

Hi Suhas,
I don't want mixed MRP as such but when I cannot get any procurement proposals (requisitions) when the setting is blank. It may be elsewhere that the procurement proposal is - I am still checking.
However, when I choose "2" for mixed MRP, it does generate requsitions (but gives me the other problem where warehouse stock is not taken into account)
The requirements class 100 has an entry "1" for planning indicator and "1" for requirements category. All other columns are blank at the moment. I am in the process of experimenting with these next.
thanks for your help so far.
Donal

Can anyone share how to integrate Demantra Demand Management to EBS R12?

Hi all,
Can anyone suggest how to integrate Demantra Demand Management to EBS R12?
I use Demantra 7.2 and EBS R12.
I search in Manual and in some blogs but not much data support. If possible, I want step-by-step starting from set up such as setup the instance.
More of my concern are;
- Is Demantra can integrate with MRP, without APS or ASCP?
- Is that necessary to integrate by using seed data? If I implement my series with all new series, how can I suppose to link them to EBS?
Thank you in advance.
Best Regards,
Tanya T.

Hi Tanya,
To begin with, you can refer to the Metalink doc 434991.1 for an in-depth explanation on the integration from a technical perspective. Apart from this, there is an ocean of knowledge in the Demantra Documentation libraby in the metalink.The Implementation Guide provides an overview of the integration processes that synchronize or move data between Oracle Demantra and E-Business Suite applications.
Now coming to your concerns:
- Can Demantra be integrated with MRP, without APS or ASCP?
After going through the above mentioned documents on Demantra, if you still want an integrated instance of Demantra and MRP without using APS, then it will have to be a highly customized solution.This scenario will obviously have a great impact on various business aspects,which is out of scope of this discussion.
- Is it necessary to integrate by using seeded data?How to link new series to EBS?
The Demantra - EBS integration adds two new responsibilities for Demand Management viz. i)Demand Management System Administrator and ii)Demand Analyst.
The System Administrator creates a new user in the E-Business Suite with the relevant responsibility for which the user is automatically created in Oracle Demantra.
The user with "Demand management system Administrator" responsibility can create new series that get added in the Demand management component on creation. This series can then be used as per requirement.
I hope my comments help.Feel free for further discussions.
Regards,
Shekhar

Tranfser from demand management to SOP

Hello All,
is it possible to send data from demand management (eg.MD61) to SOP - standard information structure S076 or flexible planning ?
The idea is to put values directly to MD61 and use them later in flexible planning
thanks a lot
KS

Dear,
It is not possible. In sap, the planning cycle will be SOP -> Demand management -> MRP
SOPu2019 is a forecasting tool enabling you to set up sales, production, and other supply chain targets based on existing, future, or historical data. SOP is most suitable for planning finished goods. SOP plans are passed on to Demand Management in the form of independent requirements (MD61), which in turn is fed in to MRP (Material Requirements Planning).
Hope it clear your doubt
Regards / US

Demand management table

Sir,
We are following the process of SOP in REM as follows:-
1) Creation of Product group.
2) Upload the Sales plan for product group
3) Desagregation of products
4) Copy to active version from inactive version
5) Transfer to demand management
we reqire the table for Sales and operation plan and also after transherring to demand management which table is updated. This is required as we are preparing a report for Sales Plan v/s Production plan.
Thanks & Regards,
Nilesh

Dear Nilesh,
Check these tables,
P445V                            Sales and Operations Planning: Versions
PGMI                             Product Group/Member Allocation
PGPL                             Sales & Operations Planning (SOP)
PGPLE                            SOP Characteristic Values
PGZU                             Product Group/Member Quantity Conversions
Regards
Mangalraj.S

Demand Management Through SOP

Hello Everyone,
I have a scenario where I receive an 8 week rolling forecast from marketing. This is transferred to production. 2 weeks before actual production the plan is firmed.
I was hoping to implement this using SOP transfer to demand management. I was also planning to use an MRP type with a planning time fence. But am not exactly sure of the best practice to transfer Rough cut plann data to demand management. Do I directly transfer the Rough cut plan to a "requirements plan" version?
If not what would be the best possible solution to run SOP?
Also Please suggest as to any specific configuration settings to be maintained for SOP.
Any help in this regard would be greatly appreciated.
Sincerely,
Aji Kurian Mani

Hi
It depends on at which aggregation level you are receiving the Forecast.
if you are receiving at Plant -Material level. I would advice you to directly upload in to MD61.
SOP is required, if you need to do any forecasting in SAP.
or if you need to publish , analsyse the Historical and Forecasting Values at diffrent Org Levels(Plant, cutomer, Material,Sales org....etc)
using the planning tables you can maintain the Figures at one Level, which gets aggregated automatically.
Regards
Ratan

Demand Management Workflow

Similar Messages

Maybe you are looking for