Demand not getting generated on MRP run.

Hi All ,
We have an trouble ticket. For a particular sales order , the user has run the MRP , but no planned order is generated . So she cannot convert the planned order to production order .
When she tries to create a production order with T-code CO01 , She gets the error message ," Sales order does not allow Make to Order production"
Diagnosis :- Sales order entered is not to be included in Make to Order Production.
System response:- Account assignment can only be carried out with sales order created with requirement type for Make to Order production.
Please note :- We have many other production orders running for the same material in the same plants for different sales order . There is no problem with them except this sales order.
Following are the details for the material :-
Planning strategy:- 25
Procurement type :- E
Kindly advise . Thanking you.
Kind Regards
Ayaz A Khan

Dear,
Are you getting Message no. 61155?
In particular, the above-mentioned error messages are displayed if a planned order is not assigned to a sales order but the sales order number or the sales order item is not yet known when the account assignment data of the planned order is checked.
Check the requirement type in sale order and account assigment.
Create a production order with T-code CO08 with reference to sales order.
Then please refer this link,
Sales order does not allow make-to-order production

Similar Messages

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

PR,s not getting generated after MRP run

Dear All,
I'm running MRP through MD51 for WBS element where RM's are attached to WBS.
It is MTO scenario where no stocks of RM's are maintained. I have checked all relevant settings of Masters.
After running MRP through MD51, system is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
Please suggest & help.
Thanks in Advance.
Shaiz

Little confused on your statement
System is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
I would like to Know, whether the FG is attached with WBS or RM?

Schedule lines are not getting generated through MRP

Hello Experts,
While running MRP, we observed that the system is creating PR instead of schedule lines, although all the necessary prerequistes to generate schedule lines through MRP are maintained. For e.g.
1. MRP Schedule line relevant indicator '2' is maintained in the Source List.
2. Sch. Agreement dates and Source List validity dates are same.etc...
Further after some analysis, we observed that if we change the source list validity from date to some back date then system is creating correct schedule lines.
Example: Material M1; Planned delivery time 7 days; GR processing time 5 days; MRP Type PD; Lot Size WB;
SA validity dates - 07.09.2011 to 31.12.2011
Source List validity dates - 07.09.2011 to 31.12.2011
If MRP run on 12.09.2011 and source list dates are retain same as mentioned above, system creates the PR.
If MRP run on 12.09.2011 and source list dates changes to 05.09.2011 to 31.12.2011, system creates the schedule lines.
Could you please let us know, why the system behave like this?

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Order reservation should not get planned in mrp run

Hello friends,
Actually for a finished material i have created one production order by CO01.Because of it for semi finished material system created order reservation.I dont have any stock of semi finished material.Now i want while running the mrp run system should not planned this Order reservation of semifinished material.For these in configuration of availability check (Scope of check T.C OPJJ), I made the settings that system should not consider reservation (i deactivated the tick for include reservation) and for include depend reservation , i selected Donot check.And all these settings i made in checking group 02 and checking rule PP.After doing all these settings than also system is considering the order reservation for semifinished material and generating the planned order for it.
Do i need to do any other configurations?
Thanking you guys in advance.

Hi Jitendra,
Checking Control (OPJJ) has no relation with MRP.It is useful in the case of Plan and Production / Process Order only to find out Missing part.
Now come to MRP again.
You have a choice of only 3 type of stocks to include or exclude them during MRP run while rest of the things like (PO,PR,Reservation etc are consider by default)
Go to OPPQ and after selecting Plant go to Available Stock.You will find that options,
- Stock in Transfer
- Block Stock
- Restricted Stock.
And one more thing Reservation is not a available stock but its one kind requirement and if there is no stock then system will activate the Planning file entry and during next MRP run it will generate Planning proposal also.
Regards,
Dhaval

SL not getting generated via MRP

Hi,
Unable to generate schedule lines via MRP.
Settings:
Mat master - External proc , no spl proc
OA - Maintained
Source list - Maintained MRP Relevant - Indicator 2
Quota arrangement- Exist with only 1 vendor(same as of OA) 100%
MD03 - Planning data - Create PR (indicator-1), Create Sl(indicator 3)
Please let me know whether there is anything else which influence SL generation.

Resolved

Application logs are not getting generated in OIM 9.1.0.2

Hi guys,
We have created schedulers in OIM using OIM api to create,modify and delete the users.All our schedulers working fine.and we are able to do all the opeartions quite some time back.But we are facing an issue where the logs not getting generated when we run the schedulers.But while creating/modifying/deleting users from OIM webconsole we are gettinng the logs.Any help would be appreciated.
Thanks,
Pavan.

Have you configured the logger in your ljava class as well as log.properties of OIM

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

PR not getting generated in MD50

hello,
anybody please help me.
My scenario is make to order for FG & SFG. make to stock for RM & Packing material.
MRP TYPE : PD
For FG & SFG: Individual Requirement
For RM & Packing material: collective requirement.
RM & Packing materil Stratergy group : 10
Avilability Check : 02 (individual check)
My problem is when i doing MRP run by using MD50, Purchase request are not getting generated for RM & Packing material when there is not stock, no po & No PR. in MD04 it showing dependent requirement. again when i am doing MRP run with MD02 pr getting generated. please suggest how to resolve this issue.
my client is asking to generate PR at MD 50 only.
Thanks & Regards
bhakta

MD50 is for sale order planning, system will plan with respect to sale order only - you are considered the RM and packaging as a MTS scenario, then how the system will plan for RM and Packaging in MD50
are you procuring raw material with respect to sale order means
then for RM and packaging, remove the strategy group and maintain individual indicator, then run MRP in MD50, system will plan for RM and pacakaging material also

Planned order not getting generated at plant level

Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AM

Dear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

After firming planned order, new planned order is generating in MRP run

Hi Experts,
I am using SAP AFS. Planning strategy is 21- MTO with Project settlement. MRP type is PD. Lte size is EX. Procurement type is X.
We are using the production versions. Individual / collective reqmts is 1. Planning time fence is not maintained.
In sap AFS T.Code for MRP run is /n/afs/md02. After receiving the Sales order, MD04 screen gets updated accordingly and I am running the MRP.Planned orders are generated accordingly. I am firming the planned order manually through MD04. The satr mark is also appearing.
My problem starts now. If I am running the MRP again for the same requirements another planned order of the same qty. is getting generated. That means after the second MRP run, I am having two planned orders (one firmed plnd order) and second is the new planned order. My requirement is that MRP should not generate any new Plnd. order / PR's if there is no new Sales order.
The parameters for MRP run are "1" for "Create PR's", '1" for "Plng Mode" and '"1" for "scheduling ".
I have tried in all the possible ways, but of no use. Still new plnd order is generated after firming the 1st plnd. order in MRP run.

Thanks all for your feedback..
@ Vishal
1. Yes, Both Old firmed planned order and newly generated planned order have the same grid value
2. For both the planned orders :
Special Stock is E u2013 Orders on hand,
Consumption is V,
Sales order is the same (As we are using MTO , Strategy 21) and same WBS element.
3. First planned order is not in the assigned tab of MD04. This means that has been allocated to some object. u2013 I didu2019nt got this point. Can u please elaborate?
@ Nikhil
1. Quantity of sales order is not reducing after firming the sales order
2. Account assignment category for both the planned orders is u201CZu201D - Indiv.cust./project
I have made some more observations and found the following differences between the two planned orders
From MD04 , keep the cursor on corresponding planned order
& click on upward arrow ( available on bottom side of the report).
It will show what will be the originating requirements i e. for which requirements this planned order generated.
For Firmed planned order it is taking me to screen u201CPegged Requirements
u201D*And the following data is present:
Planned dates: 04.07.2010
MRP element No. 3100001185 (Sales Order No.)
MRP element item 100
Scheduling No. is 1
MRP element indicator - VC u2013 Order
MRP element data- 3100001185/000100/0001
Plng segment u2013 3100001185000100000
P.O / Order Type u2013 ZX
Rec/reqd Quantity 10
MRP element u2013 Order
For new planned order generated, I am going to Screen *u201CProcurement without Requirementsu201D
*The following data is present
Planned date 03.07.2010
MRP element No. 0000123522 (Planned order No. of the newly generated after MRP Run)
MRP element Ind. u2013 PA
MRP element data 0000123522/SO
MRP element item 1
Scheduling No. 1
MRP segment 20
Plng segment u2013 3100001185000100000
Rec/reqd Quantity 10
P.O/Order type- KD
MRP element u2013 Plnd Order

Process order should not take part in MRP run

Hello Colleagues
I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule PP but I was not able to get result. Could you please help, probably there are other settings?
Best Regards
Eduard

Hi,
Settings in OPJJ will take effect only when you create or release process orders.
As a work around you can try to exclude process order is
1. Create a Storage location and make it not relevant for MRP-OMIR
2. In Material master for the material in MRP assign storage location MRP as 1 (exclude storage location stock)
3. Create the process order, in the GR tab enter the storage location (not MRP relevant)
In the MRP run it will not take the process order into account.
After releasing change the storage location to the normal sotrage location.
In this process flow, the control is with the storage location.
Check it in your sandbox.
Thanks,
JK

Demand not getting generated on MRP run.

Similar Messages

Maybe you are looking for