Demand release through Info Provider data in decimal

Hi,
When I release the demand through Info Provider for a FERT items,after extraction of the data in info provider we get the data in fractions.
The demand was entered at the lowest heirarchy.
Kindly suggest how to over come this issue .
Regards,
Sadasivam R K.

when you release from DP to SNP the message is a warning. I think if you continue it will transfer to BM. Just that these sales orders in SNP will not work like normal sales orders. The warning explains more about this
/SAPAPO/REL_TO_SNP is the release of data from infoprovider to SNP. This is meant to allow only the FA, FB, FC and FD category orders only
The restriction is because there are more than just the category groups that go into a order type - for eg the ATP category or check mode
Now if you want your sales orders it would be a good idea to CIF it from R3 or use the sales order BAPI_SLSRVAPS_SAVEMULTI2 or use SAPAPO/SJKTST04

Similar Messages

Download info provider data in CSV

Hello BI experts,
i have a requirement to download the info provider data in a csv file. I am aware of GUI_DOWNLOAD Function Module but i am not sure which table should i use to extract data in a csv file. for example, if i need to download data from a infocube i need to write a program. can someone help me

Hi,
-> There are many options to download the data if you have application server you can mention the path (in listcube) where you want take the data and schedule a background job.
->You can also create a openhub on the cube and download the data.
Hope this helps...........
Rgs,
I.Ravikanth

Info Provider Data Space

hello
Can anybody let me know the procedure or any method to get that how much data space is occupied by an info provider at BW side?? Is there any T-code or any formula to get the space figure?
also can any body tells me that if I have a table (/BIC/B00004XXXXXXX) in BW then what does its info provider's name??
I search for all related documents not get the answer..
Thanks in advance
Neha..

Hi,
You can find the information in the Tcode: DB02, there you will have the option Table/View information, if you click on that it goes to the next screen, there you will have to give infoprovider tech name like /BIC/F****, then you can able to see the size and other information of the infoprovider.
Hope it helps.
Veerendra.

How to combine two Info provider data matained at different line items?

Hello Friends,
I have a requirement in which they want to combine the invoice line item data with the GL line item data , in which both are maintained at different line items.......
For e.g:
DSo 1:
Invoice no                Inv line item         Net price
5100000674            10                         300
5100000674            20                         400
5100000674            30                         200
5100000674            40                         100
DSO2:
Acc Doc no            Line item            GL account    Invoice number            amount
9480000000               1                      21110000         5100000674          100
9480000000               2                      31110000         5100000674          200
I tried Infoset, but multiple lines are generating..... as both the line items are maintained at different line items..... Please help me with some ideas and suggestions.......
Thanks for your time..............................................................................

Hi,
You should maintain the InfoObejcts (Charecteristcis) in both DSO's other wise it will disiplay # in reports.
1. While loading the data to DSO's use LOOKUPs in transformations and load teh full fledged data to DSO-2, (in sequence if it will come in second place.)
2. Check with InfoSet Innrr/Outer Joins option.
Else use FM based on both DSO's and cretae DataSourcea nd load the data to another DSO/Cube and build report on that.
Thanks
Reddy

Information Broadcasting(Event Data change in Info provider)

Hi All,
Does anyone have experince on the functionality Information Broadcasting ,Can you please help me where we use Trigger event when change in the info provider in the process chains.I want to know when we use the (Trigger event in the Broadcaster) in the process chains,how will it take effect in the Information Broadcasting scheduler screen when we select the particular Info provider when there is any data change.Can you please elaborate on the topic if any one has used the event data change in the info provider.Actually I Executed and scheduled the pocess chains, when I go to the Process chain log ,It says that the Job is finished and the data change is occured for the Cube,but I dont get any error message and I dont get any mail to my Inbox.Can you please through some light if anyone has worked on this,Answers are always appreciated and rewarded.
Thanks.

Hi,
Usually we trigger an event in SM64 tcode..if u want to create an event u will go for SM62.
In addition to time- and calendar-based job scheduling, the background processing system supports event-driven scheduling.
Triggering an event notifies the background processing system that a particular condition has been met. The background processing system reacts by starting any jobs that were waiting for that event.
Events are not saved. Once an event occurs and triggers any jobs that were waiting for that event, the event is discarded
U can monitor process chain via Tcode 'CCMS'..
Information broadcasting allows you to make objects with Business Intelligence content available to a wide spectrum of users, according to your own requirements.
Go through this
Information Broadcasting:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Including an Event Data Change in a Process Chain :
http://help.sap.com/saphelp_nw04/helpdata/en/ec/0d0e405c538f5ce10000000a155106/content.htm
Regards-
Siddhu
Message was edited by: sidhartha

BEX F4 help values from posted values in Info Provider not from Master data

We have an info object called Archival purpose and it is display attribute of Master data info object Archive Number. Both Info objects are used in a cube. Posted values in cube have only two value for info object Archival purose which is "EXCOM" and "EA".
But when we do the F4 in the bex query, we see some other F4 values. Although Master data is having other entries but we have defined in the bex property of both the info object to read the f4 value from the posted values in the info provioder.
Please suggest how to get values in bex F4 help only from posted values in info provider and not from the master data.
Thanks

Hi,
You don't need to change the Infoobject definition as it will become global and it will be applicable for whereever this infoobject is used. Instead you can manage this setting for this particular Infoprovider.
Go to RSA1 and double click on your infoprovider used for this query, go to change mode. From the right hand side dimension tree search for the Infoobject for which you want to maintain this property. If it is navigation attribute then you can search it in navigation attribute tree.
Once you find the infoobject right click and from context menu choose the first option "InfoObject specific properties". In the next popup in the last option about F4 values for filter you can select the option, "Only values from Infoprovider".
Regards,
Durgesh.

Error reading data from Info Provider

Hi Folks,
I am executing a report and am getting the following error message:
Error reading data of Info Provider.
System Error: Whole Number Overflow on Multiplication.
The infoprovider being read is a Virtual Info provider Based on DTP/3.x InfoSource.
Let me know what could be the potential problem here ? How would I fix such issues.
Regards
Arjun

Hello,
There is some problem in data. Check if in transformation u have any formulas or routines.
regards,
Shashank

Move out Info Provider to other server without transport connection?

Hi All,
Could you share you thought ?
Is there a possibility to move out the info provider design & info object to other server without transport connection ?
The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
Any thought from all of you ?
If you have the way, appreciate if you can share it to me.
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi,
From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it.

Info set , info provider and info spoke

Hi gurus plz give me the difference in between info set and info provider and info spoke. and give me what are the prerequisites are needed to process infoset, infoprovider and info spoke?
Regards
Vidhu

InfoProvider
An InfoProvider is an object for which queries can be created or executed in BEx
Check this for more,
http://help.sap.com/saphelp_nw04/helpdata/en/4d/c3cd3a9ac2cc6ce10000000a114084/content.htm
Infoset:
An InfoSet is a special view of a dataset, such as logical database, table join, table, and sequential file, and is used by SAP Query as a source data. InfoSets determine the tables or fields in these tables that can be referenced by a report. In most cases, InfoSets are based on logical databases.
SAP Query includes a component for maintaining InfoSets. When you create an InfoSet, a DataSource in an application system is selected.
Navigating in a BW to an InfoSet Query, using one or more ODS objects or InfoObjects.You can also drill-through to BEx queries and InfoSet Queries from a second BW system, that isConnected as a data mart.
The InfoSet Query functions allow you to report using flat data tables (master data reporting).Choose InfoObjects or ODS objects as data sources. These can be connected using joins.You define the data sources in an InfoSet. An InfoSet can contain data from one or more tables that are connected to one another by key fields.The data sources specified in the InfoSet form the basis of the InfoSet Query.
Check the link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
InfoSpoke:
Info spoke is an open hub destination defines to which target the data is to be relayed.
Check this link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
Check this doc also,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
Hope this gives you a good idea...

Two info provider in one query

Hi ALL,
i am currently looking at two info providers from where data needs to be pulled, but i am not able to get two info providers in one report while using the query designer.
is this a restriction. can i have more than one info provider in one report?
what would be the procedure to get two inf providers in one report
plz help....
Regards
Arvind Kumar

Hi,
You can create a report through query designer only on single InfoProvider(either Multiprovider, InfoCube, InfoSet, DSO,Master Data Object).
If you need to get data from more than 1 info provider you have create a Multiprovider which will include the relevant info providers, and then create report on that Multiprovider.
Hope it helps!!
Thanks,
Lavanya.

Which type of setting we need to maintain in query to get Multi Provider data

HI Friends.
I created query on top of Multi Provider. Multi Provider created on top of Hybrid provider and Standard cube.
When i executed the Query on top Multi Provider, i can't see the data of Hybrid Provider through Query.
In BW side i can see the data on Multi provider.
Can any one help me.

Hi,
First need to understand what is the use of Hybrid Provider in what cases we prefer provider.
Multiprovider :can be created based on DSO & Infocube
Hybrid Provider : Can Be created based on DSO / HybridProviders based on direct access.
For more Info on Hybrid Provider : Creating HybridProviders - Modeling - SAP Library
There are no settings to get Hybrid provider data Or Multiprovider data in Bex .
Even though if we need to do any settings we can do it in SPRO , check once in SPRO tcode related to Bex reporting settings.
Regards,
Seshu.P

How to find the activity of the Info cubes or any other Info Provider

Hello everyone,
Is there anyway to find out the last activity date of the info cube or any other info provider?
One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
I also need the Procedure to know the activity of the queries also?
Hope to get an answer soon..!
Thanks in advance..!
Deepak

Hi,
Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
I hoep it will help.
Thanks,
S

BI analysis authorization - Same info provider- diffrent access ?

Hi Gurus,
Designation of roles:
1. User is having two PFCG roles (A1 & B1) assigned.
2. Role A1 contains query name ZQRYA1 & Role B1 contains query name ZQRYB1
3. Role A1 is linked to analysis authrozation role AR1 and Role B1 is linked to analysis auth. role BR1 (thorugh S_RS_AUTH)
4. AR1 is having access to Company code 1000 & info proivder is ZIC_COPA
5. BR1 is having access to Company code 2000 & info provider is same ZIC_COPA.
Requirement :
When user is executing ZQRYA1, he should see only 1000 company code.
Result:
With above design user is able to see 1000 & 2000 company code data for ZQRYA1.
My analysis:
1. We should use Customer exit in the Query. (SAP note referred 668520).
2. As per SAP note 1000004 (Merging and optimizing analysis authorizations), I understand that if same info provider is there then BI analysis auth. will merge the values.
Please correct me if I understand something wrong. Also suggest how can implement role so that values will not merge.

Hi experts,
I am getting confused now.
As pe rmy practical experience for same info-proivder BI AA will merge the values. Even i got same response in SDN forums.
But when I raised this issue to SAP (OSS message), SAP says this issue should resolve by applying SAP notes through SNOTE..
1138708     Unauthorized data is displayed: "Not assigned" (#)
1158432     Too many values authorized for hierarchy with intervals
1234334     Authorization error for query on InfoSet
1229602     Error when using hierarchies: Authorization error
1226163     Authorization variables in workbook
1000004      Merging and optimizing analysis authorizations
1150754     Authorizations for InfoSet chars. ignored in input help
1235049     F4 help: Unauthorized data for referencing characteristic
I have gone through notes but did not find relevant, but still SAP replied it should resolve the issues.
Please suggest.

Cisco CME: calls through SIP-provider again

Hello,friends!
I have already published a discussion here https://supportforums.cisco.com/discussion/12089656/cisco-cme-and-calls-through-sip-provider and you helped me, everything works well for Russian numbers.
When I tried to add the configuration for calls to Belarus, again, there was a problem. I do not understand why, although the configuration ideintichnaya.
My config:
voice service voip
ip address trusted list
ipv4 178.16.26.122 255.255.255.255
ipv4 144.76.42.108 255.255.255.255
ipv4 176.9.145.115 255.255.255.255
ipv4 5.9.108.25 255.255.255.255
ipv4 78.46.95.118 255.255.255.255
ipv4 89.249.23.194 255.255.255.255
ipv4 178.16.26.124 255.255.255.255
ipv4 176.9.85.133 255.255.255.255
ipv4 46.4.53.86 255.255.255.255
ipv4 5.9.84.165 255.255.255.255
ipv4 78.16.26.122 255.255.255.255
ipv4 77.235.62.222 255.255.255.255
ipv4 81.88.86.11 255.255.255.255
ipv4 192.168.1.50 255.255.255.255
ipv4 217.150.198.44 255.255.255.255
ipv4 178.63.96.3 255.255.255.255
ipv4 178.63.96.28 255.255.255.255
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
sip
registrar server
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g711alaw
voice class sip-profiles 20
request INVITE sip-header From modify "\"(.*)\" <sip:(.*)@(.*)>" "\"\" <sip:[email protected]>"
voice translation-rule 9
rule 1 /^98/ /7/
voice translation-rule 10
rule 1 /^9/ //
voice translation-rule 1020
rule 1 /^.*$/ /141756/
voice translation-rule 1030
rule 1 /^.*/ /141756/
voice translation-rule 1040
rule 1 /^.*$/ /21/
voice translation-profile incoming
translate called 1040
voice translation-profile outgoing
translate calling 1030
translate called 9
voice translation-profile outgoing-mezhdunarod
translate calling 1030
translate called 10
voice-card 0
dial-peer voice 2 voip
description TO-RUSSIA
translation-profile outgoing outgoing
preference 1
destination-pattern 98..........
session protocol sipv2
session target sip-server
voice-class codec 1
no voice-class sip outbound-proxy
voice-class sip profiles 20
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte sip-notify
no vad
dial-peer voice 3 voip
translation-profile incoming incoming
incoming called-number 141756
voice-class codec 1
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description To-Belarus
translation-profile outgoing outgoing-mezhdunarod
destination-pattern 9375.........
session protocol sipv2
session target sip-server
voice-class codec 1
no voice-class sip outbound-proxy
voice-class sip profiles 20
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte sip-notify
no vad
sip-ua
credentials username 141756 password 7<pass> realm sip.zadarma.com
authentication username 141756 password 7 <pass>
no remote-party-id
registrar 1 dns:sip.zadarma.com expires 3600
sip-server dns:sip.zadarma.com
connection-reuse
host-registrar
DEBUG ccsip message:
Jun 17 14:23:09.033: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:09.089: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 407 Proxy Authentication Required
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65;rport=5060
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.6d40
Call-ID: [email protected]
CSeq: 101 INVITE
Proxy-Authenticate: Digest realm="sip.zadarma.com", nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1", qop="auth"
Server: kamailio (4.1.2 (x86_64/linux))
Content-Length: 0
Jun 17 14:23:09.169: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65
From: "Vankuver" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.6d40
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Jun 17 14:23:09.169: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:09.637: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:10.621: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996990
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A
All possible debugging has been turned off
DC#231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Debug voice ccapi inout:
Destination Pattern=9375........., Called Number=375298911396, Digit Strip=FALSE
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/ccCallSetupRequest:
Calling Number=141756(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=375298911396(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=Vankuver
Account Number=, Final Destination Flag=FALSE,
Guid=13366763-F540-11E3-AF35-FAC82C2E981E, Outgoing Dial-peer=4
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=141756
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=375298911396
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=0
cisco-rdnsi=0
cisco-redirectreason=0 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x6968AA04, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=141756,(Calling Name=Vankuver)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=375298911396(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=RegularLine, FinalDestinationFlag=FALSE, Outgoing Dial-peer=4, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
Jun 17 15:22:13.073: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.073: :cc_get_feature_vsa malloc success
Jun 17 15:22:13.073: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.077: cc_get_feature_vsa count is 2
Jun 17 15:22:13.077: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.077: :FEATURE_VSA attributes are: feature_name:0,feature_time:1819298856,feature_id:3371
Jun 17 15:22:13.077: //14427/13366763AF35/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
Jun 17 15:22:13.077: //14427/13366763AF35/CCAPI/ccCallSetContext:
Context=0x6C726BF4
Jun 17 15:22:13.077: //14425/13366763AF35/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=4
Jun 17 15:22:13.085: //14427/13366763AF35/CCAPI/cc_api_call_proceeding:
Please help me... I don't know what to do!

You need to contact service provider for this , after authentication challenge your sip provider is not sending any response.
Contact them and ask whether they had received INVITE with proxy authentication details or not.

Short dump when expand info provide

Dear all,
I have 0GL_ACOOUNT info object that act as a master data.
the problem is when I want to expand at the info provider instantly create short dump
the overview of the short dump is :
Runtime Errors         ASSERTION_FAILED
Date and Time          12.08.2009 10:08:16
Short text
     The ASSERT condition was violated.
What happened?
     In the running application program, the ASSERT statement recognized a
     situation that should not have occurred.
     The runtime error was triggered for one of these reasons:
     - For the checkpoint group specified with the ASSERT statement, the
       activation mode is set to "abort".
     - Via a system variant, the activation mode is globally set to "abort"
       for checkpoint groups in this system.
     - The activation mode is set to "abort" on program level.
     - The ASSERT statement is not assigned to any checkpoint group.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Information on where terminated
    Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBJ_DATA=======CP" -
     in "GET_TRFN_AWBSUBOBJ".
    The main program was "RSAWBN_START ".
    In the source code you have the termination point in line 23
    of the (Include) program "CL_RSAWBN_OBJ_IOBJ_DATA=======CM005".
Source Code Extract
Line SourceCde
    1 METHOD get_trfn_awbsubobj .
    2
    3   DATA: l_tranid   TYPE rstranid,
    4         l_s_source TYPE rstran_s_tlogo,
    5         l_s_target TYPE rstran_s_tlogo,
    6         l_objvers TYPE rsobjvers.
    7
    8   l_tranid = i_objnm.
    9   l_objvers = rs_c_objvers.
   10
   11 * get the source and target for the tranid
   12   WHILE l_s_source IS INITIAL OR l_s_target I
   13     TRY.
   14         cl_rstran_stat=>get_objects(
   15           EXPORTING
   16             i_tranid   = l_tranid
   17             i_objvers = l_objvers
   18           IMPORTING
   19             e_s_source = l_s_source
   20             e_s_target = l_s_target
   21                ).
   22       CATCH cx_rstran_not_found .
>>>>>         ASSERT sy-index < 2.
   24     ENDTRY.
   25 * for possible second run set objvers
   26     l_objvers = rs_c_objvers-modified.
   27   ENDWHILE.
29 * pass back the su
30   IF i_target = rs
31     re_awbsubobjec
32   ELSE.
33     re_awbsubobjec
34   ENDIF.
35
36 ENDMETHOD.
Please advice

HI,
I have read the sap notes and that is exactly what happen to me.
but I don't understand how to correct it.
It said :
This error cannot be corrected automatically. Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified (in the short dump, the TranID that is specified in the short dump is in the variable L_TRANID).
anybody know how to use delete_version_from_db ?
please advice

Demand release through Info Provider data in decimal

Similar Messages

Maybe you are looking for