DEMANTRA Error Another engine might be running currently on this schema

Hello Experts,
When i am running the Analytical Engine . I am getting the following error:-
DEMANTRA Error Another engine might be running currently on this schema, delaying for 22 seconds to make sure...
ERROR Another Engine is already running in Unknown mode.
Please make sure to stop all running Engines either in Batch or simulation mode before retrying.
I have tried all possibilitties like 1. SHUTTING Down database 2. Restarting my machine .3 Tried to kill the process using KillProcess.exe ...But nothing works.
I am getting the same error when ever i tried to start the Analytical Engine.
Please help!!!!!!
Thanks,
Neeraj.

Hi Shekhar,
Thank you very much for your response.
Steps for running the Analytical Engine:-
There are two ways and from both i am getting the same error :-
1. Start--> Engine Administrator --> Connect --> Run Mode = 'Batch' and Engine Profile = 'Batch' --> Run Engine.
2. Start--> Analytical Engine.
Log Meesage:-
07:48:35:109 [EngLogger.cpp,187] Logger General Level: info, UserLevel: message
07:48:35:109 Working with Oracle RDBMS
07:48:35:156 Database connection string: Provider=MSDAORA;Data Source=orcl User:
DPNEW
07:48:53:468 --------------------------------------------------------------
07:48:53:468 Oracle Demantra Forecast Engine Version 7.2.0 (290)
07:48:53:468 Engine Start Time 07:48:53
07:48:53:468 Running in Batch mode
07:48:53:468 --------------------------------------------------------------
07:48:53:578 WARNING Another Engine might be running currently on this schema, d
elaying for 22 seconds to make sure...
07:49:15:593 ERROR Another Engine is already running in Unknown mode.
Please make sure to stop all other running Engines either in batch or simulation
mode before retrying.
I also tried to Kill any existing running engine
1. Start--> Engine Administrator --> Connect --> Run Mode = 'Batch' and Engine Profile = 'Batch' -->
Selecting the Executable File Name = 'KillProcess.exe' --> Run Engine
Log Message
Usage: KillProcess [ProcessName]
However , this process keeps running and is not completing. I had to terminate the process.
Thanks,
Neeraj.

Similar Messages

Demantra - ERROR Another Engine is already running

Hi all,
When trying to run AE in batch or simulation mode this error occures:
11:29:11:924 [EngLogger.cpp,169] Logger General Level: info, UserLevel: message
11:29:11:924 Working with Oracle RDBMS
11:29:11:934 Database connection string: Provider=MSDAORA;Data Source=demantra User: demo711
11:29:12:354 WARNING Another Engine might be running currently on this schema, delaying for 22 seconds to make sure...
11:29:34:386 ERROR Another Engine is already running in simulation mode.
Please make sure to stop all other running Engines either in batch or simulation mode before retrying.
I found another thread with the same problem but no answer helped.
I tried running KillEngine.exe, KillProcess.exe, and several other intuitive solutions but none worked.
Waiting for guidance.
Thanks in advance.
AMC

Hi
Can you please check existing live DB sessions that are targeting the same DB user?
In case another person is using the same DB user as you, and started his Engine Manager, you'll get this error.
Please verify if there are other sessions open and kill them, if so

Microsoft Outlook 2010 Error "Another version of Outlook is currently running." when clicking on a mailto link

Our company recently upgraded from Outlook 2007 to Outlook 2010. The mailto links on an intranet work fine on local computers running Outlook 2010 but on the terminal servers, users are getting the following error:
"Another version of Outlook is currently running. Close it and try again."
I have made sure that Outlook is the default mail client.
Home & Business Click2Run has never been installed on the terminal server.
The error happens in standard as well as safe mode.

Hi,
What program is set as default for mailto?
Have you installed Home & Business Click 2 Run before? There is a limitation in click 2 run version that the mailto is trying to use your older version of Outlook.
If this is not the situation, try to test this issue in the safe mode.
Click
Start, point to All Programs, and then point to
Microsoft Office.
Press and hold the
CTRL key, and then click Microsoft Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
Please also set Outlook as the default email client on the computer.
======================
For Windows Vista/Windows 7:
1.
Click Start.
2.
Type "default programs" in the Start Search box.
3.
Click Default Programs under Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Office Outlook or Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Best Regards,
Sally Tang

Another process (thread) is applying transactions for this client:

Has anyone seen this error
'Another process (thread) is applying transactions for this client: MNEWMAN Try again later.'
We seem to be getting a few upload transactions put into the error queue for this reason, sometimes just executing the transaction clears it, but more often the data actually looks to have been correctly posted to the server as well as appearing in the error queue, as itf two threads have picked up the same transaction, one has applied it without error and the other failed
any ideas?

latest update from Oracle is to
1.Set MAX_APPLY_TRIES=5
2.Set APPLY_TRIES_DELAY=10
Done this, but waiting for sufficient activity to see if it solves the problem.
I had thought about knocking max_threads down to 1 (and might do this to try and isolate some odd performance issues), but the problem is that this would make the apply and compose process take three times as long (we use 3 threads), and that will not be acceptable for long on the live system

SAP j2ee engine is not running error while applying patches.

Hi all,
Iam in the process of aplpying patches using JSPM tool , for some of them iam getting the error messages , when i checked the log file for this tool it says:
SAP J2ee engine is not running , unable to login to <HOST name> with id <Login id>.
Iam very new to this activity ,can anybody help me in this regard , i wil be very thankful.
Thanks and Regards.
Niyati.

Hi,
What exactly do you see when you say that the status in the MMC is OK? I don't think it can be green if you say that you get a message saying "Service Unavailable" when you try to login. If you get that message, it means that the service hasn't either been started or could not be started in case of an error. In this case the server status in the MMC should be yellow (or gray in case none of the services could be started)...
Could you perhaps check it again? Another point to check would be if the connection to the database is OK. If you are using MySQL MaxDB, you could use the Database Manager tool to check this. Sometimes the log files fill up the database and the server cannot start because the database is full. In such cases you will need to clear the logs and then restart the entire cluster.
Sameer

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
Run TimeError Message Presented when InDesign CC 2014 runs:
Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
Show this alert again?

As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
Thanks,
Manan

How to invoke a process that is running in another Engine

Hi, All,
I looked through the OBPM 10.3.1 docs, I found "Subflow Activity" and "Process Creation Activity" can invoke a process that is running in another Engine. But in the OBPM studio, I cannot find any properties of both activities to configure this function.
Any ideas? Thanks in advanced.
Best Regards,
Bill

Hi Bill,
Brijesh is right. Although you cannot test it in Studio, there is a synchronous and an asynchronous way on Enterprise to create an instance in another process even though they are not in the same project.
1. For an asychronous (fire and forget) invocation of a subprocess (similar to the Process Creation activity), when you deploy to Enterprise you can use PBL to create an instance. Look at the Catalog's Fuego.Lib.ProcessInstance module and note the create() methods.
2. For a synchronous invocation of a subprocess (similar to the Subflow activity), you can create an instance in another process using the Dynamic Subflow property of the Subflow activity.
Hope this helps,
Dan

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

ResourceServlet Error - Oracle Suggested Not To 'Run' App?

Hello All,
We are migrating java/adf application from 10g(hosted on OAS;using Jdev10g) to 11g(on Weblogic;using JDev11g).
We are getting the following error when the 'page' is 'run' (right click on Login.jspx and click on 'Run'):
Caused By: java.lang.*ClassNotFoundException: oracle.adf.view.faces.webapp.ResourceServlet* at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
 at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
 at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
 Truncated. see log file for complete stacktrace
>
[03:44:25 PM] Deployment cancelled.
We did some research and found Frank Nimphus's reply to a similar query as follows:
Hi,
the resource servlet no longer is
java.lang.ClassNotFoundException: oracle.adf.view.faces.webapp.ResourceServlet
but
*<servlet>*
*<servlet-name>resources</servlet-name>*
*<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>*
*</servlet>*
*(look in your web.xml)*
Frank
On another blog by Shay Shmeltzer (http://blogs.oracle.com/shay/entry/common_pitfalls_when_deploying), it is recommended that
When you create a regular Fusion application you get two projects a Model one and a ViewController one.
If you right click the ViewController one and choose deploy you'll be able to create a WAR file and directly deploy to WebLogic, but then you might run into an error message which will have this line somewhere in it:
java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
The right way to deploy the complete application is to do it from the application level menu - where you'll find another deploy option - this will create an EAR file that will deploy successfully.
But it is not possible to deploy the application every time after every small code change. We 'Run' the application several times a day after making code changes and that is not happening now because of the error. Please suggest a solution. I think Frank Nimphus is giving a solution, just that we are not understanding it.
Thanks,
Edited by: user12054715 on Sep 8, 2011 6:10 AM

I think Frank Nimphus is giving a solution, just that we are not understanding it.Look into the web.xml file, see if you can find oracle.adf.view.faces.webapp.ResourceServlet, replace that with org.apache.myfaces.trinidad.webapp.ResourceServlet...
Cheers,
Vlad

Infopath Form error - validation errors that are not in the current view?

Hey Experts,
I have a Sharepoint 2010 server running on Server 2008. We have a list that has a custom form created using infopath for editing and new creations.
The problem appeared after a server restart.
Users can no longer create a new item in the list when they do they get this error:
The form contains the following errors:
Field or group: my:Author
Error: Cannot be blank
When I try and preview it in infopath2010 it also does the same thing but provides a more detailed error:
Infopath cannot submit the form because it contatains validation errors that are not in the current view. Errors are marked with a red astrick or red dashed boarder.
If you cannot find an error in otherviews, there might be a problem with the forms design.
I checked all thru the form for my:Author field and can't find it on the page as a control or in the list of fields. Any recommendations?
Thanks!

Didn't know you also created this as a thread. If you send me a direct email in the future, please let me know you also created a thread so that I can answer publicly to help others and to get credit for the time/effort spent. Thanks.SharePoint Architect || Microsoft MVP ||
My Blog
Planet Technologies ||
SharePoint Task Force

Java.lang.Error: Properties init: Could not determine current working direc

Hi,
We have an application which will copy all the files from a directory on the main server (manager) to all other servers in the cluster.The process is little bit tricky in the sense that all servers will pull the data from manager, copy it to a pending directory and then shut down the rmi process on them, rename pending directory with the original name (some name) and start the rmi process. All the communication is done using RMI calls. We use a GUI tool on windows to initiate this process. We are also running some shell scripts from java in this process. We run this process daily.
The problem is, once in a while we are getting the follwing error on some of the servers in the cluster and the data updates are not happening any more.
Error occurred during initialization of VM
java.lang.Error: Properties init: Could not determine current working directory
We had to start the rmi process on the server again where it failed with the above error and Initiate the process again from GUI. Any ideas, why we get this error? Also, why only once in a while? Our application is running under root context, so i think, running as "root" is not an issue as I see on some of the forums. Any help is greatly appreciated.
Thank you

It is possible to remove or rename the working directory of a running process. It (or a child process) might then have trouble when looking for its current working directory.
posman@linux:~> mkdir scratch
posman@linux:~> cd scratch/
posman@linux:~/scratch> pwd
/home/posman/scratch
posman@linux:~/scratch> rmdir `pwd`
posman@linux:~/scratch> bash
shell-init: could not get current directory: getcwd: cannot access parent directories: No such file or directory
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
dirs: could not get current directory: getcwd: cannot access parent directories: No such file or directory
posman@linux:~/scratch>

Could not start SDM Server - another Server may be running already

Hi
I have some problems with SDM after upgrade to SP16.
Right now i can't neither start it, nor change password..
it has an error but i don't understand it, because i have only one instance and the server is stopped.
I'm enclosing the error, please, if you have some ideas let me know.
Thank you.
Oct 10, 2006 12:34:29... Error: ERROR: Could not start SDM Server - another Server may be running already.
Oct 10, 2006 12:34:29... Error: Another SDM is running already for this SDM_HOME directory. Exiting. Throwable: com.sap.sdm.client_server.launch.SDMRunningException Throwable message: Another SDM instance is running on this host
Oct 10, 2006 12:34:29... Error: Could not start SDM. Processing error. Return code: 4

A lot of thanks of your answer (both of you)..
None of the prerequisits of the note exists on my system.
"1)There is a started SDM server on the system. All SDM commands have to be executed when there is no started SDM server. Or SDM port is busy by another application."
Server is on red color. I had reseted all tha instance, nobody use it, any applications.
"2)2. The executed command can be run only if SDM is in standalone mode."
Yes, i ran before the next command: Execute :
sdm jstartup "mode=standalone" "sdmhome=C:/usr/sap/<SID>/<Instance>/SDM/program"
"3. SDM port is busy by another application."
the port is only used for sdm wich is off...
Anyway, in order to get the solution, i started with the steps described on the note, but i had a problem with the StopServer.bat
3.Run
StopServer.bat (for Windows)
When i run it, i got another message (i though a similar one):
"Sending shutdown on port 50018
Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Could not shutdown server.
Details: Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Processing error. Return code:4"
Any ideas?
Thank you.

Error message "Firefox is already running but is not responding" - I have read and action the KB - no fix

So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and does not resolve the overall issue.
I have also uninstalled and reinstalled the application.
So why do I get the Error message "Firefox is already running but is not responding"?

See also:
*http://kb.mozillazine.org/Profile_in_use
Note that in Firefox 13+ (expected to be released June 5) the parent.lock file is no longer deleted after closing Firefox to make it possible to check for startup crashes, so the presence of that file will in the future no longer indicate a problem.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

DEMANTRA Error Another engine might be running currently on this schema

Similar Messages

Maybe you are looking for