Demarc question for new construction & installs RG6, RG9, Cat5e, Cat6????

I am having a new home built in a neibrohood that has GigaPower in Austin.. What I can't seem to find out is what kind of connection GigaPower uses from the outside of the house to the inside of the house? I need to tell my builder what kind of cabling to make sure is connected between the demarc and my networking cabinet. (for instance does GigaPower actually connect a fiber all the way to the modem? or does it connect to a transeiver on the side of the house and convert to some form of copper... and to that end what form of copper?) Thanks all

The Optical Network Terminal (ONT) mounted on the outside of your house will be connect to the Residential Gateway on the inside of your home using Cat 5e/Cat 6 Ethernet cabling.
My understanding is that the ONT is powered by an AT&T provided Power Supply Unit plugged into a wall outlet inside your home within 100' of the ONT. This contains more inforrmation (though I'm not sure that the BBU information is current).
http://www.att.com/support_media/images/pdf/uverse/b2c154417_battery_backup.pdf

Similar Messages

Question about pre-approval for new construction

I am interested in doing an FHA loan for a new construction home. The builder allows buyers to put down only $2000 upfront if you get pre-approved through their preferred lender. My question is do we have to have ALL the monies we need for down payment and closing costs in the bank before the lender will do a pre-approval? We still need to save a bit but I know we will have everything by the time the building is completed and it's time to close on the loan. Any folks out there with experience that can help me understand how it might work? I don't want to be premature on applying for the preapproval but I'd love to start the process soon if possible.

I am a sales counselor with a national home builder. We require preapproval with our lender in order to sign a purchase agreement. AT signing we require an earnest money deposit [not to be confused with downpayment for mortgage purposes] and it varies from $3,000 to $10,000. The EMD is kept in escrow and is returned to the buyer at the closing table. A downpayment is how much money the buyer is bringing to the closing table and that determines how much mortgage money your lender will deliver to the closing table. The EMD can be used for downpayment as it remains the buyer's money. At our discretion, we will allow a buyer to sign a purchase agreement and allow them to save for the downpayment over the 5 months of construction time. It is always preferable that the downpayment money is already sitting in an account up front ... but that is not always the case. It reallly depends on the builder whether or not the downpayment has to be already available at preapproval time.

Migration Question for New Leopard Mac Mini

Oh my... I have a new Leopard Mac Mini still in the box!
I want to connect it up and migrate my iTunes and iPhoto libraries, etc. to it from my old Mac Mini but here's the thing: my old Mac Mini is a G4, powerpc mac has been through a sort of mini **** lately and at this time will need it's hard disk repaired before I will be able to get it back up to 10.4.11 and Safari 3.0.4. that it had had only last week, before all manner of disasters happened after the last security update. Genius bar made it relatively functional by re-installing the OS but they used 10.4.7 and Safari 2.0.4. to do it! So here is my question: Do I need to get my PPC Mac back up to snuff completely before I can migrate stuff from it to the new Leopard Mac Mini or can I do the migration and get everything nice and lovely on the new machine even though there are still problems on the old Mac Mini?
Here is the problem that the PPC G4 Mac Mini has at this time:
Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Would this pose a problem in the migration?
Any help and advice would be greatly appreciated! Thanks so much! -Charlotte

The best thing I can say about your post is that at least you realize that Installing Leopard on a broken Tiger and a G4 processor files is exactly how hundreds of the problems are being caused. Too many people have decided that "Apple Just Works" and figure that installing the newest most complex MacOS ever will just work. These people are getting "worked".
Good Luck cleaning up your machine to tip-top shape to 10.4.11, with every update for every program you intend to transfer. Your drive must be squeeky clean, or you will have problems that nobody can explain. I'd recommend removing any applications you don't have to have or that you can reinstall easily with a program like App Zapper and get rid of the G4 system files as much as possible.

Selling old iPhone 3g - erased, removed sim questions for new buyer

I have an old 3g that we have service turned off on, i did the erase all content thing and removed the sim, phone restared and said I needed to hook it up to itunes and it needed the sim againput the sim back in, got the phone back to what looks like day one (then removed the sim after itunes set it up as a new phone vs using exsiting restore or backup).
So now the phone has no sim and everything appears to be there in terms of the basic apps nothing i can see has any of my info or history on it.
My question is if I sell this like this how does the new buyer install apps on it thru the app store, i can access wifi and watch youtube stuff but when I tried to install a free app but it just keeps asking for existing or new acct, if they setup a new acct and that 3g has no sim card will they be able to access and download content to it (also if they setup a new acct in itunes can they purchase apps with that too)?
I am pretty tech dumb when it comes to that sort of thing, noting sensitive on the phone realy even before the erase, but if i sell it like this I just didnt want the new buyer to somehow be able to buy apps on my acct (the itunes existing acct stuff is all blank I checked it), but i do want them to be able to get apps on the phone for their own use thru wifi so I am guessing they just have to create their own itunes acct and then even without the sim it would let them grab apps?
Or do they need a sim, if so will att give them a blank or is the phone basically useless without it (I thought I heard never give out my sim even tho the phone is deactivated I wasnt sure on security).
Thanks for anyone who can clear this up for me, don't wanna sell it and find out i didn't follow some rule of safety for my own acct etc.
Bill

Settings > Messages > iMessage > Off
Settings > FaceTime > Off
Settings > iCloud > (Scroll Down) Delete Account
Settings > General > Reset > Reset All Content and Settings.
In that order and you're good. I've never removed a SIM before selling and I haven't had any problems. Also they would need a new SIM to activate sevice so any potential for your information going to the device after sold is gone.
Hope that helps

Standard Business Questions for new FI/CO implementation

Hello,
    Can anybody please provide a standard lists of questions to ask Business persons for FI/CO implementation or suggest where can it be found/available. kindly send to this email : [email protected]
Please assist in this reagard as it is very urgent.
Points will be given generously.
Thanks

Hi Ashwin,
Please Find below the some of the general questions asked for a new implementation.
1)     Describe in as much detail as possible of the business at your location and its processes regarding
2)     Prepare a complete list on all legally required reports, forms and templates (e.g. Financial Statement Versions Balance, P&L, Cash Flow Report, Expense Report, Reconciliation Report about Diff. US GAAP / local Tax Law, etc).
3)     Will you need an interface to other external software? (e.g. payroll, taxes, barcode, etc.).
Please list and give a brief explanation.
4)     Please list all your required payment terms.
5)     For the creation of vendor tolerance groups (price, no quantity) please give appropriate details.
6)     For the creation of automated journal entries, please give a complete overview on the assignment of cost elements to cost centers.
7)     As a preparation on the mapping of the chart of accounts, please prepare a complete list of all required accounts that will have to be assigned to the new number ranges, in the Global Chart of Accounts.
8)     Is there a legal requirement for an alternative chart of accounts for your entity?
9)     Please prepare a complete list of all the common payment methods you have in use
10)     Please deliver a complete list of national bank indicators and codes
11)     Will you need different payment formats for different countries? Please give an overview.
12)     Provide An Organisation Chart (Bring a copy with you)
13)     Provide your Current Chart of Accounts Listing (Bring a copy with you)
14)     Provide a list of Cost Centres
15)     Request from the bank complete bank directory listing relevant bank information for all banks in your country.
16)     What types of transactions are typical for each account
17)     Approximately how many transactions are processed daily on each bank account?
18)     Do you currently receive bank Statements in manual or electronic format?
19)     How do customers typically pay
20)     Please provide a list of all the currencies you currently deal with
21)     Prepare a sample each of the month- end / year- end closing schedule
Please assign points if found useful
Regards
Genie

Old user, questions for new forums

the last time that i needed to DL extensions was right after
the macromedia/adobe merger. being a longtime dreamweaver user, i
was very familiar with the exchange and had no problem with it
except that i was a bit slow to browse through. and, also, being a
longtime photoshop user, i was familiar with the adobe
support/downloads/forums etc. as well.
i have a new computer and am now using dw 8 and am looking
for some dw extensions. the exchange no longer lists information
about the software compatibility of the extensions. so i came to
the forum to look for information. the dw general forum lists
119814 topics, and yet i can only access 2 pages (40 topic).
my next step was to seek out a _forum_ forum. the closest
thing i found, linked from
http://www.adobe.com/support/forums/index.html
(which also links to this forum) was under general/forum
comments. i discovered that it required a different log-in
procedure, requiring a first/last name for user, instead of the
email address that this forum requires. well, this turns out to be
defined as a &quot;user to user&quot; forum and
restricted to only that. for example, the faq had a question
regarding downloads (i'm thinking maybe i'll find a link to a
better-functioning dw exchange). but the answer to this
&quot;faq&quot; was &quot;there are no
downloads in the user to user forum&quot;.
i want to be able to get dw extensions and to locate a forum
that addresses this activity. i also want to locate a forum that
discusses the functionality of the support forums in general.
and, possibly, most importantly, i want to be able to access
more than just the 40 most recent postings in a forum that claims
to have almost 12,000 topics.
thanks,
jf

Did you logout from the old account and do the delete from the new administrator account? You may have to click the padlock at the lower-left if it is locked.

Cisco ACS questions for new deployment

Hi all, I am designing a new Cisco ACS deployment to handle AAA services for all our network devices. I have read the user guides and I understand the different deployment scenario's. However, what i could not find in the user guide, were answers to the questions below...
Number of AAA clients, using command authorisation, that a single ACS server can handle?
Does a Large Add-On license (for more than 500 nodes) need to be purchased for every ACS server, or does one license cover the whole deployment?
How is AAA load-balancing performed? Does each AAA server need to be defined individually on every Network device? Or is there some intelligence build in to the AAA servers so that they can distribute the load themselves? Or can a load balancer be used like you can with Cisco ISE PSN nodes?
Thanks
Mario

Supported number of clients depends on License for example
The base license is required for all deployed software instances and for all appliances. The base license enables you to use all ACS functions except license-controlled features, and it enables standard centralized reporting features.
The base license:
Is required for all primary and secondary ACS instances.
Is required for all appliances.
Supports deployments that have a maximum of 500 NADs.
The following are the types of base licenses:
Permanent—Does not have an expiration date. Supports deployments that have a maximum of 500 NADs.
Evaluation—Expires 90 days from the time the license is issued. Supports deployments that have a maximum of 50 NADs.

Video card question for new iMac

Howdy all,
I'm about to order a new BTO iMac, and I'm wondering if somebody could give me feedback on the two different video cards available.
Cost is not really a concern here (I would rather spend more on the video card and cut back on something like RAM for now because RAM can be upgraded later). My main concern is performance and the best image quality.
I understand the NVidia would be faster for 3D gaming than the ATI - which I would use a little bit. So the NVidia would seem to be a no-brainer.
However, I've heard a couple people (on various forums) state that although the NVidia is definitaly faster for gaming - it performs slower than the ATI at some tasks like iMovie and iDVD tasks and text scrolling and motion are not as good.
For me, I would love to have the faster 3D gaming speed of the NVidia for the few times I do game...but the most important thing to me is image quality for things like photo and video editing, working with documents etc. Are any of these thoughts regarding the NVidia vs ATI true?
Does anybody have any advice regarding the performance these two cards? Any help would be really appreciated. Thanks!
Sully

I had the 20" 2.16 (late 2006 model) with the x1600 128MB and now have the 24" 2.8 2600Pro 256MB and 2G stock RAM. It's night and day with Call of Duty 2. I am able to play COD2 in 16:9 mode, all graphic settings max'd out and the fps? Wow! One most maps it ranges between 190-270fps! That smokes the previous version of 40-90fps. One the most complex maps my 24" drops to 90-110 range. Seriosuly, anything above about 60fps is perfectly playable! I'm thrilled with the stock card. However, COD2 is older, I play it native in OS X and do not game in boot camp. That may change a few things.

Where can I get Net 8 on its own for new remote installation?

I require to install Net 8 on a remote SQL Server/Windows 2000 Server and as the connection is very delicate I need to just copy the installation file for Net 8 across.
I have it in our 9i pack and on the Oracle Forms and reports CD but how do I get it on its own? Is in on a resource pack?

I haven't seen a small (standard) install since 7.3.x. Do you need 8.0.x or 8.1.x?
I guess you could try in your PC first to customize a stage area to cut down on some subdirs/files. Maybe it's easier to just send the CD by mail?
At a minimum OCI, Net and RSF files are required, maybe ~50MB (or less?). But there's no real minimal standard Client install. (Maybe 10g Instant Client will change that!)

Audio question for new tv

Hi all.
We bought a new panasonic plasma and pick it up tomorrow and the ONLY audio out is the (DIGITAL AUDIO OUT) and my receiver has only a (Digital sa-cd cd input) and Im hoping that that input on the receiver will work with the out of my tv. I think that because it's still a digital input on the receiver it's going to work.
PLEASE tell me this will work.
Thanks for any help offered. heres a pic of the input if that makes any difference
Solved!
Go to Solution.

Does the connector on the TV's output look the same?
There are two fairly widely used standards for digital audio:
Coaxial S/PDIF (usually an orange RCA connector)
Optical (often called TOSLINK) - the input on your receiver is a TOSLINK input.
It looks like you just need a TOSLINK cable between the TV and the receiver. You may need to tweak the TV's settings to output an audio format the receiver understands - TOSLINK allows for many different formats, but many receivers only support a subset of them. (Raw digital stereo at 48 kHz and Dolby Digital are supported by nearly everything. DTS is less well supported, as are higher sampling rate raw formats.)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Streaming question for new upgrade - loading library

It appears that with the new version, if I'm streaming, and if I go out of music to check or change settings, or do some other function, that when I go back to listening I have to load the library and wait for it. This is new, right? and a pain.

It's true. I ended up switching to syncing just a small portion of my library. I've found when I do this, it doesn't try to load the library each time, but all the un-sync'd items are still available in atv for streaming.
This is not a great upgrade, in my opinion. Lots of strange stuff - like if you do set up true streaming all your media ends up in the menu item "shared..". The way Apple locks down atv to the local network, wouldn't all shared media be "my" media? Why separate out the My stuff from the Shared stuff? Simplified User Experience is not a phrase I'd use to describe the 2.0 upgrade.

Coaxial cable for new build installation

Hi folks, We are waiting on the completion of a new build and as part of our list of requests of the developer they have agreed to fit Sky TV cables for us while they are doing the rest of the first fix. We were invited round yesterday to view the work so far and it looks like they are fitting two runs of their standard coaxial cable rather than the "shotgun" type satellite cables that we're used to Sky installers fitting. Will this standard coax be suitable for HD and be future proof against UHD broadcasts? Many thanks!

It really depends on what type of coax it is. For best results it should be WF100 coax cable or its equivalent (foam dielectric, with both copper braiding and copper foil screening). Sky use 'shotgun' WF65, I believe.

10.4.8 for New Computer Installable on Old Computer?

I recently bought a new MacBook Pro to replace/upgrade a 3+ year old PowerBook G4 running 10.2.8. Can I use the OS install disks for 10.4.8 that came with the MacBook Pro to install Tiger on my old PowerBook (it has sufficient RAM, HD space and other technical requirements)? If so, is there anything special I need to do to avoid losing any applications or other items on the older PowerBook? (I have already successfully transferred everything from the PowerBook to the new MacBook Pro.) Thanks for any assistance.

"Can I use the OS install disks for 10.4.8 that came with the MacBook Pro to install Tiger on my old PowerBook"
No. The MacBook is Intel based. The Powerbook is not. An OS for Intel macs will not install on PowerPC based Macs. besides, even if you could it would be illegal, as you'd be violating the single-user license agreement that accompanies the MacBook.

Hardware question for new guy (you got to start somewhere)

Hi,
As the title states I am a complete novice so please bare with me. I'm confused about the correct configuration of the equipment that I have. So I'll start with what i have:
Live 4 vocal harmonizer,
Mackie 1202 VLZ3 mixer
M Audio Profire 610 Firewire Interface
New iMac Computer w/ Garageband & Logic
Adam A7 Monitors
The Profire 610 is new and I'm not sure how it works into the mix. Currently, I have my guitars and microphone going into the vocalizer. Out from the vocalizer and into the mixer. Out from the mixer to the monitors. I know the 610 should be connected to the computer via the firewire cable. What I am unclear about is where it fits in the above mix. It makes sense to me that it would come last to allow any effects/control to be recorded by the computer. Is that right? If so, this would mean that I would go out from the mixer and into the 610 interface? If this is the case, I would disconnect the XLR cables going into my monitors and insert them into the interface, and then buy 1/4 in to XLR cables to go from the line output of the interface back to the monitors. Does all that sound right?
Also, I have a slight hum coming from the monitors at higher volumes. Is that normal or is there a way to reduce/eliminate that?
Thanks so much for your help, I hope to be much more adept at this in the coming months.
Thanks again,
Charlie

For the hum, I would suggest unplugging the speakers first (take the cable out of the speaker and not the mixer). Turn up the volume- is the hum still there? If so, you power may be an issue- you might want to invest in a power line filter. If not, then plug the speakers into the mixer- do you get the hum? If so, make sure that you don't have all the 12 channels cranked up (zero everything and start going through each channel to see if you get the hum- it could be a bad slider/pot or a power issue on the mixer). Keep going through each piece until you find the culprit.

Capitalization question for new iPod

Okay - this will probably sound pretty dumb to most - but it's bugs the crap out of me...
Just got the new iPod yesterday and in my list of groups the following happened...
"Day of Fire"
"Robert Randolph & the Family Band"
the words "of" and "the" are not capitalized - they used to be on my other iPod. There are other groups - "Cord Of 3" and "Sixpence None The Richer" whose names are just fine. I went into the "info" and "sorting" tabs - and all are correctly capitalized in each spot the names come up... Just wondering if anyone has any clue on how to get every single word capitalized...
Markaaro

Believe it or not, I don't know how to release the
shuffle from the clear plastic pack. I am afraid of
breaking something. I've removed the clear tape that
holds the top in place, but nothing else is moving
without force, and I don't want to use force. I am
sure millions have succeeded in releasing their iPods
from the original package. Advice anyone?Thanks in
advance.
Look carefully at the package and you'll see a seam whereby you can separate the halves with a thumbnail (or equivalen sharp object).

Demarc question for new construction & installs RG6, RG9, Cat5e, Cat6????

Similar Messages

Maybe you are looking for