Demo for SAP ERP 6.0 EhP 3.0 BAIO with 2 clients

Hi!
I successfully configured SAP PI and have a SAP ERP 6.0 EhP 3.0 BAIO with 2 clients.
ERP: 100 (Business System A)
ERP: 200 (Business System B)
Which scenarios can I start with (ABAP Proxy, RFC-to-File, etc.) and where can I find the appropriate documentaiton therefore?
Thank you very much!
regards
Holger

Hi,
Please kindly check the SAP note 1402868.
This note refers to language on EHP4.
After the EHP, some packages are delivered, and for those packages, the
Language Supplementation is required.
Please refer to the sap attached note 330104.
This note explains about the packages that need supplementation after
the EHP.
Regards,
Paul

Similar Messages

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

Language Packages for SAP ERP 6.0 EHP 4 (NW 7.01)

Hello,
I have installed EHP4 + NW 7.01 on a running ERP 6.0 system with SAPEhpI.
Now I am not really sure if the implemented languages are also "upgraded" successfully.
The following languages are implemented additionally:
Serbian (latin)
Slovakian
Ukrainien
Romanian
Hungarian
1st question:
When I execute SMLT, there I can see the languages with a green traffic light.
But when I look in the "Detail Information" I can see some warnings (screenshot: http://img175.imageshack.us/img175/2291/ehp4system.jpg) for example:
"System component: EA-APPL 604 <- 600".
Is the language-part of this component still on release 600?
In cause of that I have to implement the specific packages?
2nd question:
I also execute the report "RSTLAN_IMPORT_OCS" in SE38.
Here it displays some "red marked" components which I must implement and some "yellow marked" components which I could import for this language.
The red marked components are sometimes old releases for example ST-PI 2005 but 2008 is already installed.
Is it needed that I reimplement all of this displayed packages for the language?
Thank you for your help.
Michele

Hi,
Please kindly check the SAP note 1402868.
This note refers to language on EHP4.
After the EHP, some packages are delivered, and for those packages, the
Language Supplementation is required.
Please refer to the sap attached note 330104.
This note explains about the packages that need supplementation after
the EHP.
Regards,
Paul

Enhancement Package 5 for SAP ERP 6.0 - Webinar Series - Oct-Nov 2011

Webinar Series: Enhancement Packages for SAP ERP
Innovation Made easy!
SAP enhancement packages (EHPs) are optional add-on packages that enable you to selectively install and use new functions without a major release upgrade. Since May 2011 enhancement package 5 for SAP ERP 6.0 is general available. With this latest enhancement package more than 500 business functions are delivered in order to improve or enhance the various SAP ERP application areas, industry solutions and usability.
Customers running SAP ERP 6.0 can benefit by installing SAP enhancement package 5 and switch on any of the new business functions.
Get insights and an overview of whatu2019s new with SAP enhancement packages and how innovation is made easy. Join the upcoming webinar session series covering what you need to know about EHPs and activating new functions and the major improvements in SAP ERP Financials, SAP ERP HCM, SAP ERP Operations and the areas of usability and user interfaces.
In one-hour sessions SAP Experts will introduce the new functions; provide a u201Cliveu201D experience on selected topics and will be available to answer your questions.
Target group: These webinars are pointed to IT-managers, business managers, business analysts and business process experts.
Cost: Joining these webinar series is free of charge.
Language: English
Dates: Oct 13 to Nov 29, 2011
Region: Americas
Topics included
     Enhancement Packages for SAP ERP: Innovation Made Easy - Learn how to do it
     Enhancement Packages for SAP ERP: What is new in SAP ERP Operations?
     Enhancement Packages for SAP ERP: What is new in SAP ERP HCM?
     Enhancement Packages for SAP ERP: What is new in SAP ERP Financials?
     Enhancement Packages for SAP ERP: What is new for User Interface and Usability?
To register please visit http://www.sap.com/mk/get/ehp

Hi Partson,
It is needed to connect this system with solution manager and create stack.xml using
maintanance optimizer. The main aim of this is to let you know what usage types/ functionalities are to be
selected from stack.xml.
It is also needed to download all the required support packs/ addons using maintanance optimizer.
If you have DVDs containing the same product that matches with stack.xml, you can provide them.
But the safest way is is to give all the tasks to solution manager , It will create , and download neccesary sps, addons to your
download basket.
Thanks and Regards
Purna

Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

Dear Experts,
We have solution manger 7.0 ehp1 ,
ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages In Miantenance optimizer I am getting the error.
Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
thanks

Hello,
we have the same error in our environment.
Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
" No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
Anyone with a solution here?
Greets
Jens

Component Version "SAP ERP 6.0" instead of "EHP 4 for SAP ERP 6.0 /7.0"

Hi All,
We went to ERP Enhancement Package 4 in ours SAP Systems.
We performed the upgrade (with the SAPehpi tool) in DEV and TEST, the weird part is that in DEV the System Data - Component Version shows "SAP ECC 6.0" and in TEST shows "EHP 4 for SAP ERP 6.0 /7.0".
The 2 systems have the same SP level.
Any idea ?
Thanks,
Juan.

Hi,
After EHP4 upgrade it should show ECC 6.0 only.
check below thread:
/thread/1432042 [original link is broken]
Thanks
Sunny

EHP 6 for Sap ERP availability

Dears ,
I'm planning to upgrade to EHP5 a lot of ECC 604 systems, but I would like to know pratically when EHP6 should be available.
I would like to avoid to have the EHP6 in GA while I'm in the middle of the EHP5 upgrade of some system......obviously if the EHP6 is available we have to upgrade to EHP6 instead of EHP5.
Anyone know when it's going to be released ?
Regards

Dear Roberto,
The EhP6 for SAP ERP 6.0 is currently in Ramp-Up phase, and the completition of this Ramp-Up phase is planned for the second quarter of 2012.
Therefore, the General Availability of EhP6 could be between May and June 2012. Anyhow, this GA date is not fixed and it is subject to change depending on how the Ramp-Up phase is going.
I would recommend you to check the Product Availability Matrix (http://service.sap.com/pam); once that the release date for EhP6 is published you will be able to see it here:
[http://service.sap.com/pam|http://service.sap.com/pam|Link to the Product Availability Matrix] --> in the Search box write EhP6 and click the "Search in PAM" button
There you will find the date when the EhP6 will be released.
Best regards,
Manuel Suarez.

EHP4 FOR SAP ERP 6.0 / NW7.01

I am new to SAP and have successfully Installed SAP ERP 6.0/NW 7.01 on Windows Server 2008 R2 with Oracle 10g. We would like to go ahead and apply the enhancements Package 4 to ERP 6.0 (SAP Enh. Package 4 for SAP ERP 6.0 1). I have no knowledge on how to install Enhancement packages.
Can someone please guide me on what is needed. What program or utility I can use to apply the EHP4. Any tips or direction would be would be nice.

Hi Amirsd,
You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
It would run in 7 phases including downtime phase.
Let me know if you have any queries. !!!!
Regards,
Shobhit Garg

CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

Hello,
What are the compatibility issues for EHP4 FOR SAP ERP 6.0 Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
Following are the System Details:
Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
Component: SAP_APPL
Release: 604
Support Pack: SAPKH60402
Level: 0002
Existing CRM 5.0
Component: BBPCRM
Release: 500
Support Pack: SAPKU50006
Level: 0006
Thanks,
AG
Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

Hi Amirsd,
You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
It would run in 7 phases including downtime phase.
Let me know if you have any queries. !!!!
Regards,
Shobhit Garg

EHP4 for SAP ERP 6.0

Hello,
I am installing Enhancement Package 4 for SAP ERP 6.0 (Windows Server 2003 x64/Oracle) using EHPinstaller tool.
SAP ERP 6.0 is an existing system. When I started the EHPi tool, I got to know that there are 8 stages in the installation roadmap.
If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
I havent even entered the 'resource utilization strategy' yet, which is taken as a parameter in the 3rd stage of CONFIGURATION.
I have already done the PREPARATION steps in installation guide, but am unable to find the reason behind such a long running stage.
Also, on checking EHPi logs, no error is logged as yet.
Please let me know the how long should I wait before stopping/terminating the installation?
Regards,
Saurabh.

> If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
This depends HEAVILY on your system speed. I have made EHP4 installations taking 2 days to 7 days.
24h for the extraction is very much, there seems to be a problem. I'd check the latest logs in EHPI\abap\log for possible issues. The extraction usually does nothing more than extracting all the SAR files to the correct places. This shouldn't take 24 h.
BTW: there's a special forum for EHP installations: /community [original link is broken]
Markus

Connecting SAP Crystal Report with EHP6 FOR SAP ERP 6.0

Hello Everyone!
I have downloaded SAP Crystal Report demo 30 days and we have an IDES for "EHP6 FOR SAP ERP 6.0", how can I make some reports and train myself with crystal report?
I don't understand how to make the connection to our SAP DB, can you help me?
Thank you!
Denis

Ok solved.
- I assure where is the saplogon.ini (in my case: %appdata%\SAP\Common\saplogon.ini)
- I open the saplogon.ini with notepad and set the UTF format and than save it replacing the original one if it was not in UTF format
- I go to : control panel>system>advanced>environment variables>system variables and I create a new one with name "SAPLOGON_INI_FILE" and path "C:\Users\....\AppData\Roaming\SAP\Common\saplogon.ini";
- Open SAP Crystal Reports 2013 (in my case) > VIEW > Preferred Viewing Locale > (here I set the language of the SAP System I am going to log on with crystal report, in my case was in english so I set English)
- (within SAP Crystal Reports 2013) > FILE > Log On or Off Server... > Create New Connection > SAP Table, Cluster, or Function > (now it shows me all the different SAP Systems that are also in the SAP GUI Logon, choose one, set the client-username-password and then finish)
Thank you,
Closed.

E-commerce 5.0 for SAP ERP 6.0 ehp3: detailed description of product

Hello community,
I have installed and customized B2C shop (version 5.0) for SAP ERP 6.0 (NO TREX, NO IPC).
At first i maintained my shop with english language and after i checked out that all work properly i decided to localize it for russian language.
I created new shop for russian language and faced the following problem: list of products in my shop displays correctly but when i want to check detailed description of product (click on product in list) i see something like this &#1053 &#1086 &#1091 &#1090 &#1073 &#1091 &#1082 instead of description on russian.
Can somebody help me to sort out this issue?
Thanks in advance.
BR,
Dzmitry

HI,
I can obtain detailed description of product on russian after i installed SAP E-commerce for SAP ERP version 7.0 instead of version 5.0.
Br,
Dzmitry

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

Hi,
Login to http://service.sap.com/swdc using your S user-id
Serach for kernel
Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
Regards,
Rajneesh

Hardware requirements for SAP ERP 2005 using ECC 6.0

Hello everyone,
i am already new and need information about the min. hardware requirements for a SAP ERP 2k5 System using ECC 6.0 with IDES 7.10.
I read the Master Guides about ERP, but i am not even more clever than before.
The OS is MS Windows 2k3 Server EE.
The last information i had from another one to this configuration is:
1 dual-core cpu (? Ghz)
4-6 GB RAM
300 GB HDD
Does it fit? Can anyone help me out?
Thanks in advance.
Message was edited by:
        Marcel Jahn
Message was edited by:
        Marcel Jahn

Hi,
IDES 7.10?!?
If it's an IDES system you want to set up, HDD space may be the bottleneck. It's sufficient for installation, but you may run out of disk space since note <a href="https://service.sap.com/sap/support/notes/1013391">1013391</a> states
Hardware Requirement
                 MS-SQL ORACLE   MaxDB   DB2 Win/Unix AS/400
DB size (GB):    160     220      220          160       280
Since IDES is for education and training purposes only the rest should be sufficient.
I'm running an ERP 6.0 IDES system (32 bit) on a single core, 3.2 GHz, 4 GB RAM, 250 GB System and 500 GB SAP/DB HDD with pretty good response time.
Peter
Points always appreciated

Technical Usage for SAP ERP 6.0 EhP4

Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2     XSS     XSS     Self Services
SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
SAP ERP 2005/SR2     BD     BD     Biller Direct
SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
SAP ERP 2005/SR2     ECC     ECC     Central Component
SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha Cha

Hello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ

Demo for SAP ERP 6.0 EhP 3.0 BAIO with 2 clients

Similar Messages

Maybe you are looking for