Demo License for 10.5?

I've upgraded from 8.6 to 10.5 and was hoping to use a demo license while waiting for the 10.5 NFR to become available. There is a file on the disc called 100_pre_demo.lic, but when trying to use this, it gives a lot of errors about invalid MAC addresses. Is there a demo license available for 10.5?

Hi Gergely,
I was running 8.6 on a marketplace NFR license - this a is a lab demo system. I upgraded to 10.5 and I see that the 10.5 NFR license pack isn't available for a few weeks, so was trying to use the demo license included on the disc, but says "Invalid Mac Address: FFFFFFFFFFFF" for each of the licensed features:
"Error : The Cisco Unified CCX Premium Software feature (1st line) of ccx100_pre_demo.lic has invalid MAC address [FFFFFFFFFFFF]."
I have reached out to licensing to see if they can give me a temporary license.

Similar Messages

Demo license for the Adobe PDF library

Hi,
Does anyone knows how to get the demo license for the adobe PDF library?? I just need to test the API calls to see whether they suite my needs or not.. Kindly help me in this regard... Any other way would also be welcomed.. thanks..
Deepak

The Adobe PDF Libarary is mainly licensed through DataLogics
(http://www.datalogics.com/)
So contact them directly to find out if a demo license is available,
and what the eventual licensing terms would be.
Aandi Inston

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

Demo license for UCCX

Hey avery body
I want to get a demo license for uccx, How I can do ??
Best Regards

Demo licenses are included in the DVD or ISO of UCCX. You can find them in the \DemoLicense\ folder. There are four demo licenses. STD, ENH, PRE, and IPIVR.
If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00

Demo License for Virtual Image of Web Security

Hello,
I had downloaded the latest image for Virtual WSA.
But I am not able to get the demo license for that.
It is showing the message "Access to the page resitricted."
Thank you -- and you helpp will be appriciated..
regards
Hozefa

Hello,
You should have privileges as long as you are logging into the site using your CCO ID. If you do not have one please register for a CCO ID on www.cisco.com and you should have access to get a demo license. If you are logging in with your CCO ID and its still giving you the error message then you will need to reach out to your Cisco Account manager to provide the demo license. I apologize for any inconvenience this causes.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091

Demo license for the any connect mobilee

Hello Team,
Actually we want to do the testing to connect mobile device to our organisation (for jabber) .
That required any connect license in ASA ,is there any option we can get the Demo license for the any connect Mobile
Thanks in Advance

Cisco does not offer a demo license for AnyConnect for Mobile. The activation key for that license is not time limited and nothing would prevent you from installing it and then using it forever in production.
That said, it's not very costly to purchase - no more than a couple hundred US$, depending on your ASA model.

Can I use ISE demo license for wireless purposes???

Hi all.
We want to try an ISE deployment with one or two WLC and the license twe want to use initially is the demo embedded in the ISE appliance. We don't know whether we can do it because demo license covers base and advanced capabilities but not wireless (at least in administration/licensing this box shows "not installed" leyend) and we don't know whether a demo tape of wireless solution will work with this type of licensing; if not, is it possible to get a demo wireless license for ISE?
Thanks.
Best Regards.

The evaluation license does cover the wireless. Its actaully a full license.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

CUCM 10.x Demo licenses

Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

Adanced Malware Protection AMP - Demo license ESA C170

My customer has an ESA C170 appliance in production and he wants to try the AMP funcionality.
How can I get an Adavanced Malware Protection AMP demo license for the Email security Appliance C170.
Thanks in advanced
Diego Prada

You will need to get the following feature key applied from GLO, avail in 1Y, 3Y, and 5Y...
GLO should also be able to provide a 30-day temp/trial key, if requested.
You will need to reach out to GLO and request the demo license/feature key to be added to the serial, if hardware - or to the virtual license number (VLN) if a virtual appliance.
Global Licensing Operations (GLO):
https://tools.cisco.com/SWIFT/LicensingUI/Home
Licensing FAQ
Phone: 1-800-553-2447, opt 3
Request to have a case opened for GLO/Licensing.
Their email directly is: [email protected]
-Robert

Expressway-e demo license

Guys,
I am trying to run MRA in my lab and I am wondering how I can get a demo license for expressway-e and c demo licenses for the lab. Any ideas?

Dear Patrick,
is Demo licensing will work for calls outside the domain or organization. I mean if anyone have demo license for Expressway-C and E. is that work for B2B calls or B2C calls for limited period of time or it will be only within a domain ?
Thank you and Ragrads,
Umer Javed

CUCM demo license question

Hello.
We use two nodes of CUCM 7.1 and we have permanent device license. Now we'd like to increase amount of phones for a short time. I downloaded 3-monthes demo license for 500 units (the file in attachment). So my question is - how I should add this license correctly? Should I edit this file in some way before uplouding to a server? What will be with our permanent license? What will happen after 3 months? We just lose additional 500 units or it could affect the permanent license?
I would very thankful for any answers.
Ruslan

Ruslan,
All licenses on CUCM are cumulative and they do not overwrite previous licenses. So, simply upload this licenses (assuming it is for the correct MAC) on the publisher. There is no limit as to how many licenses you can have AFAIK.
HTH,
Chris

Demo License

Hi Friends,
I have Downloaded and installed a demo version of Sun Forte in my V880 System.Now i require the license for it to use.Accdng to Sun they say tat during downloading there is a option from where we cud get the demo license for 1mth.I am downloading tat license but it shows tat the Demo license validity is till 6th Feb 2005 which is already gone..
Can anyone help me in getting the Demo license for a month..
Regards,
Murtaza

If this is the shipping version of the product (not an Early Access build), then the installer should have generated a license good for 60 days from the install date. If you post the output of
snit
I can take a look and see what the problem might be...
--Terry.

DEMO LICENSE IN UCCX 10.0

Hi,
I tried to use Demo License for UCCX 10.0 which is in installtion Disk but I got the following error:
"The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue."
It's extrange the license names in installation disk are (don't ask me why):
ccx90_enh_demo.lic
ccx90_ivr_demo.lic
ccx90_pre_demo.lic
ccx90_std_demo.lic
I' m running UCCX 10.0.0.95. I already tried to upload Enh and Pre license file. I already removed the license, restarted the server and tried the wizard process again but it didn;t work. I read this post too: https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
Any help would be appreciated.
Regards

Can you get your hands on 10.0.1.10000.24 or later (SU1 is out now I believe as of 2 or 3 weeks ago)..because pre_demo is supposed to be in the same directory.

Demo License on BE3000

Hi all
Kindly need your help. I'm gonna deploy BE3000 with 6921-CBE-K9 handset. The problem is my 6921-CBE-K9 will be late on arrival.
I have 6921-C-K9 and I know that phone is not bundled with license.
The Question is how many license I can get if I use demo license for BE3000? Because I need to deploy 50 endpoint using 6921-C-K9 with BE3000 as a call manager. Is it enough?
As I know, when we request demo license for CUCM 8x it will be give about 300-500 license (CMIIW) and it should be support for about more than 100 endpoint using 6921.
Best Regards,
Nanda Nurhadyan

I've been trying today to install my demo license that I request from
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=9036
But The result message is :
The File Upload failed for CUCMBE3KEVAL201303220302187100.lic because of a system error.
The Question is :
Can I install this demo license without connected to internet. Or it must be connected to internet ?
Best Regards,
Nanda Nurhadyan

CUCM 9.1.2 - add demo licenses to existing

Hi guys,
Does anybody know what will happen if I add demo licenses for CUCM 9.1.2 in addition to existing permanent licenses? Is it possible and working solution? The goal is to extend the number of existing licenses for short period of time until additional permanent licenses will be purchased.
Thanks!
Kind regards,
Andrew C.

Hi Andrew,
I doubt you can do it again since you have already exceeded the 60 days period.
Try deleting them for Call manager and add them, re-synchronise , if it helps .
you can refer the link
https://supportforums.cisco.com/message/4152401#4152401
regds,
aman

Demo License for 10.5?

Similar Messages

Maybe you are looking for