Demo license in CUCM 9.1

Does anybody knows in a CUCM 9.1 with a demo license, how many devices i can install? in cucm 8.X for example in system > licenses i can see how many DLUs i have and how many devices can install, in cucm as work with CUWL does not show anything, all is 0 as show
In ELM i can not see anything.
Thanks!

You can get a six month demo license at cisco.com/go/license with the following licensing:
Cisco Unified Communications Demo License Version 9.x
- 20 CUWL PRO Unified Communications Manager licenses
- 20 CUWL PRO Unity Connection licenses
- 5 TelePresence Room licensesPlease note: The term for this demo license is 6 months

Similar Messages

CUCM 10.x Demo licenses

Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

CUCM 9.1.2 - add demo licenses to existing

Hi guys,
Does anybody know what will happen if I add demo licenses for CUCM 9.1.2 in addition to existing permanent licenses? Is it possible and working solution? The goal is to extend the number of existing licenses for short period of time until additional permanent licenses will be purchased.
Thanks!
Kind regards,
Andrew C.

Hi Andrew,
I doubt you can do it again since you have already exceeded the 60 days period.
Try deleting them for Call manager and add them, re-synchronise , if it helps .
you can refer the link
https://supportforums.cisco.com/message/4152401#4152401
regds,
aman

Demo License on BE3000

Hi all
Kindly need your help. I'm gonna deploy BE3000 with 6921-CBE-K9 handset. The problem is my 6921-CBE-K9 will be late on arrival.
I have 6921-C-K9 and I know that phone is not bundled with license.
The Question is how many license I can get if I use demo license for BE3000? Because I need to deploy 50 endpoint using 6921-C-K9 with BE3000 as a call manager. Is it enough?
As I know, when we request demo license for CUCM 8x it will be give about 300-500 license (CMIIW) and it should be support for about more than 100 endpoint using 6921.
Best Regards,
Nanda Nurhadyan

I've been trying today to install my demo license that I request from
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=9036
But The result message is :
The File Upload failed for CUCMBE3KEVAL201303220302187100.lic because of a system error.
The Question is :
Can I install this demo license without connected to internet. Or it must be connected to internet ?
Best Regards,
Nanda Nurhadyan

CUCM Licensing/ordering and demo licenses

Hello,
I am trying to setup a lab with CUCM and trying to figure out the process to place an order for CUCM. I know that you need DLU licneses for each phone, however do I need to buy a base license in addition to that? How does it work?
Also, does CUCM come with a demo license which I can use for my lab without ordering any additional licenses??
What are my options?
I alos tried to search the part/product numbers for CUCM ordering but was not able to find them on Cisco site. I am interested in buying CUCM 7.x.
Thank you.

Hi there,
The Part# you would be looking for is;
CM7.1-K9-LAB
SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only
This comes with licensing for 2 Nodes, Software (DVD's) and 100 DLU's which
is good for approx. 20 phones I believe the End of Sale for this is June of this year.
Cheers!
Rob
"Everything is broken" - Bob Dylan

CUCM demo license question

Hello.
We use two nodes of CUCM 7.1 and we have permanent device license. Now we'd like to increase amount of phones for a short time. I downloaded 3-monthes demo license for 500 units (the file in attachment). So my question is - how I should add this license correctly? Should I edit this file in some way before uplouding to a server? What will be with our permanent license? What will happen after 3 months? We just lose additional 500 units or it could affect the permanent license?
I would very thankful for any answers.
Ruslan

Ruslan,
All licenses on CUCM are cumulative and they do not overwrite previous licenses. So, simply upload this licenses (assuming it is for the correct MAC) on the publisher. There is no limit as to how many licenses you can have AFAIK.
HTH,
Chris

CUCM Demo License Renewal

   i believe my demo license may have expired. i can access all the cucm node servers in the cluster but not the activity buttons within each service(admin,serviceability,etc) . i get this msg on the admin page:
Licensing Warnings:
System is operating on Demo licenses. Please upload relevant license files
what's the process/steps to renew the demo license?

Its called buy licensing at this point.   The demo license does not run more than 1 or two nodes. So not sure how many nodes you have or trying to activate. Usually you can only activate a single node (Publisher) on the Demo license in 8.6

CUCM Demo License

Hello,
I running CUCM with demo license is there a time limit to use this demo licenses?
Regards
Leonardo Santana

This is no longer true starting with ELM on CUCM 9.0. There are no licenses installed by default and ELM will shutdown the products after a grace period.
A 60 day grace period allows administrators to add users even if insufficient licenses exist within the ELM license pool. If sufficient licenses are not available once the 60 day grace period expires, then the Unified Communications application(s) will no longer allow any further changes; however, the application(s) will continue to function with no loss of service.
Unity Connection will outright halt services when the grace period expires.
Your only path for a permanent lab/demo would be to purchase an NFR kit.
Please remember to rate helpful responses and identify helpful or correct answers.

CUCM 7 - Activate Demo Licenses

Hi all,
I got a CUCM Demo version from my compnay for trial before implementing CUCM 7 company wide.
As I installed the application I had no problems, however, when I try now to access the GUI / Devices / Phones and add a phone I get this error msg :
Add failed: [4935] allocated licenses consumed by used and pending. Please u[pload additional licenses and try again
How can I activate the Demo license so I can add a Phone for trial purpose?
Not sure if that is in regards to this, but if I try to start Cisco Call Manager the below error appears (Picture)
As you can see from the Picture I have 150 licenses, but what am I doing wrong?
Thanks,
Chris

Hello,
As per the previous recommendation you should be able to restart 'License Manager' service under Network Services in Servicability. That should help clear the issue. If that does not help, you could open a case with Licensing and they can generate 'temporary licenses' which expire after a certain time period.
Hope this helps!
Vajrender

Cisco UCCX 9.0.2.10000-71 - Demo License Issues

Hello Cisco Support,
I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2.
I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
Below is the information for my setup:
admin:show uccx version
Active UCCX Version: 9.0.2.10000-71
Inactive UCCX Version: NA
admin:show uccx license
Configured Licenses:
Package: Cisco Unified CCX Premium
IVR Port(s): 50
Cisco Unified CCX Premium Seat(s): 25
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Quality Manager Seat(s): 25
Cisco Unified CCX Advanced Quality Manager Seat(s): 25
Cisco Unified CCX Workforce Manager Seat(s): 25
Cisco Unified CCX Compliance Recording Seat(s): 50
Cisco Unified CCX Maximum Agents: 400
Cisco Unified CCX Licensed Outbound IVR Port(s): 25
For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
Command successful.
Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
Warm regards,
JK.

Hello Aman,
Thanks for the link.
How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
Warm regards,
JK.

In-house test and demo license

Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
Here is the information for Test&Demo license:
IDES Test & Demo License
It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

Hello Veeren,
Hope this helps:
Q. How to obtain access ?
Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
Q. How long does this process take ?
In our case, it was less than a week.
Q. What's the cost ?
We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
Q. How well does the system work ?
The system was quite fast and the access is via ITS / SAP GUI for HTML.
Q. Do you get access to only the built-in data or you can create your own ?
Besides the XI Server, it was an IDES system in our case and we were also able to create data.
All the best for your certification.
Regards,
Parag.

Problem with Demo License

Hi,
I install the version 6 update 2 on my Solaris 7 sparc, with the demo license. But when I try to use cc I got this error
License Error : Licensing product (Sun WorkShop Compiler C SPARC).
License File:
/opt/SUNWspro/bin/../WS6U2/bin/../../license_dir/sunpro.lic,node
License file does not support this version
Feature:workshop.c.sparc
Application version > License version:6.000000 > 5.000
FLEXlm error:-21,126.
Any idea?
Thanks

HI,
Please check and make sure your license file
"sunpro.lic,node" is indeed having the demo
license Forte 6 Update 2.
It appears from these errors that this may not be
the case.
Hope this helps.
Thanks,
Gopinath.

Unable to Migrate WCS Database to NCS with Demo License

I have NCS 1.1.0.58 running on a VM with a demo license, should I be able to migrate my WCS 7.0.230.0 database to NCS? I can not tell if the migration process worked and there are no objects in NCS. I have attached a console capture of the migration console messages.
Thanks in advance,
Bob

You have probably thought of this already but, If the tables are the same in both sides why don't you just work out the population order and export directly from Access into the empty oracle tables using ODBC?
The way I do it is to create transition tables in oracle then have a script to load the tables and do some validation and error checking.

UCCX 10.6.1 - Expired, Auto-generated Demo license crashing MCVD-LIB_LICENSE startup process?

Anybody else experiencing this?
I upgraded from version 9.0.x to 10.6.1 at the end of December. It generated a Demo License (that wasn't needed) during the upgrade, which expired on Feb 27th.
I restarted the engine on the HA node last night, and it won't start up now.
On start-up, MCVD Log shows:
6953: Mar 09 10:55:03.978 EDT %MCVD-LIB_LICENSE-7-UNK:General Runtime Error in using m_FlexlmParser details are : Exception=java.lang.NullPointerException
The process stops reading/parsing licenses after this and acts like it would if it had no license.
Good thing this wasn't my primary engine.

Yes,
That's what I ended up having to resort to. I had numerous demo licenses across the years because of rapid expansion of call volume (agent seat temp licenses to act as a bridge gap while permanent licenses were purchased and delivered).
It ended up being caused by two demo licenses that expired on the same day, it seems.
Just to add to your answer though... DO NOT DELETE THEM FROM THE GUI. This will put your engines out of service until all offending files are deleted, and may require a reboot even then.
Thanks...

UCCX 9.x - Problem to upload DEMO License on vmware install

Hi Guys,
I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
Enter a license or zip file name
License File*
Validating uploaded license file...
Warning: No valid license feature lines found in the uploaded license(s).
Validation completed.
The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
The demo license was download from Cisco, and I used the license MAC to generate the license.
Any have Idea about this issues? Where stay the config repository?
Thanks,
Wilson

Hi Anthony,
Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
Thanks,
Wilson

Demo license in CUCM 9.1

Similar Messages

Maybe you are looking for