DEMO LICENSE IN UCCX 10.0

Hi,
I tried to use Demo License for UCCX 10.0 which is in installtion Disk but I got the following error:
"The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue."
It's extrange the license names in installation disk are (don't ask me why):
ccx90_enh_demo.lic
ccx90_ivr_demo.lic
ccx90_pre_demo.lic
ccx90_std_demo.lic
I' m running UCCX 10.0.0.95. I already tried to upload Enh and Pre license file. I already removed the license, restarted the server and tried the wizard process again but it didn;t work. I read this post too: https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
Any help would be appreciated.
Regards

Can you get your hands on 10.0.1.10000.24 or later (SU1 is out now I believe as of 2 or 3 weeks ago)..because pre_demo is supposed to be in the same directory.

Similar Messages

  • Demo license for UCCX

    Hey avery body
    I want to get a demo license for uccx, How I can do ??
    Best Regards

    Demo licenses are included in the DVD or ISO of UCCX.  You can find them in the \DemoLicense\ folder.  There are four demo licenses.  STD, ENH, PRE, and IPIVR.
    If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00

  • Cisco UCCX 9.0.2.10000-71 - Demo License Issues

    Hello Cisco Support,
    I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2. 
    I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
    I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
    When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
    I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
    Below is the information for my setup:
    admin:show uccx version 
     Active UCCX Version: 9.0.2.10000-71
     Inactive UCCX Version: NA
    admin:show uccx license
    Configured Licenses:
    Package: Cisco Unified CCX Premium
    IVR Port(s): 50
    Cisco Unified CCX Premium Seat(s): 25
    High Availability : Enabled
    Cisco Unified CCX Preview Outbound Dialer: Enabled
    Cisco Unified CCX Quality Manager Seat(s): 25
    Cisco Unified CCX Advanced Quality Manager Seat(s): 25
    Cisco Unified CCX Workforce Manager Seat(s): 25
    Cisco Unified CCX Compliance Recording Seat(s): 50
    Cisco Unified CCX Maximum Agents: 400
    Cisco Unified CCX Licensed Outbound IVR Port(s): 25
    For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
     Command successful.
    Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
    Warm regards,
    JK.

    Hello Aman,
    Thanks for the link.
    How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
    Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
    I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
    Warm regards,
    JK.

  • UCCX 9.x - Problem to upload DEMO License on vmware install

    Hi Guys,
    I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
    Enter a license or zip file name
    License File*
    Validating uploaded license file... 
    Warning: No valid license feature lines found in the uploaded license(s).
    Validation completed.
    The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
    The demo license was download from Cisco, and I used the license MAC to generate the license.
    Any have Idea about this issues? Where stay the config repository?
    Thanks,
    Wilson

    Hi Anthony,
    Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
    https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
    I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
    Thanks,
    Wilson

  • Uccx demo license disappears after reboot

    hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to reupload the demo license, it generates an error. can anyone help me with this?
    thanks in advance.

    What is the exact UCCX version?
    If possible, share snapshot of error message.
    regds,
    aman

  • UCCX 8.51 demo license install issue

    I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
    Thanks,

    Hi,
    License will come into picture when you are performing the UCCX initial app admin setup.
    I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
    http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
    Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
    Thanks,
    Anand

  • UCCX 10.6.1 - Expired, Auto-generated Demo license crashing MCVD-LIB_LICENSE startup process?

    Anybody else experiencing this?
    I upgraded from version 9.0.x to 10.6.1 at the end of December.  It generated a Demo License (that wasn't needed) during the upgrade, which expired on Feb 27th.
    I restarted the engine on the HA node last night, and it won't start up now.
    On start-up, MCVD Log shows: 
    6953: Mar 09 10:55:03.978 EDT %MCVD-LIB_LICENSE-7-UNK:General Runtime Error in using m_FlexlmParser details are : Exception=java.lang.NullPointerException
    The process stops reading/parsing licenses after this and acts like it would if it had no license.
    Good thing this wasn't my primary engine.

    Yes,
    That's what I ended up having to resort to.  I had numerous demo licenses across the years because of rapid expansion of call volume (agent seat temp licenses to act as a bridge gap while permanent licenses were purchased and delivered).
    It ended up being caused by two demo licenses that expired on the same day, it seems.
    Just to add to your answer though... DO NOT DELETE THEM FROM THE GUI.  This will put your engines out of service until all offending files are deleted, and may require a reboot even then.
    Thanks...

  • UCCX 8.5 Demo License File

    Hi,
    Can anyone direct me to link where i can get Contact Center Express 8.5 Demo License File?
    Thanks.

    Hi
    There is a DemoLicense folder on the DVD or ISO image, this contains four license files to demo the different editions available - std, prem, enh, ipivr...
    Regards
    Aaron
    Please rate helpful posts..

  • Demo License UCCX 8.5(1)

    Is there a demo license on the disc?  Can someone upload it possibly?
    Chad

    Got a question.
    I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
    Any help is always appreciated.
    Sent from Cisco Technical Support iPhone App

  • Medisense license for UCCX

    Good day! I need to order 5 UCCX Premium license. I ordered CCX 10 Premium 5 seat Promo Bundle inside R-UCL-UCM-LIC-K9. Now I need to add 5 audio license for these Premium license. According to Ordering guide I need to order only MCP-10X-AUD-10PACK inside CCX-10-LIC-K9.  But I faced issues when I tried to order MCP-10X-AUD-10PACK - I got a message "A selection of CCX-10-N-P-LIC is required when Premium License is selected. Please adjust the selections. (CE200381)" in spite of ordered CCX 10 Premium 5 seat Promo Bundle. I attached my issue below. Do I need to order something else or is MCP-10X-AUD-10PACK enough for audio recording of operators in my case.

    Demo licenses are included in the DVD or ISO of UCCX.  You can find them in the \DemoLicense\ folder.  There are four demo licenses.  STD, ENH, PRE, and IPIVR.
    If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00

  • In-house test and demo license

    Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
    Here is the information for Test&Demo license:
    IDES Test & Demo License
    It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
    Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
    Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
    How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

    Hello Veeren,
    Hope this helps:
    Q. How to obtain access ?
    Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
    Q. How long does this process take ?
    In our case, it was less than a week.
    Q. What's the cost ?
    We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
    Q. How well does the system work ?
    The system was quite fast and the access is via ITS / SAP GUI for HTML.
    Q. Do you get access to only the built-in data or you can create your own ?
    Besides the XI Server, it was an IDES system in our case and we were also able to create data.
    All the best for your certification.
    Regards,
    Parag.

  • Problem with Demo License

    Hi,
    I install the version 6 update 2 on my Solaris 7 sparc, with the demo license. But when I try to use cc I got this error
    License Error : Licensing product (Sun WorkShop Compiler C SPARC).
    License File:
    /opt/SUNWspro/bin/../WS6U2/bin/../../license_dir/sunpro.lic,node
    License file does not support this version
    Feature:workshop.c.sparc
    Application version > License version:6.000000 > 5.000
    FLEXlm error:-21,126.
    Any idea?
    Thanks

    HI,
    Please check and make sure your license file
    "sunpro.lic,node" is indeed having the demo
    license Forte 6 Update 2.
    It appears from these errors that this may not be
    the case.
    Hope this helps.
    Thanks,
    Gopinath.

  • CUCM 10.x Demo licenses

    Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
    Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

    We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

  • Unable to Migrate WCS Database to NCS with Demo License

    I have NCS 1.1.0.58 running on a VM with a demo license, should I be able to migrate my WCS 7.0.230.0 database to NCS?  I can not tell if the  migration process worked and there are no objects in NCS.  I have attached a console capture of the migration console messages.
    Thanks in advance,
    Bob

    You have probably thought of this already but, If the tables are the same in both sides why don't you just work out the population order and export directly from Access into the empty oracle tables using ODBC?
    The way I do it is to create transition tables in oracle then have a script to load the tables and do some validation and error checking.

  • AnyConnect for Cisco VPN Phone demo license

    I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 150
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled
    VPN-3DES-AES                   : Enabled
    Security Contexts              : 2
    GTP/GPRS                       : Disabled
    SSL VPN Peers                  : 2
    Total VPN Peers                : 750
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled
    AnyConnect for Cisco VPN Phone : Disabled
    AnyConnect Essentials          : Disabled
    Advanced Endpoint Assessment   : Disabled
    UC Phone Proxy Sessions        : 2
    Total UC Proxy Sessions        : 2
    Botnet Traffic Filter          : Disabled
    This platform has an ASA 5520 VPN Plus license.

    Hi there,
    Did you try
    https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
    Cheers!
    Rob
    "Why not help one another on the way" - Bob Marley

Maybe you are looking for