Demo License key issue in Cisco Content Secuirty managment Virtual appliance

Hi,
I have installed a Cisco content security management appliance for customer evaluation. I have downloaded 45 day demo license key but unable to update the license key neither in GUI nor in CLI. I have referred installation guide and user guide but did not helped at all.
Snapshot from GUI

Would suggest to re-copy and paste the XML license - as most likely you have extra white space that is causing the malform when pasting/loading. If using Windows, try avoid using wordpad --- and use Notepad++ or similar.
http://www.cisco.com/c/en/us/support/docs/security/email-security-virtual-appliance/118301-technote-esa-00.html
-Robert

Similar Messages

SAP B1 8.81 Customer Demo License Key Request Link

Hello ,
Could you please specify the link and steps to request a temporary Customer Demo License Key in SAP B1 8.81 ?
Thanks
Dinesh

hi,
pls follow the ff steps.
1. Get your Machine Hardware Key
2. Contact your SAP Partner to Request a temporary License key
alternatively you can visit this link but you need S-Account to access this page
https://websmp208.sap-ag.de/smb/sbocustomer
regards,
Fidel

How to request demo license key?

Dear experts,
My company have 20 demo license keys. Unfortunately, when I make a request license key, it not appeared in License Details. Can I requested for that type of key?
Thanks.
Edited by: Nguyen Ngoc Tam on Oct 8, 2010 11:25 AM

Hi.......
You should have permanent license. Why requesting for License again and again?
Anyways, You can check out the license history. you find each and every license with date when and for whom you requested license..........
Regards,
Rahul

Regarding Demo License Key download - Project critical

I have got an S User ID & would like to download a Demo license key. However, when I log into my S User license & go to request License Key, it does not show me the link for download. Would appreciate help on this.

Rahul,
You have to be a Super Administrator in order to request a license. Please read this NOTE
https://service.sap.com/sap/support/notes/492385
Best wishes
Suda

UCCX 8.51 demo license install issue

I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
Thanks,

Hi,
License will come into picture when you are performing the UCCX initial app admin setup.
I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
Thanks,
Anand

Acrobat 9 Pro license key issue.

Why won't my Acrobat 9 Pro license key work on the install onto my new computer?

I have two days left on my "Trial version". From what I've read in the forums, reinstalling from a link has fixed this issue with other users. Can you send me one? (This is driving me crazier than normal)
Kerry
Frustrated and running out of patience . . . . .

CAF License Key issue solved

Hi,
Some questions in this forum relate to the CAF license key. (This key is needed if you'd like to work with the CAS perspective in the NetWeaver Developer Studio.)
This issue is now solved: use the newest SneakPreview NetWeaver NW04s, SP7, then no license key is needed for designing CAF projects.
Here the corresponding <a href="/people/jan.rauscher/blog/2006/05/11/caf-license-key">CAF license key web log</a>
Regards,
Jan

Hi Suresh,
Do you have an addon with a special character in the name?
Regards
Ad

B2B Document Editor License Key Issue

Hi,
I have downloaded Oracle B2B Document Editor from OTN and installed the same without any error but while trying to use it to generate B2B guideline files (ecs and xsd files), at the very first step we are getting the error saying -
*"This feature is not available with the current type of license. Please contact [email protected] to obtain an upgraded license key."*
As a result, it is not allowing further to create the guideline files i.e. we cannot use the software.
Have anybody faced this issue? Any idea about is it expected or why this is coming or how to get rid of this?
Note: Buying a license is not an option for me as I just want to evaluate the software.
Download link I have used: http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Thanks
Satyaki

Satyaki,
But as I understand installing b2b doc editor does not have any dependency with SOA installation as such and it can be installed at any Standard Windows machine with no SOA in it. So, has this concept changed in case of this latest version? Should the latest doc editor version can be installed only where soa is installed? Your understanding is correct. B2B Doc Editor is independent of SOA and that patch should be applied into SOA environment(SOA Suite 11g R1 (11.1.1.5.0)) release to use complete health care features in SOA which are already available in Doc Editor 11.1.1.5.0
Moreover, will the guideline files generated using this doc editor NOT work if used with soa suite version 11.1.1.3? You are not supposed to use B2B Doc Editor 11.1.1.5.0 version with SOA Suite 11.1.1.3.0
I will personally suggest you to use SOA 11.1.1.4.0 and B2B Doc editor 11.1.1.4.0 if you are working on any evaluation.
Regards,
Anuj

Updating license key issue

I am attempting to move the SAP B1 application to a different server (pointing to the same database server).
In doing so I have been told I needed to request a new license key. I have done that however when I try to import the license key into the SAP B1 client (from the Administration->License->License Administration program) I get the following error:
wrong license file; hardware key does not match.
I retrieved the hardware key from the SAP B1 Server Suite Manager that is running on this new application server (from the Settings on the License Manager service).
Also, the License Server that appears on the License Administration dialog still points to the original server. I have tried typing in the new server's name but cannot.
By the way I am trying to make this change in the QA enviornment. We are running a W2003 server and serving the SAP B1 client up via citrix. SAP B1 client and server are installed on the same server.
Any suggesitons would be helpful.
Thanks,
Mike
Edited by: Mike Hamm on Sep 29, 2009 1:45 AM

Hi Mike,
>
Mike Hamm wrote:
> How would I check the port? Is that something on the server or in SAP B1?
Both. In the SAP Business One License Manager ->Settings -> Connection details you might like to change the default port number 30000. In order to check your firewall on the server refer to the documentation of the used firewall.
>
Mike Hamm wrote:
> I do not get any error message when I change the server on the License Administration dialog is: "License server changes will take effect at next logon to a company". Unfortunately the server name reverts back to the original server name (which is, by the way, still operational--does that make a difference?)
You can have running the license server on another Server than the one on which SAP Business One Server application is installed. However it will revert back (to last known 'good' license server) as long no valid license file has been importet to the new license server.
>
Mike Hamm wrote:
> When I try to import the license key I received from SAP (after providing the hardware key from the license manager) I get the following error message: wrong license file; hardware key does not match.
Try to download the license file directly from the Webpage, sometimes the files get corrupted, if sent by email.
Further info: Note [776870|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=776870] and note [578256|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=578256]
Kind regards
Mario

License Key Issues

Hello Everyone--
The following is for my own personal computer. There has been so much going on that to save time, for both of us, I'll just list my situation in bullet point format and then ask the question
at the end.
* I bought a PC with an OEM copy of Windows XP
* I bought an upgrade to Windows 7
* The hard drive crashed
* I restored my Windows 7 backup to the new disk
* The registry got whacked
* I did a repair with a Windows 7 full version (not upgrade version) because my upgrade media was bad
* My license key won't work anymore -- spoke to Microsoft, 4 different phone transfers before they hung up on me--said the key was blocked
Q: If I buy a new full version of Windows 7, the same version I'm running now (W7 Pro 64-bit) will the new license key work on the current W7 I'm already running or is the key tied to the media?
I don't want to wipe my hard drive and install Windows XP and then Upgrade to W7 and have to go through all of the app installs again-- I would rather pay for a new license, but only if the
new key will work.
Merry Christmas!
and thanks,
Stephen Davis

Hi,
You should check your current Windows version first, just use WINVER command.
Update your Windows product key
http://windows.microsoft.com/en-IN/windows/help/genuine/product-key#T1=tab01
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

SCP issue in Cisco Prime LAN Management Solution 4.2.5

Hi guys,
I am trying to solve the following issue for the failed scheduled jog using SCP:
                           JOB ID - 7431 SUMMARY
Device Name : xxxxxxx
Software upgrade result - Failed
Total number of devices scheduled for upgrade : 1
Number of devices upgraded : 0
Number of devices failed : 1
Total time taken for Job - 3 Minutes 20 Seconds
Status of Job - FAILED
Starting Job: ID - 7431
Job Started At : Mon Dec 15 12:20:09 EST 2014
Job running on : xxxxxxxxx
Upgrade Mode : Parallel
Reboot Mode : Parallel
Protocol Order for Image Transfer : SCP
Protocol Order for Config-operations : SSH,TFTP,HTTPS,TELNET,SCP
Total number of device(s) to be processed : 1
Processing Device : xxxxxxx
Start Time : Mon Dec 15 12:21:20 EST 2014
Device is locked for exclusive access.
The supported protocols for image transfer are: SCP
Connecting to the device using SSH...
Connected successfully.
Retrieving configuration file from the device...
Current device config is copied to /var/adm/CSCOpx/files/rme/jobs/swim/7431/xxxxxxxx
Checking if HTTP server is enabled on the device...
Http Server is not enabled, will continue with Software Upgrade Operation.
Copying cat3k_caa-universalk9.SPA.03.03.05.SE.150-1.EZ5.bin from Software Repository to scp-specific directory.
Copied successfully to /tmp/rep_sw_9212002925209712419
Loading image file to flash device : rep_sw_9212002925209712419 --> flash:cat3k_caa-universalk9.SPA.03.03.05.SE.150-1.EZ5.bin using SCP
Image Copy Operation Failed
Device is unlocked.
Device Upgrade Result : Failed
End Time:Mon Dec 15 12:22:56 EST 2014
Job Ended At : Mon Dec 15 12:23:30 EST 2014
I noticed this post https://supportforums.cisco.com/discussion/11715076/lms-422-software-distribution-task-fails-upgrade-3750-image and tried to get the customer to try the following:
Solution:
      Timeout needs to be increased for a device or entire device type group from Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings
          ReadDelay – 200ms
          Telnet Timeout – 800s(This timeout is applicable for both TELNET and SSH)
And the customer was able to do run the scheduled job after changing the time settings with TFTP, not with SCP. Any ideas about the reason that SCP does not work? Any additional configuration needs to be done from the switch side?
Thanks in advance,

Hi guys,
Any ideas on this?

Cisco ACS 4.1 Windows License Key Question

How do I obtain the license key for my Cisco ACS Server for Windows software v4.1?

For acs windows, there is no license key. You need to purchase the acs software.
During installation, it does not ask for any key.
Regards,
~JG
Do rate helpful posts

Cisco Web Security Virtual Appliance Demo license?

Is there a demo license available to test Cisco Web Security Virtual Appliance?
Regards.

Thank you so much Kasper! You are an angel fallen from heaven!
Just 1 question, when I am ready to get the License appears the next information, do you know if the number 1 in the Qty column means 1 demo for just 1 user? Or do you know if I can get 1 demo for many users?
Regards!
NA
SKU Name
Qty
Ordered
Available
Quantity Added
-->License Start Date:
License End Date:
1
WSA-WSP-45D
1-->
1
-->1
03/13/2014
04/27/2014

UCCX 9.x - Problem to upload DEMO License on vmware install

Hi Guys,
I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
Enter a license or zip file name
License File*
Validating uploaded license file...
Warning: No valid license feature lines found in the uploaded license(s).
Validation completed.
The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
The demo license was download from Cisco, and I used the license MAC to generate the license.
Any have Idea about this issues? Where stay the config repository?
Thanks,
Wilson

Hi Anthony,
Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
Thanks,
Wilson

Demo License for Virtual Image of Web Security

Hello,
I had downloaded the latest image for Virtual WSA.
But I am not able to get the demo license for that.
It is showing the message "Access to the page resitricted."
Thank you -- and you helpp will be appriciated..
regards
Hozefa

Hello,
You should have privileges as long as you are logging into the site using your CCO ID. If you do not have one please register for a CCO ID on www.cisco.com and you should have access to get a demo license. If you are logging in with your CCO ID and its still giving you the error message then you will need to reach out to your Cisco Account manager to provide the demo license. I apologize for any inconvenience this causes.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091

Demo License key issue in Cisco Content Secuirty managment Virtual appliance

Similar Messages

Maybe you are looking for