Demo license of NCS

Hi,
I am migrating WCS to PI 1.3.
I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.
but the demo license is only 100 unit, but my WCS has 300 license units.
How can I import the wcs data to NCS?
Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3
can I install the patch before i import the data from WCS?
thanks.

I never used a demo license when doing a migration. Typically you need the same ap license when migrating but all NCS will do is complain. As far as the migration goes, install the license prior to doing anything. Export the WCS which needs to be on 7.0.220.0 or later and then import that to NCS. Then you need to patch NCS before upgrading to Prime infrastructure. Now when you get your license, you will need to order the prime license. If your using a VM, make sure you take a snapshot before you install the patch and upgrade just incase something failed or else you will be rebuilding NCS and importing the data again.
Sent from Cisco Technical Support iPhone App

Similar Messages

Unable to Migrate WCS Database to NCS with Demo License

I have NCS 1.1.0.58 running on a VM with a demo license, should I be able to migrate my WCS 7.0.230.0 database to NCS? I can not tell if the migration process worked and there are no objects in NCS. I have attached a console capture of the migration console messages.
Thanks in advance,
Bob

You have probably thought of this already but, If the tables are the same in both sides why don't you just work out the population order and export directly from Access into the empty oracle tables using ODBC?
The way I do it is to create transition tables in oracle then have a script to load the tables and do some validation and error checking.

In-house test and demo license

Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
Here is the information for Test&Demo license:
IDES Test & Demo License
It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

Hello Veeren,
Hope this helps:
Q. How to obtain access ?
Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
Q. How long does this process take ?
In our case, it was less than a week.
Q. What's the cost ?
We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
Q. How well does the system work ?
The system was quite fast and the access is via ITS / SAP GUI for HTML.
Q. Do you get access to only the built-in data or you can create your own ?
Besides the XI Server, it was an IDES system in our case and we were also able to create data.
All the best for your certification.
Regards,
Parag.

Problem with Demo License

Hi,
I install the version 6 update 2 on my Solaris 7 sparc, with the demo license. But when I try to use cc I got this error
License Error : Licensing product (Sun WorkShop Compiler C SPARC).
License File:
/opt/SUNWspro/bin/../WS6U2/bin/../../license_dir/sunpro.lic,node
License file does not support this version
Feature:workshop.c.sparc
Application version > License version:6.000000 > 5.000
FLEXlm error:-21,126.
Any idea?
Thanks

HI,
Please check and make sure your license file
"sunpro.lic,node" is indeed having the demo
license Forte 6 Update 2.
It appears from these errors that this may not be
the case.
Hope this helps.
Thanks,
Gopinath.

CUCM 10.x Demo licenses

Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

Cisco UCCX 9.0.2.10000-71 - Demo License Issues

Hello Cisco Support,
I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2.
I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
Below is the information for my setup:
admin:show uccx version
Active UCCX Version: 9.0.2.10000-71
Inactive UCCX Version: NA
admin:show uccx license
Configured Licenses:
Package: Cisco Unified CCX Premium
IVR Port(s): 50
Cisco Unified CCX Premium Seat(s): 25
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Quality Manager Seat(s): 25
Cisco Unified CCX Advanced Quality Manager Seat(s): 25
Cisco Unified CCX Workforce Manager Seat(s): 25
Cisco Unified CCX Compliance Recording Seat(s): 50
Cisco Unified CCX Maximum Agents: 400
Cisco Unified CCX Licensed Outbound IVR Port(s): 25
For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
Command successful.
Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
Warm regards,
JK.

Hello Aman,
Thanks for the link.
How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
Warm regards,
JK.

UCCX 10.6.1 - Expired, Auto-generated Demo license crashing MCVD-LIB_LICENSE startup process?

Anybody else experiencing this?
I upgraded from version 9.0.x to 10.6.1 at the end of December. It generated a Demo License (that wasn't needed) during the upgrade, which expired on Feb 27th.
I restarted the engine on the HA node last night, and it won't start up now.
On start-up, MCVD Log shows:
6953: Mar 09 10:55:03.978 EDT %MCVD-LIB_LICENSE-7-UNK:General Runtime Error in using m_FlexlmParser details are : Exception=java.lang.NullPointerException
The process stops reading/parsing licenses after this and acts like it would if it had no license.
Good thing this wasn't my primary engine.

Yes,
That's what I ended up having to resort to. I had numerous demo licenses across the years because of rapid expansion of call volume (agent seat temp licenses to act as a bridge gap while permanent licenses were purchased and delivered).
It ended up being caused by two demo licenses that expired on the same day, it seems.
Just to add to your answer though... DO NOT DELETE THEM FROM THE GUI. This will put your engines out of service until all offending files are deleted, and may require a reboot even then.
Thanks...

UCCX 9.x - Problem to upload DEMO License on vmware install

Hi Guys,
I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
Enter a license or zip file name
License File*
Validating uploaded license file...
Warning: No valid license feature lines found in the uploaded license(s).
Validation completed.
The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
The demo license was download from Cisco, and I used the license MAC to generate the license.
Any have Idea about this issues? Where stay the config repository?
Thanks,
Wilson

Hi Anthony,
Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
Thanks,
Wilson

AnyConnect for Cisco VPN Phone demo license

I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5520 VPN Plus license.

Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley

CUCMBE5K - 8.5.1 Node Demo License

Hi all,
I have a CUCMBE5K platform that has an issue where the Node License is running as a Demo license. I do not know how long it has been in this state since I have just recently started a new job. According to this article, a demo license that is used in production on 8.5.1 does not have a time limit, but it will limit the system to 50 DLU's.
On my platform, it appears there are 260 DLU's currently active which have a status of uploaded. What I'm trying to find out is, what are the true limitiations of the node demo license? We are getting ready to open a new office and I am concerned that I will not be able to continue adding DLU's to the system until the node license is resolved. I have had extreme difficulty in trying to get a partner to supply us with a proper node license.
Thanks in advance,
Stephen

Got a question.
I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
Any help is always appreciated.
Sent from Cisco Technical Support iPhone App

SAP B1 8.81 Customer Demo License Key Request Link

Hello ,
Could you please specify the link and steps to request a temporary Customer Demo License Key in SAP B1 8.81 ?
Thanks
Dinesh

hi,
pls follow the ff steps.
1. Get your Machine Hardware Key
2. Contact your SAP Partner to Request a temporary License key
alternatively you can visit this link but you need S-Account to access this page
https://websmp208.sap-ag.de/smb/sbocustomer
regards,
Fidel

Adanced Malware Protection AMP - Demo license ESA C170

My customer has an ESA C170 appliance in production and he wants to try the AMP funcionality.
How can I get an Adavanced Malware Protection AMP demo license for the Email security Appliance C170.
Thanks in advanced
Diego Prada

You will need to get the following feature key applied from GLO, avail in 1Y, 3Y, and 5Y...
GLO should also be able to provide a 30-day temp/trial key, if requested.
You will need to reach out to GLO and request the demo license/feature key to be added to the serial, if hardware - or to the virtual license number (VLN) if a virtual appliance.
Global Licensing Operations (GLO):
https://tools.cisco.com/SWIFT/LicensingUI/Home
Licensing FAQ
Phone: 1-800-553-2447, opt 3
Request to have a case opened for GLO/Licensing.
Their email directly is: [email protected]
-Robert

Can I use ISE demo license for wireless purposes???

Hi all.
We want to try an ISE deployment with one or two WLC and the license twe want to use initially is the demo embedded in the ISE appliance. We don't know whether we can do it because demo license covers base and advanced capabilities but not wireless (at least in administration/licensing this box shows "not installed" leyend) and we don't know whether a demo tape of wireless solution will work with this type of licensing; if not, is it possible to get a demo wireless license for ISE?
Thanks.
Best Regards.

The evaluation license does cover the wireless. Its actaully a full license.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

CUCM Licensing/ordering and demo licenses

Hello,
I am trying to setup a lab with CUCM and trying to figure out the process to place an order for CUCM. I know that you need DLU licneses for each phone, however do I need to buy a base license in addition to that? How does it work?
Also, does CUCM come with a demo license which I can use for my lab without ordering any additional licenses??
What are my options?
I alos tried to search the part/product numbers for CUCM ordering but was not able to find them on Cisco site. I am interested in buying CUCM 7.x.
Thank you.

Hi there,
The Part# you would be looking for is;
CM7.1-K9-LAB
SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only
This comes with licensing for 2 Nodes, Software (DVD's) and 100 DLU's which
is good for approx. 20 phones I believe the End of Sale for this is June of this year.
Cheers!
Rob
"Everything is broken" - Bob Dylan

Problem with WSA demo license

When a do this:
https://tools.cisco.com/SWIFT/LicensingUI/Quickstart#. -> Get Other License-> Demo and Evaluation->
Security Products-> Cisco Virtual Appliance Demo License->Cisco Web Security Appliance (WSA) Virtual Appliance 45 Days Demo License
I see the massage attached in pic.
How can a get 45 days demo lisence for WSA?
tnx

Your Cisco a/c didn't have permission to get demo license.
You need to ask your local Cisco Sales representative

Demo license of NCS

Similar Messages

Maybe you are looking for