Demo Scenario's in IR

Hello all,
When I log into my Integration Repository I see a demo scenario called: SAP SRM Server 5.5 with several namespaces for e.g. http://sap.com/xi/EBP
What I want to know is, if there are guides for the Integration Scenario's and Integration Processes which describe the meaning and if there are guides on HowTo configure the scenario's in the Integration Directory.
Best regards

Hi,
This will help you
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
This blog talks the steps needed for configuring a simple File->File scenario:
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards
Agasthuri Doss

Similar Messages

Error while executing demo scenario ProxyToProxy (for SAP PI 7.1)

I've try to execute demo scenario ProxyToProxy (from Simple Use Cases (SAP NetWeaver PI 7.1) at Getting Started With Service Bus-Based Integration [original link is broken] ). I call transaction SXIPATT1, enter suitable data and click "Send". In result, error message "OBJECT_IS_NO_PROXY Object CLASS_NAME CO_SXIPAT_XI_PATTERN_IF2_OUT is not a proxy object" displayed. Can you help me to resolve this problem?

I get the same exact error.
I went to SPROXY transaction. I can not figure out where to find message interface and how to activate it. Can you please give me steps. Like which menu I should go under to see that option?
Help will be greatly appreciated. I an a newbie and spent too much time could not figure this out myself.
Thanks in advance.

XI demo scenarios for SAP ECC 6.0

Hi!
I succesfully installed SAP ECC 6.0 (IDES with several clients) and would like to implement some simple XI demo scenarios in order to interchange the data from one client into another client via XI.
What is the best Getting Started scenario and where can I found the documentation therefore?
Thank you very much!
regards
Holger

Hi Holger,
According to me , the simple scenario to start with will be File to Proxy.
Search on SDN as to how to configure Sender file adapter ( use this link [Configuring the sender file Adapter|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm] )
and then search how to configure Receiver XI Adapter to communicate with R3 system ( use this link [Configuring Receiver XI Adapter|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm] )
Best Regards,
Sushil.

Demo scenarios in Environmental Compliance

Hello all,
Can anyone please help me with some standard demo scenarios for Water balance moniroting and Energy balance monitoring processes in EC module?
I am at client site and trying to map these scenarios in EC module.
Regards,
Niraj

Hello Amol,
Thanks for reply.
We have a scenario of mapping a water balance in system.
There are few sources of water and few points where the water will be consumed. The equation would be to sum up water collected at all the sources and deduct consumption amount from it. Balance would be opening for next day.
Can you please help me mapping this scenario?
Is there any standard scenario / demo scenario for water balance and Energy foot print available? If so, where can I find the same?
Regards,
Niraj

SAP ECO demo scenario

hi,
i've been going through the REAL ESTATE SALES component under SAP ECO (engineering construction and operations).
i've tried searching for best practices regarding real estate sales for a demo example scenario, but was unable to find on the help portal.....kindly advise where can i find it.
thnx.

Hi,
have you checked the materials available on the Service Marketplace: http://service.sap.com/eco ?
Hope that helps!
Message was edited by: Ivaylo Ivanov

ISE NFR kit is a preconfigured VM. How to integrate it on existing demo scenario?

Hello,
Just got an ISE NFR kit.
I actually thought that this would just as any other Cisco product where you get a license that will limit your amount of registered devices.
Instead we get a preconfigured VM, tuned and tweaked to work on a corp.rf-demo domain.
The problem that I have that will lead to my question is:
- I have set up a fairly complex scenario using ISE on Evaluation license, using own lab/demo infrastructure, meaning specific DNS, AD, PKI, etc.
- from past tests I have discovered that ISE will NOT accept you changing the FQDN of the machine on the CLI, as internal variable substitution is done based on the initial setup FQDN - for instance for CWA or CPP URL redirection.
- I'd really like to simply license the scenario I already have so that it become part of our somewhat permanent demo showroom.
My questions are:
- is it possible to simply get a NFR license that you can install on a VM, and turn an Eval deployment into an NFR one? Cisco Licensing just told me that the NFR part number is non-licenseable. Does anybody have another idea?
- instead, is it possible to successfully change the FQDN name of the ISE NFR VM into whatever FQDN we need it to be, in case I do find the time to rebuild the entire configuration in this VM?
I have tried adding the NFR VM into my existing deployment as a secondary Admin node, but its license just got overriden by the eval one, as it should.
I'm assuming that if I backup the existing deployment and restore it to the NFR VM, the license will also get overriden. Can anybody confirm?
Thanks for any help/ideas.
Gustavo

Hello Gustavo,
If you resolve this please assist me :
1) Is it possible to customise the NFR version of ISE?
2) would we be able to get an extended evaluation license, both base and advanced, to apply to our lab ISE node.?
ISE NFR 1.2 software - logging not working after changingIP address of ISE. It is not possible to delete the "Remote Logging Targets" which includes itself and the IP address 10.1.100.21. Please advise on how to customize.

IDoc to IDOC , Proxy to Proxy demo scenarios

Hi!
Can some one recommend some practical sdn-blogs/documentation for the demo XI scenarios such as:
IDoc_to_IDoc, Proxy_to_Proxy, etc.
I have a SAP ECC 6.0 ABAP system (IDES system with two business clients) and SAP PI.
Thank you very much!
regards
Holger

Hi
for proxi- to-proxi scenario's refer these links
http://help.sap.com/saphelp_nw04s/helpdata/en/67/2edd3f597af206e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/8ae03fc2269615e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/5d/2add3f597af206e10000000a1550b0/frameset.htm
and also refer these
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ed7284-22e5-2910-0b85-bb39428e5ab3
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00de46da-8b8b-2a10-a1a0-c328b2034b5e
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/809a4f1a-f8cb-2a10-42bf-cf2338590d8b
hope this helps
regards,
surya

Demos scenarios and config based on what kind of company?

We are still trying to make a case for buying the Discovery Server. My management has come back to me with a question.
What kind of industry are the demos that are included with the Discovery server based on?
example - Finance and Public Service( banking; healthcare; insurance ...); Manufacturing ( Consumer Products; chemical ...) or Service (Media; Professional; retail...)

Hi Teresa,
the examples on the Discovery System v2 are keep quite generic on purpose. It was the intention to offer content that has some sort of cross-industry relevance. Thus the Service-Enabled Procurement Scenario could be relevant for any industry that needs to do some purchases.
And there are a number of composites that are targeted for end-users specifically, that try to improve their 'every day life' (SAP xApp Analytics and SAP xApps for Personal Productivity).
Hope that helps,
rAimund

Demo scenarios in SAP PI 7.1?

Hi All,
is there any step by step explanation of demo interfaces provided by SAP. I need the link of the explanation of the interfaces as in detail. else please provide the how to guide link for specific interfaces in PI 7.1

I doing this examples too.
file have name "PICONFIGDEMO.pdf" its in sdn.sap.com. take from there.=) Good Luck!

SAP SEM-BCS demo or practical scenario

Hi!
I have first experience working with SAP BI and have implemented several BI demo scenarios in SAP BI 7.0.
Now I would like to implement a SEM-BCS scenario.
I have a SAP ERP 2005 IDES system and SAP NetWeaver BI 7.0 system.
Can some one recommend how to getting started in this area?
- SDN blogs
- SAP courses
- other suitable documentations
Any helpful informatio will be very appreciated and awarded by points
Thank you

I concur with Dan.
Additionally, you may use sap help:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/62/f7e73ac6e7ec28e10000000a114084/frameset.htm
Though, without a practice in the system I doubt that it we'll be helpful.
Some blogs. Actually, for beginners, one that I know is here:
/people/sap.user72/blog/2006/07/21/how-to-upload-hierarchy-and-master-data-of-fs-items-in-sap-sem-bcs-40-by-using-flexible-upload-method
I didn't see any good documentation (books nincluded) yet.
And certainly the forums dedicated to consolidation. One within the active ones is that were you are now.

Links in Demo manual do not work

I have completed the quick start guide on our system.
I am trying to use the links in the Demo manual, but when I click the links, nothing happens, and ideas please

Hi Ludwig,
Thank you for letting us know about the issue with the links in the document. We will work to fix it.
I believe the document you are referring to is called "SAP Discovery Demonstration Access" which can be found at the bottom of the How To Set Up your Discovery System page and not the "Quick Guide", as the "Quick Guide" doesn't contain any links to demos/scenarios.
In the mean time please go to the Out Of The Box Demonstrations section on the website, you will see there the links to all the demos:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/5f3caa50-0e01-0010-73b2-ceb94c05e8a1 [original link is broken]
Regards,
Itai

DEMO presentation (ERP - transportation of people company)

Dear SAP expert,
I am preparing a DEMO presentation for the transportation company.
It is a public company (people transportation). They are going to implement first functionality of ERP, due to they have a employees (HR), fixed assets (busses) (FI-AA), stock (AP-MM), GL and CO, but what I need is the presentation where I can show the interface between SAP ERP and some system for ticket handling.
I have a found that SAP client in this industry is Arriva which is in the same business.
Could you please deliver me some material, success stories, DEMO scenarios which can be suit for this case?
Thanks in advance.
Best Regards,
Slavisa

Hello Jaime
I guess you are talking in Brazilian context.
Without knowing the context fully, I will approach it as a SD consultant and not as a country specialist.
2 proposals:
1) Use the same pricing condition (ICM1) in your LE Pricing procedure with alternative calculation type formula 323 as done in SD. See pricing procedure RVXBRF - Step 300 for reference.
Probably this does not work as it expects a Base amount to exist somewhere.
2) Then again insert the same condition ICM1 wherever you want in your LE pricing procedure. Devise your alternative calculation type formula with this logic:
a) Find out the related SD document from the doc flow.
b) Using the Number of the document condition (VBAK- KNUMV), read the value of the condition form table KONV for condition type ICM1.
Sounds too simple, am I missing something? Sure,,.
Let me know how it goes for you.

Error in Configuration Scenario

I am testing a File to File demo scenario. While genearation of the log file I am getting error stating
"Error whille creating collaboration objects in configuration scenario..". Can somone help me out.

venkat
this could be possibly due to may be u have missed somthing in creating the collaborative process, sender sgreement,receiver agreement.
Also see :
/people/vera.gutbrod/blog/2006/12/04/what-you-need-to-know-about-the-new-forums-in-sap-netweaver-portal
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
Pls : Reward points if helpful
Vishal

IDES scripts/scenarios

I recently (with the help of SDN Forums members) completed an installation of an ECC 5.0 IDES instance. After logging in and verifying that the IDES master data is present as expected, I started looking for the documentation that described how that master data can be used to show off various activities (e.g. demo scenarios).
I have searched extensively on Service Marketplace, help.sap.com, and SDN for this information but am unable to find it. Can anyone help me locate these scripts?

Hello Michael,
it is not so wrong. I think <a href="http://help.sap.com/saphelp_46c/helpdata/en/af/fc4f35dfe82578e10000009b38f839/frameset.htm">IDES - The SAP Model Company</a> can help you.
Regards
Gregor

Demo InfoCubes

Are there any demo InfoCubes that I can activate and load data. On a brand new installation of the ECC side that has not yet data, can the demo Cubes retrieve data from the ECC side. Does SAP provide data from the ECC side for demos wihtout waiting for the system to be configured and has transaction data?

Hi
The BI Content provides several demo cubes, like:
0D_COPA (SAP CO-PA Demo)
0D_DECU (SAP DemoCube)
0D_DX_C01 (Demo Scenario DalSegno Company Sales Data)
0D_DX_C02 (SAP Demo Scenario DalSegno Company Lost Deals)
0D_DX_C03 (SAP Demo: DalSegno Company Plan Data Scenario)
0D_FI_C01 (SAP Demo FIAP: Transaction Data)
0D_FI_C02 (SAP Demo FIAR: Transaction Data)
0D_IB_01 (SAP Demo Installed Base - Sales)
0D_IB_02 (SAP Demo Installed Base - Licenses)
0D_PP_C01 (Planned/Actual Comparison Order/Material View)
0D_PU_C01 (Purchasing Data)
0D_SD_C03 (SAP Demo Sales and Distribution: Overview)
The SAP Best Practices Demo & Evaluation page refers to the following scenarios :
http://help.sap.com/bp_biv335/BI_EN/html/demo_page.htm
Sales Analysis (Sales Overview)
Purchasing Analysis
Manufacturing Analysis (Capacity Load Utilization)
The corresponding files are stored on the CD SAP Best Practices for Business Intelligence and would load the following InfoCubes (which are not Demo Content InfoCubes!):
0SD_C03
0PUR_C01
0PP_C13
Hope this helps
Regards
CSM Reddy

Demo Scenario's in IR

Similar Messages

Maybe you are looking for