DEMO XI SCENARIOS

hi,
i am working for vle integrated sol hyd.
can any body send me some xi scenarios or documents for client demo with real(similar to) time business scenarios. or links in internet.
thanks and regards.
vijender

Hai Vijender,
What type of scenario do u need, i am having all type of documentaions also
links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
regards
harsha
****Reward points if u found useful*********

Similar Messages

LVM demo system scenario fails in CAL

Hello,
We created an instance of the LVM demo system in Cloud Appliance Library (SAP Landscape Virtualization Management 2.0, Enterprise Edition based on NetWeaver 7.4 SP5)
The scenarios described in chapter 6 (Provisioning) fail - which is regrettable since these are for us the most interesting ones to show in a demo.
The probable error root cause is a DNS update error in step 1, causing all following steps to fail
Is this a known issue with a correction or workaround?
Thanks in advance for your assistance
Frank Van Overloop

Hello Mr. Van Overloop,
please try to to the following:
Login as Administrator with the Password you entered during CloningProcess
Select Infrastructure -> Network Components -> Select Network -> 'Edit'
Select the line 'DevNet'
Change the Broadcast Address to 127.12.255.255
Change the Gateway Server to 127.12.0.1
Change the value for the 'Update IP Range' to 127.12.0.1-127.12.254.254
Select the line 'ProdNet'
Change the Broadcast Address to 127.10.255.255
Change the Gateway Server to 127.10.0.1
Change the value for the 'Update IP Range' to 127.10.0.1-127.10.254.254
Select the line 'QANet'
Change the Broadcast Address to 127.11.255.255
Change the Gateway Server to 127.11.0.1
Change the value for the 'Update IP Range' to 127.11.0.1-127.11.254.254
Select 'Save'
Alternatively you can import file attached to this SCN Post
Select Setup -> Export, Import, Reset -> Import
Enter the path to the mentioned file
Choose Load Configuration
Best regards,
Andreas

SAP ECO demo scenario

hi,
i've been going through the REAL ESTATE SALES component under SAP ECO (engineering construction and operations).
i've tried searching for best practices regarding real estate sales for a demo example scenario, but was unable to find on the help portal.....kindly advise where can i find it.
thnx.

Hi,
have you checked the materials available on the Service Marketplace: http://service.sap.com/eco ?
Hope that helps!
Message was edited by: Ivaylo Ivanov

IDoc to IDOC , Proxy to Proxy demo scenarios

Hi!
Can some one recommend some practical sdn-blogs/documentation for the demo XI scenarios such as:
IDoc_to_IDoc, Proxy_to_Proxy, etc.
I have a SAP ECC 6.0 ABAP system (IDES system with two business clients) and SAP PI.
Thank you very much!
regards
Holger

Hi
for proxi- to-proxi scenario's refer these links
http://help.sap.com/saphelp_nw04s/helpdata/en/67/2edd3f597af206e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/8ae03fc2269615e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/5d/2add3f597af206e10000000a1550b0/frameset.htm
and also refer these
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ed7284-22e5-2910-0b85-bb39428e5ab3
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00de46da-8b8b-2a10-a1a0-c328b2034b5e
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/809a4f1a-f8cb-2a10-42bf-cf2338590d8b
hope this helps
regards,
surya

List of all possible integration scenarios

Hi.Good Morning.Can anyone send me a list of all the possible Integrations Scenarios of XI ? A list of mostly used Integration Scenarios as well. Thank You. Gowtham..

Hi Gowtham,
This is just a demo flight scenario..
http://help.sap.com/saphelp_nw2004s/helpdata/en/1c/287842f9e03654e10000000a155106/frameset.htm
See this one too.. Nice one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
All the best!
cheers,
Prashanth
P.S Please mark helpful answers

Supply Chain Event Management: Transportation visibility scenario

Hello, we're trying to set up a transportation visibility scenario based on R/3 LES 4.6C and SCEM 4.1.
We would like to generate an Event Handler for every shipment and then report events related to expected events like outbound deliveries assignment to the shipment, start of shipment, ..., end of shipment.
Has anyone already implemented such a scenario?
Is it possible to create an EH without assigning a delivery? When I assign a delivery, a new EH is generated or I can simply generate an event and update the shipment EH?
The standard function module for event data extraction /saptrx/xet_le_road_tra10 is available as of 4.7 but not in 4.6C. Is it possible to use it in 4.6C?
Thanks for your help. We'd like to share some ideas. Regards. Luigi

Hello Luigi
We are also trying to create a similar process of creating event handler for every Outbound Delivery. What we noticed is No EH is getting created inspite of maintaing all the settings mentioned in the CG. I wanna specifically ask is there any particual extractor we need to copy and change code to suit the scenario. Does it require any Extractor to be written in EM. The problem here again for our scenario we have OBP10_Deliv as one extractor... but we also need to mention the Cntrl, Info, System, Tracking Id, Query ID extractors.
Is there something SAP directly provides with the package as lot of Demo Delivery Scenarios just suggest " Package comes all ready we just need to put user specific logical systems etc.."

ADF graph refresh

Hi,
I am new to ADF and while learning, I am stuck in a problem and couldn't find a solution since long.
I
am explaining my demo project scenario as below , sorry for making it long .....................
I have two java class, ClassID that returns IDs of the student in an arraylist and ClassMarks that returns sum of marks for that ID(it returns Id and sum(marks) as arraylist. I have created data model for these two classes, using rt clk and 'create data model'.
Next, I created a JSF page and on the top I dragged the IDs data model method as 'select one choice'. Below that I dragged the marks method for the 2nd class model as a dvt bar graph
I added a button from the control palette .
In the button action I am adding the selected ID from the SOC into session variable. The end logic for the graph class is that it will pick the value from the session and based on the ID, it will fetch rows from database and return an array list of ID and marks. and create a graph.
But the problem i am facing is that, when the first time page loads, it loops through the datamodel for the ID and graph. and creates the page without any graph as no value was there in the session. when I select one ID and hit the submit button, the graph doesnot refresh with the new values.
Please help me out. I tried googling and read forums but every where it is shown as ADF BC from table and i have not used that.
Thanx in advance.

Hi,
I am new to ADF and while learning, I am stuck in a problem and couldn't find a solution since long.
I
am explaining my demo project scenario as below , sorry for making it long .....................
I have two java class, ClassID that returns IDs of the student in an arraylist and ClassMarks that returns sum of marks for that ID(it returns Id and sum(marks) as arraylist. I have created data model for these two classes, using rt clk and 'create data model'.
Next, I created a JSF page and on the top I dragged the IDs data model method as 'select one choice'. Below that I dragged the marks method for the 2nd class model as a dvt bar graph
I added a button from the control palette .
In the button action I am adding the selected ID from the SOC into session variable. The end logic for the graph class is that it will pick the value from the session and based on the ID, it will fetch rows from database and return an array list of ID and marks. and create a graph.
But the problem i am facing is that, when the first time page loads, it loops through the datamodel for the ID and graph. and creates the page without any graph as no value was there in the session. when I select one ID and hit the submit button, the graph doesnot refresh with the new values.
Please help me out. I tried googling and read forums but every where it is shown as ADF BC from table and i have not used that.
Thanx in advance.

Xi document

hi:
i'm new to this domain.could i get some demo documents/scenarios in xi with description.if possible could get demo scenarios related to both proxy and using adapter engine.
thank u.

Hi Prashanth
Link of some blogs which explain some of the scenarios are :
File to File
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
File to JDBC
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
File to RFC
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
IDOC to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Scenario for understanding BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
For Understanding Proxies these are some links
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Hope it helps.Please don't forget to give points.
Regards
Arpit Seth

RNIF..Query

Hi
I need to create a Demo using RNIF adapter.I plan to use R/3 for one end of the 3B2 PIP process..What kinda system can I use for the other end as Buyer/Supplier.If someone has created a demo/actual scenario, can you advise me on the same.
Regards
Sriram V.

Hallo Sriram-
Some of the testing for Business Package for RosettaNet used the RosettaNet Self-Test Kit (RNSTK or STK). Please see: www.rosettanet.org search for Self Test Kit
or try this link:
"http://www.rosettanet.org/RosettaNet/Rooms/DisplayPages/LayoutInitial?Container=com.webridge.entity.Entity[OID[8ECC4A0DBD0ED045A17048CFF5AC3550]]"
I hope this helps you get started! If there is additional SDN community interest I can put a weblog showing an actual implementation...
regards,
jg

GATP - MISL Functionality Not Wroking

Hi
We are implementing GATP and were trying to demo MISL Scenario. Despite all the requisite settings, i get no confirmation inspite of the fact that stock exists at the given location as well as the alternative locations. When called from R/3, i get to a screen where it shows no confirmation. Upon tracking the rule from there i can find the rule assigned. But somehow it is not picking the stocks at these locations nor suggests an alternative location. Moreover it is difficult to get hold of any config doc on MISL. Please help.
Thank You
Rajiv

Hi
First of all thanks for replying to my message
I think i have carried out the instructions. I will point out wat all i have done:
In SPRO Settings for RBA Check
1. Maintain Field Types
2. Maintain Access Sequence
3. Maintain Condition Type
4. Maintain Rule Strategy
5. Assign Rule Strategy
6. Activate MISL
Then in Integrated Rule Maintenance
1. . Create Location Subst Procedure of type 3 and define the locations which MISL SHould Consider. I have used two locations.
2. We create Rule of type MISL
3. Assign this location subst procedure to rule of type MISL
4. Assign a Rule Control to this Rule of Type MISL
5. Create another rule of type inclusive - Now in the document sit is mentioned "create rule of type MISL and another rule of type inclusive." Now i am not sure how we are supposed to define this inclusive rule.
a) DO we link it in some way to MISL rule
b) WHat Substitution Procedures do we define for this inclusive rule
c) WHat Rule control we assign to it.
OR
Is it just that an inclusive type of rule must exist without any relevance to MISL rule. I don't think this would be the case as this actually doesn't make sense to me)
6. Create Rule determination - Here i have assigned the rule of MISL Type to the COndition Type. DO we have to define it for the inclusive rule ???
Now when In R/3 i carry out following steps:
1. VA01 - Create Sales Order
2. In the sales order screen i enter 2 different products at one plant (which is present in the locations subst procedure)
3. Now I click on shipping to define it for complete delivery and also to assign delivery group (Is this the right way??)
4. I get an information message saying "No SUbst for Product with Rules Immediately"
I am totally lost as to where i am going wrong. I have worked on Prod and Loc subst in RB ATP but am working for the first time on MISL. I have gone through watever is available on saphelp on MISL but am still not able to configure.
It would be great if you could write steps to configure MISL
Thank You
Rajiv

Sun Team: Please help me regarding the login action previously i posted

Hi sun team i have posted one thread recently. Please verify my code and guide me whether it is correct or not. And if any changes needed Please help me out regarding this.
http://forum.java.sun.com/thread.jspa?threadID=5118906&tstart=0
Thank You in Advance

We do have a sample app that demos this scenario.
Please check out:
http://developers.sun.com/prodtech/javatools/jscreator/reference/code/sampleapps/index.jsp
Databases: Two Page Create, Retrieve, Update, and Delete (CRUD) Database Operations with Table Display
Two Page CRUD with Table Display is an application that demonstrates how to perform create, read, update, and delete operations on a cached rowset data provider. The data provider is bound to a JavaServer Faces table component. Rather than having functionality confined to one page, this application has two additional pages, one for creating a trip and another for updating a trip.
http://developers.sun.com/prodtech/javatools/jscreator/reference/code/sampleapps/2/TwoPageCrudTable.zip
http://developers.sun.com/prodtech/javatools/jscreator/reference/code/sampleapps/2/2update1/TwoPageCrudTable.zip
Hope this helps,
Sakthi

Sourcing on demand

Experts,
Please explain how sourcing is done on demand in E-Sourcing. I understand that in SRM, its done by creating the shopping card. How can sourcing be done on demand in SAP E-Sourcing.
Please help
Thanks,
Sharmele Somu.

Hi,
Please see this site for more details. There are Demos, information, scenarios on when On Demand Sourcing is useful etc.
http://sourcing.ondemand.com/demo.php
Please let us know if there are any other specific questions and we can help.
Thanks
Vikram
Edited by: Vikram Shukla on Feb 28, 2012 5:35 PM

SAP Cloud Appliance Library for Partners

I am trying to sign up for SAP Public Partner Demo Showroom but can't seem how to do this. It keeps taking me to Solutions, but doesn't seem to have what I want in there.
Can someone assist?
Am using the https://cal.sap.com and then Unlock Full Library
Thank you

Hi Dusanjh,
Actually SAP CAL covers the SAP Private Partner Demo Showroom scenario. Hope that this is what you are looking for.
You can find all the relevant materials here: https://partneredge.sap.com/en/partnership/sales/demo/showroom.html#private
Also I would recommend to get in contact with your PSA. Please let me know if you'd like to be approched via a private mail.
Best regards,
Stanimir

Demo on SAP Transportation Management - Domestic Outbound Transportation - Multistop Scenario by Navin Nadpurohit-SAP TM Consultant - Krypt Inc-a Leading SAP Supply Chain Company

Hello All,
Attached is the link explaining the SAP TM - Domestic Outbound Transportation - Multistop scenario end to end.
Link:
Domestic Outbound Transportation - Multistop Scenario - YouTube
Thanks and best regards,
Navin

Very Good Demo Navin

Error while executing demo scenario ProxyToProxy (for SAP PI 7.1)

I've try to execute demo scenario ProxyToProxy (from Simple Use Cases (SAP NetWeaver PI 7.1) at Getting Started With Service Bus-Based Integration [original link is broken] ). I call transaction SXIPATT1, enter suitable data and click "Send". In result, error message "OBJECT_IS_NO_PROXY Object CLASS_NAME CO_SXIPAT_XI_PATTERN_IF2_OUT is not a proxy object" displayed. Can you help me to resolve this problem?

I get the same exact error.
I went to SPROXY transaction. I can not figure out where to find message interface and how to activate it. Can you please give me steps. Like which menu I should go under to see that option?
Help will be greatly appreciated. I an a newbie and spent too much time could not figure this out myself.
Thanks in advance.

DEMO XI SCENARIOS

Similar Messages

Maybe you are looking for