DEMOSYSTEM and developer key

Hi,
I set up the DEMOSYSTEM, SAP NetWeaver 2004s Sneak Preview, Full ABAP, on my computer. I want it can be used for development training. I would like to create different users with development rights. How to do so ? Is it possible ? I tried to copy the BCUSER, but such rights are not copied.
A solution can be to create a client for each users, but it seems to be heavy.
Does anyone know another way to develop on the DEMOSYSTEM with several users ?
Thanks in advance.

That's right, you can not get a developer key for this system. You must use the supplied one for BCUSER. You can however have more than one person log on at a time for training.
Regards,
Rich Heilman

Similar Messages

OSS Id and Developer key info needed

Hi Experts,
We raised a request to create a OSS Id for our server to SAP BASIS team. They created a OSS Id, but we couldn't see our system's IP address in marketplace site with the Admin person's( The person who created our OSS Id) userId. So, they couldn't create developer key for our server. I think that the Admin person had done some mistakes.
The OSS Id what they have created is not for our server, this we came to know from his Service marketplace userId. We don't have proper OSS Id, so that they couldn't create developer key. What is use of developer key? If we don't have proper OSS Id and no developer key then, what all problem we have to face for PI 7.0 and ECC 6.0 access.
The PI server was working fine for sometime, but now we are getting cache issues and BPM scenarios are not reflecting in the SXI_CACHE. Is these issues because of the OSS Id and developer key or some Post-installation steps are missed out?
We are going to install PI 7.0 and ECC6.0 and we need a proper OSS Id this time. Do we need to mention our server IP address while raising the OSS Id request to SAP marketplace?
Regards
Sara

OSS id is just a sapservice logon and is related to you companny agreement wih SAP and with assigned to your company installation numbers.
With this OSS id you can then :
-Create SAP systems under selected installation numbers - this allows you to request licenses and
upgrade keys for the system
-Register developers for this sap systems ( developer key)
and many moore
Regards,
Wojtek

Is VOFM Access key and Developer Key are different

is VOFM Access key and Developer Key are different
Please help me on this

Developer key is user-specific which gives a particular user the developer rights, such as program creation/modification. It is enough to enter the developer key only once for a user.
On the other hand VOFM/ Object key is object-specific which can be used to edit a SAP standard program Or create a new program in SAP name space(in case of routines).
Both keys can be registered and obtained from Service Market Place.
Regards
Karthik D

Creation of developement class,package and access key

COULD ANYBODY EXPLAIN about
creation of developement class,package and access key
and who will create them?

Working With Development Objects
Any component of an application program that is stored as a separate unit in the R/3 Repository is called a development object or a Repository Object. In the SAP System, all development objects that logically belong together are assigned to the same development class.
Object Lists
In the Object Navigator, development objects are displayed in object lists, which contain all of the elements in a development class, a program, global class, or function group.
Object lists show not only a hierarchical overview of the development objects in a category, but also tell you how the objects are related to each other. The Object Navigator displays object lists as a tree.
The topmost node of an object list is the development class. From here, you can navigate right down to the lowest hierarchical level of objects. If you select an object from the tree structure that itself describes an object list, the system displays just the new object list.
For example:
Selecting an Object List in the Object Navigator
To select development objects, you use a selection list in the Object Navigator. This contains the following categories:
Category
Meaning
Application hierarchy
A list of all of the development classes in the SAP System. This list is arranged hierarchically by application components, component codes, and the development classes belonging to them
Development class
A list of all of the objects in the development class
Program
A list of all of the components in an ABAP program
Function group
A list of all of the function modules and their components that are defined within a function group
Class
A list of all of the components of a global class. It also lists the superclasses of the class, and all of the inherited and redefined methods of the current class.
Internet service
A list of all of the componentse of an Internet service:
Service description, themes, language resources, HTML templates and MIME objects.
When you choose an Internet service from the tree display, the Web Application Builder is started.
See also Integrating Internet Services.
Local objects
A list of all of the local private objects of a user.
Objects in this list belong to development class $TMP and are not transported. You can display both your own local private objects and those of other users. Local objects are used mostly for testing. If you want to transport a local object, you must assign it to another development class. For further information, refer to Changing Development Classes
http://help.sap.com/saphelp_46c/helpdata/en/d1/80194b454211d189710000e8322d00/content.htm
Creating the Main Package
Use
The main package is primarily a container for development objects that belong together, in that they share the same system, transport layer, and customer delivery status. However, you must store development objects in sub-packages, not in the main package itself.
Several main packages can be grouped together to form a structure package.
Prerequisites
You have the authorization for the activity L0 (All Functions) using the S_DEVELOP authorization object.
Procedure
You create each normal package in a similar procedure to the one described below. It can then be included as a sub-package in a main package.
To create a main package:
1.       Open the Package Builder initial screen (SE21 or SPACKAGE).
2.       In the Package field, enter a name for the package that complies with the tools Naming Conventions
Within SAP itself, the name must begin with a letter from A to S, or from U to X.
3.       Choose Create.
The system displays the Create Package dialog box.
4.       Enter the following package attributes:
Short Text
Application Component
From the component hierarchy of the SAP system, choose the abbreviation for the application component to which you want to assign the new package.
Software component
Select an entry. The software component describes a set of development objects that can only be delivered in a single unit. You should assign all the sub-packages of the main package to this software component.
Exception: Sub-packages that will not be delivered to customers must be assigned to the HOMEsoftware component.
Main Package
This checkbox appears only if you have the appropriate authorization (see Prerequisites).
To indicate that the package is a main package, check this box.
5.       Choose Save.
6.       In the dialog box that appears, assign a transport request.
Result
The Change package screen displays the attributes of the new package. To display the object list for the package in the Object Navigator as well, choose from the button bar.
You have created your main package and can now define a structure within it. Generally, you will continue by adding sub-packages to the main package. They themselves will contain the package elements you have assigned.
See also
Adding Sub-Packages to the Main Package
http://help.sap.com/saphelp_nw04/helpdata/en/ea/c05d8cf01011d3964000a0c94260a5/content.htm
access key used for change standard program.
www.sap.service.com

Developer key and adobe server.

Hi all,
I'm developing a website that make use of the RTMFP technology. To start with, I am using the cirrus RTMFP server, with my own developer key. But once the website development finish, and I open it for the whole internet, could I still use the cirrus RTMFP server and the same developer key for free as now?
Thank you.

Thank you for your answer!
You can also take a look on this thread http://forums.adobe.com/message/3826392#3826392
"In Cirrus (codename) has no limits to the number of concurrent users you can have connected with your developer key, although we ask that you let us know if you'll have more than about 10,000 concurrent users
and maximum possible number of connections on AWS services is 10,000.
BTW, WebRTC is coming...

Developer key, Access key and OSS key

Hi Experts
When i am trying to create a z programs it is asking Access key.
Can anybody please tell what is Developer key, Access key and OSS key and difference among them.
Thanks in advance
Sekar

Hi,
There is no need to pay for developer key or object access key. You can get them from service market place under Keys & Request tab and SSCR. You need to have a valid S-User with proper authorization to generate the keys. Below is the link for the same where select the Keys & Request and under that SSCR Keys. Then from there you can generate Developer and object access keys.
https://websmp209.sap-ag.de/support
Regards,
Sharath

Developer Key for MiniSAP

Gurus:
Does anyone know how to get a Developer Key for MiniSAP?
I had successfully installed MiniSAP and have been coding ABAP for a month...now I had to update the License for MiniSAP and since I have successfully installed the new license (good for 90 days), now when I enter SE38 to modify or create my code it asks for a Developer's Key (also called a License Key).
If I go to OSS with my S-User that doesn't work either, as DEMOSYSTEM is not a registered system to ask for a key.
I'm stumped....any guidance would be deeply appreciated, as at the moment...no coding possible.
(I could reinstall MiniSAP, but then I lose all my code) eh?
Thank you!
Al Perkins
P.S. I do see the key # in the table DEVACCESS, but when I type in that key for BCUSER...well...nothing....doesn't accept that key.

Where would we be without Google! Unreal...I found the answer to my question and am now up and running just fine.
For those interested follow this link: http://bit.ly/a6VAWQ

Developer Key on NSP Client 100

Hi All
Today I just finish my ABAP trial installation and start to create a Hello World program in the Client 001.
The system asks for a developer key then I go to http://service.sap.com -> SSRC Keys -> Register Developer key.
I can't find the DEMOSYSTEM installation id in my S-User.
How can I register ?
Thank you,
Halomoan

Hi,
You will have to select the relevant Installation Number and not the system ID.
One more thing to notice, it is not advisable to make any changes in the SAP's standard/default client 000, 001 and 066.
Regards,
Varadharajan M

MiniSAP - Problems with developer key

Hi @all,
today, I started installing the Minisap System on my PC. (SAP NetWeaver Sneak Preview on MaxDB).
After the installation I logged on to the System with the User "BCUSER".
I started t-code "SE38" to start developing some ABAP programms.
Now, I have to insert a valid developer key, which I can - according to the Installation Guide - find on<a href="http://www.sap.com/technology/minisap">http://www.sap.com/technology/minisap</a>.
The key I found there is: 29671482393151224771
So I entered this key in the field, but my System said, it was an invalid key.
Can anyone help me with this problem?
I checked many potential nonconformities, but had no success:
- I definitly inserted the correct key found on the website, because I used the copy and paste function.
- I restarted both the instance and after that the whole pc.
- I installed a new valid 90-day license key from SAP
- My SID is definitly "NSP", Installation-Number: "DEMOSYSTEM"
Does anyone has an Idea, how I can resolve this problem? Is there another developer key available for the NSP WebAS 6.40 System?
Thank you for answering
Best regards
Ralf

Thank you,
I tried to solve my problem on the way you said, but again, the error message "invalid key" appeared.
Is it possible, that there is a general problem with my installation?
Is there anyone else with the same problem?
Regards
Ralf

Buttons and enter key problem

hello,
there are a few projects of enterprise quality which I am developing in java swing. I found out through research that many or rather most people involved with java believe that swing is ready for enterprise class robust desktop applications.
so I as the team leador am starting my new projects in java swing.
I personally find that the amount of java libraries present provide a rich set of functionality and it gives big mussle power to the developers.
I am only concerned about one problem which many of you might have solved.
I find that I have to hit the space bar instead of enter key to fire an action. in languages like vb I can press enter key to fire the click events. specially in menu items I certainly don't expect my clients to press the spacebar. besides there are many people who are so used to the keyboard and enter key in particular that it will be hard or rather next to impossible to change their habbits.
how can I make the menu items work with the enter key. I mean do I need to create the code for keypress events every time I also create an action performed method? or is there a way where I can do it without extra coding.
it is just that I don't want to right extra code for enter key along with click events.
one more important note.
I am a blind person and I use the access bridge technology of java.
so when I am involved in coding, I use the same.
so may be my problem isn't a problem in the first place.
kindly provide me some help
thanks
Krishnakant.

The enter-key works on menu-items in all my applications. It did so since I started with java few years ago.
Maybe some other problem (OS-specific) ?

How can I give me the access to create a developer key in the market?

Hi!
I'm new in the basis area and I don't have access to create a developer key. A consultant need a developer key.
How can I give me the access in the market place to create it?
Thanks!

Hi
You need to get the access key from SAP.
Refer to the procedure of obtaining access keys from SAP in BASIS.
Security
Regards,
Raj

Pop List and Developer Toolbar

Hi every body,
I love HTML DB , It a cool and nice thing
I need your help folks,
1. How can I hide the developer toolbar for some user.
2. How can I build one page showing master-detail rel, I need to show Depts as a select list then when I select a certain deptartment the bottom of the page shows the related employees and have the ability to change the sal and comm columns only.If it is not possible then I am satisfied with two pages with the same functionality.
thanx

<omar>
1. How can I hide the developer toolbar for some user.
</omar>
<raj>
sergio explained this at Some newbie questions . please take a look and let us know if you have questions.
</raj>
<omar>
2. How can I build one page showing master-detail rel, I need to show Depts as a select list then when I select a certain department the bottom of the page shows the related employees and have the ability to change the sal and comm columns only.If it is not possible then I am satisfied with two pages with the same functionality.
</omar>
<raj>
here's an easy way to setup a master-detail form on emp/dept as you've described it:
1) create a tabular form page on EMP using the "Tabular Form Wizard" being sure to select only the Sal and Comm columns in the "Updatable Columns" field of the "Identify Updatable Columns and Primary Key" page of the wizard.
2) add a Dept lov to your wizard-generated tablular form (let's say it's page 1)
------create the new item (let's call it P1_DEPTNO) with a type of "Select List with Submit"
------define the LOV for this Dept item as something like "select dname, deptno from dept"
3) add a branch to the page to have the page redraw itself when a value if a value is selected from the LOV above
------create the branch with a type of "Branch to Page or URL" that branches back to itself (page 1 in this case)
------set the branch up with a "Condition Type" of "Request = Expression 1" and have "Expression 1" be the name of your item, P1_DEPTNO
4) add a where clause to your tabular form query so it pays attention to your selected Department
------"where (to_char(deptno) = :P1_DEPTNO or :P1_DEPTNO ='%null%')" should do it for now
and that should do it.
</raj>
let us know if you need further assistance,
raj

Disable Mouse and other Keys except Number and Directional keys in a screen

Hi all,
Recently we have developed a sceen program as per the requirements of client who are used to enter meter readings using only Enter key. They used to give Enter key to give meter readings, date of meter reading, meter reading note and consumption in their legacy system.
Though we developed the screen as per the requirements with all validations checking simultaneously which are required but we failed to handle mouse and other keys as we have not found any specific events occured by the keys.
Now some of the meter readers are using mouse and other keys and because of this our code is getting failed and no validations are working at all. So we want to disable the mouse and other keys except Number keys and Directional Keys while we are in the screen so that they are bound to work with the Enter and NumKeys as per their requirements.
Please help me with an idea or code snippet by which we can solve the problem. <removed by moderator>
- Arghya Das,
<removed by moderator>
Edited by: Thomas Zloch on Aug 10, 2011 12:46 PM

Hi,
Just go through this link, it would be helpful...
[http://help-abap.blogspot.com/2008/10/alv-disable-delete-key-on-keyboard-in.html]
<removed by moderator>
Thank You,
Regards
Pradeep
Edited by: Thomas Zloch on Aug 10, 2011 12:50 PM

Removal of Developer Key entry from DEVACCESS Table.

Hi,
On table DEVACCESS, in QTY/DEV/Prod there is one person with Developer Key listed that I would like to remove, User is no more working and now we want to delete the entry from this table which has the User name followed by the Developer key assigned.
Could any one guide me in deleting the Developer Key access from the DEVACCESS table.
Satish.

Another alternative is to use SE11 to create a maintenance view (ex: ZV_DEVACCESS). Secure the maintenance view with a custom authorization group. With the maintenance view you have the ability to use SM30 to maintain the DEVACCESS data.
That keeps the DEVACCESS table from changing and thus no need to register the change with SAP.
Cheers,
Brian

After getting the Cirrus developer key what is the next step To connect to the Cirrus service in php

i have generated the developer key and now i want to connect to the Cirrus service, open an RTMFP NetConnection to rtmfp://p2p.rtmfp.net using your developer key as the first connection parameter in php

you use RTMFP in Flash Player with ActionScript.

DEMOSYSTEM and developer key

Similar Messages

Maybe you are looking for