Denied for Venture Card with strange explanation

What is PC?

sjw wrote:
Has anyone ever heard this before? I was deined for a Capital One Venture card and this is what it said: Thank you for applying for a credit card issued by Capital One®. Unfortunately, after reviewing your application and information obtained from your consumer credit report(s) from the agencies detailed on the back of this letter - we cannot approve your request at this time. The reason(s) for our decision are: • Based on your application information, Capital One account credit limit(s) are too high Has anyone ever had this denial reason? What does it even mean? i have a QS1 with a $7000 limit and C1 Platinum with $3000. Certainly I havent exceeded any crazy ammoun with them? I really dont understand this and when I called to inquire I was told they cant tell me anything about it over the phone and I would have to contact the credit bureau. Is there anything I can do about it? It's probably based on the income you reported to them, along with a DTI calculation of your overall monthly payments. Capital One can be very stingy sometimes. They tend to be very generous if you have higher income and few revolvers.

Similar Messages

Denied for Target card...

I have a target 1/2 mile down the road so I stop there almost every day for various items. In any case, I figured I might as well save 5% every time so I applied while in line last night. The cashier said I would receive my card in 7-10 days and handed me the printout. I noticed it said "further review," so I called only to find out I was denied for too many inquiries?! Including Target, I have 5 on EQ, no negatives and 800+ ficos. I was livid at the time, but have since calmed down to come and ask - is there anything I can do? The only reason for denial was the inquiries, so I'm wondering if anyone has any advice on how to recon? Thanks!

FinStar wrote:
Lyythine wrote:
I have a target 1/2 mile down the road so I stop there almost every day for various items. In any case, I figured I might as well save 5% every time so I applied while in line last night. The cashier said I would receive my card in 7-10 days and handed me the printout. I noticed it said "further review," so I called only to find out I was denied for too many inquiries?! Including Target, I have 5 on EQ, no negatives and 800+ ficos. I was livid at the time, but have since calmed down to come and ask - is there anything I can do? The only reason for denial was the inquiries, so I'm wondering if anyone has any advice on how to recon? Thanks!Now, this is quite shocking to say the least. With the exemplary account collection, scores and everything in your portfolio? Well, I suppose we're dealing with TD Bank anyways. Now, I don't know what would have been worse, say approved for $500 (maybe even higher with your excpetional profile) or being declined altogether. If it were me, I'd prefer being declined Sorry to hear about the experience. I'd gladly trade you my Target Visa for one of your beauties, like the JPM Select I was actually expecting the $500 limit, so that would not have been that big of a surprise, however, I am now over it - Thanks for the offer though, Fin

Approved for Venture card (Visa signature), 10K limit!

My white whale is the CSP and I apply once per year and get declined everytime. I have a freedom with a toy limit, $500. I've had it for almost 2 years and they never increase my limit. I decided that I would app for the Slate and I was approved with another toy limit, $500. I figured that I had pretty much maxed myself out for the number of credit cards I was eligible for (I now have 8).Well, I went to capital one and saw the venture card and thought, why not. Well, to my shock I was approved for 10K. I was floored. In my long life, I haven't had a credit card with a limit higher than $1800. It is my understanding that Chase likes to see, among other things, that you have a credit card with at least 5K. I'm hoping this new Venture limit will allow me to get a CSP in about a year.Also, I believe that I should consolidate my other credit cards onto the Venture. Question: Is it better to leave the venture with zero to 10% usage and leave my other cards with balances? Or, transfer all balances to the venture, putting it at 75% usage, while my other cards will be at 0% ? BTW, myfico TU is 695 and I am at 90% usage on all other cards.

New job & multiple cards at 90% is definitely not the time to apply for premium cards then. Get those balances paid way, way down & as many as you can completely paid off. In 6 months, you might be able to get that "Holy Grail" card you keep trying for.shasta wrote:
I haven't exactly been frivolous with my credit card debt. I was laid off for the 3rd time in about 5 years and decided that I needed to change careers. I had to buy tools, consumables, fuel and things like that while I was learning a new trade. I couldn't find reliable work in my new field and so far haven't paid off the credit card debt that I ran up. Things are looking up though, I was just made a job offer today and if it works out, I should be able to pay debt off in about 6 months.

Need help for equipments for java card with RFID technology .

I 'm doin a project using java card with RFID technology.Can ne one give me exact equipments for java card reader & writer for RFID technology?
I need to buy these things from UK.Can ne one provide me some product list & as well as the exact pricelist?
plz reply me asap.

I 'm doin a project using java card with RFID
technology.Can ne one give me exact equipments for
r java card reader & writer for RFID technology?I guess with "RFID" you are referring to "contact-less javacards"?
If yes, one keyword for you is "Mifare", a industry standard for smartcards with dual interface (contact-based and contactless).
Jan

Old DLL made for old card with filesystem - Help!

Hi,
I have an old DLL that is used to access an old smartcard with file system. The DLL is using standard ISO calls like Select, Read etc. from these files. I am now finishing an applet with filesystem created as byte arrays which works fine BUT. How can I make these files visible to the DLL? Are the old ISO filesystem calls still there or do I catch the these APDU commands and handle them my self within the applet?
And, where can I read about these calls and whether they still work on "pure java cards"?
Pls help :-)

Thing is, I have en old DLL that has been in use for many years! Card is no longer available so now switching to java platform. DLL must still be able to communicate with card for "file access". I have not got a clue what commands the DLL sends but know what the data looks like. This is the reason for looking at what the DLL does. When I know, I am asking: Can I handle the APDU commands from this DLL that before went to the file system directly, in my applet? AND to learn more about the old file handeling, where can I read about those APDU commands, such as select write & read?

How to fix permission denied for home folder with Apache in Mavericks?

I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Installation steps
To set up the webserver, I took the following steps:
1. activated the webserver with command: apachectl start
2. enabled PHP by checking if the module is loaded
3. checked if the home folder module is loaded
4. made the user based configuration file, in /etc/apache2/users/nazeem.conf The content is as follows:
<Directory "/Users/nazeem/Development/Websites/">
Options Indexes MultiViews FollowSymLinks AllowOverride All
</Directory>
Permissions
~/nazeem : drwxr-xr-x+ ~/nazeem/Development : drwxr-xr-x ~/nazeem/Development/Websites : drwxr-xr-x
Log
The apache log says the following:
[Mon May 19 21:22:57 2014] [error] [client ::1] client denied by server configuration: /Users/nazeem/Sites
In my opinion this is remarkable, as the path /Users/nazeem/Sites is nog what I defined in my user configuration.
Versions
OS X Mavericks 10.9.3
Apache 2.2.26
Does anybody know how to solve this?

nzm_aak wrote:
I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Does anybody know how to solve this?
You will have to contact the author of that tutorial and ask. Apache can be configured an infinite number of ways. You seem to be attempting to configure it in two conflicting methods. You can define specific directories on your web server or you can use mod_userdir. You can't hack up a combination of the two.
I posted my own User Tip on how to configure Apache: https://discussions.apple.com/docs/DOC-3083
This user tip only covers mod_userdir and will serve content out of $(HOME)/Sites. I strongly suggest starting there and only trying a custom location later, if you see the need.

Using generic drivers in 64-bit mode for eSATA card with Marvell 88sx7042

Hello, all. I'm wondering if anyone knows of a way to plug the eSATA card's pnp info into, for example, one the plugins in the IOATAFamily kext so that it will mount in 64-bit mode. I've tried this, and simply inserting the supplied kext in the IOATAFamily kext -- the card is recognized in 32-bit mode, but in 64-bit mode, the card is recognized, but System Profiler reports that no drivers are installed. Of course, my generic JMicron card will load, but it is not Port-Multiplier aware, which renders it useless as the relevant external is a hardware RAID. TIA for any replies.

Does this help
http://support.apple.com/kb/ht3443
It does not cover Mavericks but you may get some ideas.
Have you got AppleCare or had the machine less than 90 days, if so give Apple a call.

Capital One Venture Card approval proccess

So I helped my wife apply for the Cap One Venture card with the 40k bonus offer. The screen shot stated "You are approved" you will receive your card in 7-10 days but did not give any other info such as CL etc. When I applied for that same card I was immediately notified that I was approved and my liimit was 20k. I contacted the 800 number and the recording said that the application was under review. I assume that is under review in regards to determining the initial CL and APR? Any thoughts, experiences with applying for this card.

Congrats on both approvals! In my wallet: Capital One (secured) 1917; Quicksilver 5000; Venture 15,000; Barclay Apple Rewards 2000; CareCredit 3300; Bank of America Platinum Visa 2000; Bank of America Travel Rewards 3500; Bank of America Travel Rewards 3500; Amazon Store Card 5000; Discover 10,000. Total Credit: 51,217.
6/19-FICO: EQ - 782; TU - 769; EX - 681; GOAL: 780 across the board. Gardening until further notice.

Access denied for folder when permissions set with WMI

Hi,
When I add/modify access rights based on the Win32_ACE class, there seems to be a difference in the result, then when setting it with the GUI in Windows.
The situation is as follow:
I want to set Modify access on a remote folder, but also want to avoid deletion of the folder itself. This can easily be done by setting "deny delete on this folder only" in addition to "allow modify to this folder, files and subfolders".
So far no issue.
Now I notice that, although the GUI shows exactly the same result in advanced settings of the security property, the folder set with WMI script gives a deny when opening it with the user account. The same folder, set with the same security and result in
the advanced tab, but set in the GUI, works fine.
Note: The reason that I use WMI is because the remote system is a standalone machine, not sharing the same domain or trust.
I compared the ACEFlags, AceType and AccessMask for both the GUI set and script set permissions, and they are exactly the same.
GUI => AccessMask:1179817 AceType:0 iAceFlags:3
Script => AccessMask:1179817 AceType:0 iAceFlags:3
What a strange world we live in... :-)
Any idea?

What Operating System Interface are you referring? What program?
You are being obtuse. What is it that you are trying to compare. THe settings in WMI cannot be directly compared to anything in the Security Wizard.
¯\_(ツ)_/¯
Just the properties of the folder in Windows on the security tab. The result is the same for both the permissions set with the interface as well as the one set with the WMI script. The two references you see are just taken with WMI:
Set by Windows interface => AccessMask:1179817 AceType:0 iAceFlags:3
Set by WMI script => AccessMask:1179817 AceType:0 iAceFlags:3
This are the values "AceFlags", "AceType" and "AccessMask" from management class WIN32_ACE:
http://msdn.microsoft.com/en-us/library/aa394063(v=vs.85).aspx
I just want to show that the actual ACE object returns the same values for both methods, but the effect appear to be that the script set permission are denied. And I am looking for the reason why.
Can you provide the script that you're using to create the ACE(s) and add them? If I'm understanding what you're trying to do, there should be two ACEs created: one to allow the modify access and one to deny the folder deletion. The ACE you're showing is just
an allow ACE (AceType 0).
That is correct there are (or should be) two ACEs. I cannot get hold on my source right now (will be later today), but my code is based on this source:
http://www.minasi.com/forum/topic.asp?TOPIC_ID=7501
What I basically do is getting the DACL properties, loop through it to check that the user exists that I want to update. If it does I check that the current AceType is of the same type (allow or deny) that I am updating/adding. If that type is a match, I
replace the ACE object with the new Flag, Type and Mask using a Win32_ACE object. If type type doesn't match, then I add both the current ACE with the new ACE at the same time. I noticed that if I don't do it at the same time, only the last remains. If the
user doesn't match I check that the AceFlags is not equal to 16 (inherit) and then add the original ACE object in the ACE array. At the end I add the new ACE if the user was not found at all (new). The array of individual ACE objects is added to List of managementobjects
and then again linked to the DACL value.

Communicate by NI-GPIB card with an instrument that was designed especially for HP-GPIB

I have an instrument (Data Link Test Set by Apogee Labs) that has GPIB interface and a book of commands.
I have a NI-488.2 card and I try to send commands with the MAX. The device is identified but it respond to the commands by blinking its display and strange hex answer.
The manufacturer said they have no problem like that, but they tested their GPIB interface only with a HP card and not NI card. This is a big problem for me, because it's all part of a deal, and the customer want to have it with NI.
What possible solutions do I have in order to communicate this instrument with NI card, though it was designed only for HP card.

Hi Toti,
GPIB and HPIB are the same thing. They are different names for the IEE 488.2 communication standard. The 488.2 specification is an extension of 488.1 and it is backwards compatible. IEEE 488.2 uses the same electrical specs and low-level states machines. You are probably refering to IEEE 488.1 as HPIB.
IEEE 488.2 defines a set of required commands. MAX uses the ID query command *IDN? to retrieve the instrument ID string. With a non-488.2 compliant instrument the interface is capable of sending and receiving information to the device, but in the particular case of the MAX 'scan for instruments' option the instrument won't recognize the *IDN?. This is way you are getting a error message in the instrument. In MAX you are detecting the instrument
, but it says that it didn't respond to the *IDN? query.
To test the device, review the instrument's documentation and determine the ID query command (if any). It might be something like 'ID?'. Then use the MAX 'communicate with instrument' utility or the interactive control (ibic) to send the correct command to the instruments.
The botton line: you should be able to communicate with this instrument.
DiegoF
National Instruments.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

TS3297 I tried to purchase an app for my IPad with a gift card that only had 85 cents on it. It of course wouldn't take and now I can't cancel the info. It won't allow me to order any more apps or upgrade my old apps and the purchase info won't cancel or

I cannot order new apps or upgrade old apps. iPad keeps asking for info for a card I no longer use and it won't csncel.

Seems pretty obvious you need iWork and it is not expensive. However, I am always suspicious of downloading files from the internet. A 'pps' file should open with Microsoft Power Point.

HT5035 Why, when trying to download a "free" app from iTunes after it say's, "this apple id hasn't been used with the iTunes store" does it keep asking for credit card info???

This is so frustrating! I have an itunes store account, etc. I lost all my info when I had to "restore" my iphone.
I wasn't able to do the "restore" until recently, gosh it was about 6mos or more ago when my iphone died...
So, as I get older I am having memory problems and haven't been able to access my itunes account.
Obviously when I did the "restore" on my iphone I lost all my info with it... So, wanting to use my iphone for
music, games, etc. I had to create a new apple id, fine, but when I wanted to download a "free" app it says
my apple id hasn't been used with itunes so it keeps asking for credit card info.
I do not remember ever having to have a credit card before!
I am so frustrated... First it was not being able to access my account then having to create a new one, fine!
But now I can't download "free" content without credit card information!?!?!?!?!?!?!?!?! UGH!!!!!!!
Please, can anyone help...?!?
Sincerely,
"Distressed"

If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534

HT2731 How do I set up an Apple ID for a child with gift card credit

How do I set up an Apple ID for a chld with a gift card credit, without credit card details and without using my own account?

Go to the main iTunes Store page (within iTunes), click on the "Redeem" link on the right side of the page, click "Create Apple ID", and enter in the code from your card when requested. You should be able to create an iTunes Store account for your child without needing a credit card. You'll just need an email address for him/her to create the ID, though it can be a "temporary" one that you don't intend to really be used. You can change the email address to which receipts are sent to an account you really wish to use.
Regards.
Message was edited by: varjak paw

How to structure the DMA buffer for PXie 6341 DAQ card for analog output with different frequencies on each channel

I'm using the MHDDK for analog out/in with the PXIe 6341 DAQ card.
The examples, e.g. aoex5, show a single Timer (outTimerHelper::loadUI method), but the example shows DMA data loaded with the same vector size.
There is a comment in the outTimerHelper:rogramUpdateCount call which implies that different buffer sizes per channel can be used.
(the comment is: Switching between different buffer sizes will not be used)
Does anyone know what the format of the DMA buffer should be for data for multiple channels with different frequencies ?
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?

Hello Kenstern,
The data is always interleaved because each card only has a single timing engine for each subsystem.
For AO you must specify the number of samples that AO will output. You also specify the number of channels. Because there is only one timing engine for AO, each AO will channel will get updated at the same time tick of the update clock. The data will be arranged interleaved exactly as the example shows because each AO channel needs data to output at each tick of the update clock. The data itself can change based on the frequency you want to output.
kenstern wrote:
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?
In your example, you need to come up with an update rate that works for both waveforms (1 KHz and 1.5 KHz sine waves). To get a good representation of a sine wave, you need to update more than 10x as fast as your fastest frequency...I would recommend 100x if possible.
Update Frequency: 150 KHz
Channels: 2
Then you create buffers that include full cycles of each waveform you want to output based on the update frequency. These buffers must also be the same size.
Buffer 1: Contains data for the 1 KHz sine wave, 300 points, 2 sine wave cycles
Buffer 2: Contains data for the 1.5 KHz sine wave, 300 points, 3 sine wave cycles
You then interleave them as before. When the data is run through the ADC, they are outputting different sine waves even though the AO channels are updating at the same rate.

Denied for Venture Card with strange explanation

Similar Messages

Maybe you are looking for