Denim update has broken accelerometer on Lumia 930 (UK CV). Anyone experiencing this?
Hey all,
After the denim firmware update my 930's accelerometer starting lagging badly (2 or 3 seconds). This is either on games or just the normal screen rotation.. I found more people with the same problem after the update, so far only in the UK CV.
I haven't found a solution yet, only thing I haven't tried is a hard reset and I'd really like to avoid that. It is really annoying as I'm developing an app that depends on the accelerometer..
I contacted @LumiaHelp on twitter, and they directed me here.
Anyone with the same problem? Resolution suggestions (without hard resetting) ?
Phone status:
- OS Version: 8.10.14226.359
- Firmware revision: 02540.00019.14522.26006
- Mobile Operator: 000-GB
Video showing the problem: https://www.youtube.com/watch?v=3jovOzasyjw
Thanks
Ricardo
Ricardo Caldeira
Hi Ricardo,
This forum is to discuss windows phone development issue. I think your question is about the firmware, I would recommend you post your question on answers forum
http://answers.microsoft.com/en-us/.
Please feel free to let me know if you have any concerns.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.
Similar Messages
-
10.6.8 update has broken quicktime 7 codecs
Hi there
It seems that the 10.6.8 update has broken the codecs that quicktime 7 uses.
We have users here that need to use quicktime 7 pro to export movs etc, and since the update, they cannot play (so far that we have found) movs that are using the photo-jpeg decompressor.
We're using the version from the optional installs package form the dvd.
We've been able to work around this by copying (from a 10.6.7 install) the following folders, over the top of the 10.6.8 image.
/System/Library/QuickTime
/System/Library/QuickTimaJava
/System/Library/Frameworks/QuickTime.framework
/Library/QuickTime
While ive tried to single out which files are affected, it seems copying one of these folders at a time hasnt fixed the problem. Only when (at least) all the /System folders are copied over, then we can start playing the movs that have the broken codecs.
Is this something Apple is aware of? Is there an word of a fix for this? I also hear that optical audio is broken as part of the update - which the solution has been to recopy the kext file back from an older system.
10.6.7 was a show stopper for us - because of the NFS permission problems.. (but QT7 worked)
and now 10.6.8 is a show stopper for us, because QT7 is now broken, but the NFS problems are resolved.
I dont want to have to rebuild our workstations back to 10.6.6 as we had other issues that was fixed with 10.6.7..
Any ideas anyone? Apple dev's?
Cheersi think ive narrowed it down to a single file...
On my 10.6.8 laptop - with the stock QT files... the affected movs wouldnt play...
I copy this file from a 10.6.7 machine...
/System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTime Components
And i can play the files again... -
The iTunes 10.1.6.7 update has broken my foreign font display - Asian characters are now squares.
They are fine on my iPhone, copying to other documents & through the Last FM scrobbler, yet iTunes shows songs incorrectly. I've fiddled with the ID3/Unicode settings - nothing changes.
For example: iTunes shows a bunch of squares, yet when I copy and paste them here it becomes ~ 일렉트로보이즈
This was not a problem earlier - everything was fine in the four years or so I've used iTunes until, I believe, this update. If it was not the update, I'm not sure what else it could be?
Any suggestions on how to fix this? Thank you!Thank you so much! I vigorously searched around these parts and the general internet before posting and found nothing - it's so simple, too
Hahaha, turns out it was Windows, not iTunes, that broke my font -
Software Update has broken my system
Software Update has broken my system so that I can no longer restart or shutdown normally. All attempts to restart or shutdown hang the system with a grey screen and a Software Update menu on the menu bar. The menus can be pulled down, but the menu items, like "restart", are not functional. I have to use the control/command/power keys to force a restart, and then command-R after the chime to get to a screen where I can shutdown.
I have just done a complete reinstall of the operating system (10.7.5), with no change in this behavior. I have also tried to do a manual installation of the latest security update, but after hitting the restart button, the same Software Update screen appears whether I have actually used Software Update or not. How do I go about nudging my system out of this behavior?The startup disk may need repairing.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk
If repairs are necessary, restart while holding down the Command + R keys so you can access ML recovery / Disk Utility. OS X: About OS X Recovery
If the startup disk does not need repairing, start up in Safe Mode
Keep in mind a Safe Mode boot takes longer than a normal boot so be patient. When you're in Safe Mode you should see Safe Mode in red top right side of the desktop.
From there click the Apple menu icon top left in the screen. Select Restart from the drop down menu. -
I am having trouble downloading and updating my apps for my IPad2. I am getting a messahe "Error 1004 try again later". Anyone experienced this?
Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard -
Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?
In the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details. -
IPad (III) dies 4 weeks after Applecare ends. Has anyone experienced this?
One of my iPad (III)'s "bricked" when I proceeded to update to the latest version of iOS 7. It just displays an iTunes logo and a picture of the adapter plug. Wjen I plugged it to my MBP and iTunes, I got the message that the iPad must be "restored" and there is no S/N displayed.
It also happens to be about 4 weeks after the Applecare expired.
Has anyone experienced this behavior?
Thanks for your help.
NareshJust an update on my issue with the iPad.
I observed a problem syncing my other iPad getting some error code -50. After a search on-line and the Apple Support I found a suggestion to change the USB - 30 pin cable then retry.
With that change, my problem in syncing my other iPad went away.
So I tried the same with the first iPad. Presto. I was able to restore the iPad with current operating system software then get all the apps etc. back.
Still no answer why the first iPad went into a "retore" mode after "upgrading" to iOS 7.1.1.
But lesson learnt, when having a connectivity problem, check cable as one of the items.
Thanks again. -
My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?
This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind. -
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?
After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?
for ipad,
if you go to settings-General
You can select between using the side switch to lock rotation or mute. If you select one mute, then the lock rotation icon will show up in the control center. If you select lock rotation, then the mute will show up. THe side switch is then used for the other option. -
When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?
I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed. I tried 3 different brand new cards. All the same. Contact the support is advice I got.
-
My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?
This shouldn't happen. Take it back since it's new.
-
I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later. Has anyone experienced this problem? Any suggestions as to how to correct it?
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Also, go to Settings>General>Usage>Manage Storage and see what is using the storage -
AFter recent upgrade to ios 8.1.1, my iphone 6 no longer makes text alert sounds and ring does not sound for incoming calls (except on car bluetooth). has anyone experienced this, and if so, how did you correct?
I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.
-
Creens from place to place.Has anyone experienced this
My ipad2 suddenly has an outline of a box that jumps from field to field on any screen displayed. Has anyone experienced this?
Go to Settings > General > Accessibility > Switch Control and turn this OFF.
Maybe you are looking for
-
How to reset my iCloud account, How to reset my iCloud account
How can I reset my iCloud account
-
RMAN duplicate target database from active database - performance problem
Hello. I'm running into a major performance problem when trying to duplicate a database from a target located inside our firewall to an auxiliary located outside our firewall. Both target and auxiliary are located in the same equipment room just on d
-
I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.
-
Hi, I have a basic query about CQ5 ,actually i will be getting training on it ,i have the following doubts:- 1)I am a beginner in JAva and related technologies,does one need to be an expert in java to understand CQ5? 2)I have mainly worked on Teamsit
-
Multiple Coldfusion Development Servers
Hi: I would like to run multiple development web servers on different ports on the same machine. Is this possible? Is there a simple ui to do this? or will it be complex config file adjustments? Regards: John